Huawei E173 Not Installing Under Windows 7 Ultimate 64-bit Service Pack 1
Apr 16, 2011
I can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"Upravljački program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
View 4 Replies
ADVERTISEMENT
Aug 4, 2011
Ok, so i have just built my pc and have been finding it impossible to update to service pack 1. The reason given is: Code 80070057 Windows Update encountered an unknown error. I have researched this type of topic for about 2 days now and haven't found any good solution so i'm trying to post myself now. I have run an sfc scan and this is my test results:Here is some more info about my PC.
View 7 Replies
View Related
Jan 7, 2012
Microsoft's online support for downloading service pack 1 seems to end at "Use Windows Update" However, my Windows Update just can;t seem to find it. Is there any way to manually download it or get Update to find it?
View 1 Replies
View Related
Mar 28, 2011
Is there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 Replies
View Related
Nov 20, 2011
Tried to install Service Pack 1 on my machine today and I find it gets stuck as it installs once I've shut it down. I did have to hide one of the updates about a month ago which did the same thing, so I'm assuming it's been put in SP1 and is what's causing it to get stuck. Just tried to view the hidden updates to tell you which one it was, and to ask how to stop it from installing in SP1, but it seems to have disappeared from there, which might be because of SP.Can I find this missing hidden update? Is there a way that I can remove this one update from SP1?
View 2 Replies
View Related
Sep 7, 2012
I am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies
View Related
Oct 1, 2011
Service pack one refuses to install. My computers specifications are available in my profile. I had service pack one installed fine before but I was forced to do a clean install and now it won't install, I've also tried the standalone installer for the service pack. Auto update just doesn't download and standalone installer stops about halfway, around the area where it should ask to restart. Internet explorer 9 won't install either plus any other update from windows update.I'm using Comodo internet security but before I was using MSE and the problem still occurred then.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: ATI Radeon HD 5570, 1024 Mb
Hard Drives: C: Total - 453862 MB, Free - 243497 MB; D: Total - 99 MB, Free - 61 MB; F: Total - 499898 MB, Free - 469472 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-D3, ,
Antivirus: COMODO Antivirus, Updated and Enabled
View 12 Replies
View Related
Feb 23, 2011
I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
View 7 Replies
View Related
Mar 28, 2011
This happened to me on my last build and last night I reinstalled my computer and the issue stopped. Now, after installing Service Pack 1 (it seems), it continues to stop at the welcome screen and forces me to click my user to continue logging in (No Password). Is this handled by a setting or is it an actual issue? I'm running Windows 7 Ultimate 64 Bit.
View 2 Replies
View Related
Oct 23, 2009
My computer went through some problems and I will be getting a new hard drive. Once I get the new HDD I will have to reinstall Vista, which will only have up to service pack 1 included. Do I need to then upgrade to Vista Service Pack 2 before installing my Windows 7 Professional Upgrade, or will it still work on top of service pack 1?
View 1 Replies
View Related
Sep 18, 2012
i get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies
View Related
Apr 9, 2012
I recently purchased a 128gb Crucial M4 SSD. The other day my father and I sat down together to work on setting up the SSD as my OS drive. We installed Windows 7 64bit Home Premium successfully on the drive. There were no issues until I started to install drivers liberally rather then conservatively.While installing ~101 Window's Updates, I impatiently started installing my XFX Radeon 6870 drivers. This caused a crash and a blue screen to appear. After rebooting the system in Safe Mode, everything appeared fine. However, my video card drivers were in a weird funk. After some research, I resolved the issue and my video card drivers were all working and installed successfully.The big problem now is that when trying to Install Service Pack 1, I get an error code upon reboot that says "D_S_S_SUCCESS(0x0)". During the installation of Service Pack 1, the install stops about half-way and wants me to reboot the system, so I do. Rebooting the system is when I get the error code. The screen that pops up says that the install was unsuccessful. I've looked around on Microsoft's website to find some help. So far I've performed the following tasks:
Downloaded a tool by Microsoft called Mrfixit. I've ran troubleshooting that attempts to fix windows update. I've ran disk cleanup to delete temporary files, which won't even delete everything... I've uninstalled any virus software System Update Readiness Tool I've tried renaming the systems distribution folder..(Was this bad?) When I renamed my systems distribution folder to SDold... it created another one... Should I delete my systems distribution folder? Is there anyway to revert this? I hope I didn't ruin anything by doing this. I have no clue what to do next to fix this issue. I'm really concerned I'm damaging my Solid State Drive by all this constant rebooting and installing/uninstalling.
View 1 Replies
View Related
Feb 27, 2011
I downloaded the service pack last night. It installed with no problem. Sort of embarrased to say this, but I have been unable to get into Farm Town on Face Book today. It's the first time I tried since installing the service pack. This has happened on both the desktop and laptop. Both are Windows 7 64 bit.
View 1 Replies
View Related
May 24, 2011
in my list of updates since it was released. However I have put off installing it until the reviews were in.Last nite I decided to bite the bullet and do the install,and lo and behold SP1 is nowhere to be found in the list of available updates?Also checked update history to be sure it didn't get installed sneakily nowhere to be found?Spent sometime on the internet looking,but could find nothing addressing this.Where do I get SP1 now? Microsoft website?Why is it gone from the update list?
View 17 Replies
View Related
Jul 26, 2011
Tried to download twice but it only goes half way.
