Is there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 RepliesI installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
I just got Windows 7 Enterprise N about a week ago. It is for my computer networking class, our teacher also gave us a bit more other software and I am trying to find out what I am doing wrong. I have installed and ran the precursor software from microsoft.com to make sure that my computer is able to use SP1 and I don't have any problems in my registry. It is an official, licensed version and registered, and all the other updates work. I have manually downloaded and tried to install it and still nothing. Where do I start on troubleshooting this?
View 8 Replies View RelatedAfter I reinstalled it, and went on to update the W7 SP1 a strange noise came out of my machine just as it began installing it, and then it seemed like my hard drive crashed, so the PC became unresponsive and I had to shut it down by holding in the button (it tried to recover files when I started it up again, hence my hard drive problem theory).I've since reformatted my machine five times and the exact same thing happens, everything, including hard drive works perfectly until I get to installing Service Pack 1.
View 8 Replies View RelatedOk, so i have just built my pc and have been finding it impossible to update to service pack 1. The reason given is: Code 80070057 Windows Update encountered an unknown error. I have researched this type of topic for about 2 days now and haven't found any good solution so i'm trying to post myself now. I have run an sfc scan and this is my test results:Here is some more info about my PC.
View 7 Replies View RelatedI'm having trouble updating to service pack 1 in Win 7 x64 Home Pre by Dell OEM.
There is another post that the problem can be solved using the log file so I have tried using the Readiness Tool and the log is as followed:
[Code]...
Tried to install Service Pack 1 on my machine today and I find it gets stuck as it installs once I've shut it down. I did have to hide one of the updates about a month ago which did the same thing, so I'm assuming it's been put in SP1 and is what's causing it to get stuck. Just tried to view the hidden updates to tell you which one it was, and to ask how to stop it from installing in SP1, but it seems to have disappeared from there, which might be because of SP.Can I find this missing hidden update? Is there a way that I can remove this one update from SP1?
View 2 Replies View RelatedI am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies View RelatedI can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"Upravljački program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
View 4 Replies View RelatedService pack one refuses to install. My computers specifications are available in my profile. I had service pack one installed fine before but I was forced to do a clean install and now it won't install, I've also tried the standalone installer for the service pack. Auto update just doesn't download and standalone installer stops about halfway, around the area where it should ask to restart. Internet explorer 9 won't install either plus any other update from windows update.I'm using Comodo internet security but before I was using MSE and the problem still occurred then.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: ATI Radeon HD 5570, 1024 