View 4 Replies
View Related
May 6, 2011
Is anyone else having problems getting the new service pack for Windows 7 installed? I keep getting an error towards the end of the installation. I dont rememeber the error code but it happed on both my laptops I tried to intall it on.
View 2 Replies
View Related
Jan 26, 2012
I never realized it until just now, when I looked through Windows Update. It's been trying to install the service pack update about a hundred times behind my back since LAST JULY. and every time the status is "Failed."
I had checked because I just installed it last night again and shut down my computerr and everything seemed fine. Then this morning I noticed the windows update icon in the taskbar and saw it again even though I just installed it last night and noticed all the failed installations
View 5 Replies
View Related
Aug 10, 2011
I get Error Code: 0x800f0826.
View 6 Replies
View Related
Aug 26, 2011
I have a PC running windows 7 64-bit and I am finding it impossible to get windows 7 Service Pack 1 (SP1) to install. I start the installation and it seems to run for more than an hour and appears to be installing OK; but when I restart the PC I get an error saying that the installation was not successful and it the rolls back to where it was before I started the installation. I have tried to install a numbr of times, but without success.I have also tried:
* Stopping all non-essential start-up items by disabling them booting on startup using msconfig.
* Stopped all firewall and anti-virus from running during installation
* Run the Windows Update System Readiness Tool (kb947821) before the installation
* Run the Windows Update troubleshooter
* Running the installer from within Windows Update, as a standalone x-64 bit installed downloaded from Microsoft, and as an iso file burned to a DVD
* Run sfc.exe /scannow which reported no errors.
Other Windows Updates seem to install OK - it is just the SP1 update that refuses.[For info: I have another PC that I recently updated (clean install) from XP to Windows 7. I had a similar problem on this PC after I had performed all the other Windows Updates and instaleld my normal suite of programs. SP1 also refused to install. In the end, I reistaleld Win 7 from disc and then immediately installed SP1 before installing any other updates or programs. SP1 installed OK. However I do not want to follow this route on my main PC as it has a load of programs installed which will take a few days to reinstall if I have to start from scratch].
View 6 Replies
View Related
Nov 11, 2011
I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)But when I start the Setup, It Redirect to the Load Driver.What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?
View 6 Replies
View Related
Sep 12, 2011
I just got Windows 7 Enterprise N about a week ago. It is for my computer networking class, our teacher also gave us a bit more other software and I am trying to find out what I am doing wrong. I have installed and ran the precursor software from microsoft.com to make sure that my computer is able to use SP1 and I don't have any problems in my registry. It is an official, licensed version and registered, and all the other updates work. I have manually downloaded and tried to install it and still nothing. Where do I start on troubleshooting this?
View 8 Replies
View Related
Sep 14, 2011
I was updating neighbors PC last night and when I tried to install the windows 7 service pack from windows update at the end of the install it would say it failed then when I rebooted the pc it would say configuring windows and when it reached 32% it would stall and then say it was removing updates and reverting, then it would reboot, do the same thing, reboot and do that cycle like 6 times before windows would actually load up like normal. It happens if I download the .exe version or I try to get it from windows update.
Its a dell pc (forgot the model but its newer has a core i7 860 in it). Has windows 7 ultimate 32bit on it.
View 2 Replies
View Related
Mar 9, 2012
Is it possible to install the service pack on a laptop without having it plugged in?I have tried the stand alone update and thru windows update. Keeps saying to plug in my power cord.
View 5 Replies
View Related
Dec 9, 2012
Auto sync launcher needs reconfiguration using service pack 1.
View 1 Replies
View Related
Nov 29, 2011
Every time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem but it I booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changes. Now it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 3 Replies
View Related
Mar 13, 2011
I noticed that after installing SP1, when I subsequently went to run Disk Cleanup, I had 920 Mbs of "Service Pack Backup Files. Upon searching the web as to whether I could delete these 920 Mbs of files with impunity and whether I should, there were many differences of opinion. Since I have often been guided by Tech Support Guy, I thought I would solicit the opinion of all of you. While I do not really need the extra space that removal of these 920 Mbs would provide, since I have 54% of free space, I am just uncomfortable with what I believe may be unnecessary files hanging around on my computer.
View 3 Replies
View Related
Apr 24, 2011
After I reinstalled it, and went on to update the W7 SP1 a strange noise came out of my machine just as it began installing it, and then it seemed like my hard drive crashed, so the PC became unresponsive and I had to shut it down by holding in the button (it tried to recover files when I started it up again, hence my hard drive problem theory).I've since reformatted my machine five times and the exact same thing happens, everything, including hard drive works perfectly until I get to installing Service Pack 1.
View 8 Replies
View Related
Apr 29, 2011
I need to uninstall every update that followed service pack 1, because they have all been causing me problems
View 5 Replies
View Related
Mar 13, 2011
I cannot install the Windows Service Pack 1 on my Windows 7 notebook. I have attached a picture of what it shows after failing to install the service pack after restarting the computer.
Upon clicking the "Go online..." link, I have followed the steps exactly as shown here: [URL] The service pack still fails to install.
View 4 Replies
View Related
Nov 29, 2011
Every time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem bI booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changesNow it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 7 Replies
View Related
Jun 7, 2012
Any idea when windows 7 service pack 2 will come out. Will jit ust be a standard update. or a service pack with some new features I such as where windows can reinstall a fresh copy of itself which is a feature in windows 8 comming out. What version of internet explorer will be included in this service pack.It must be 200 updates since service pack 1 so I wonder how service pack will be different from what i have now.
View 9 Replies
View Related
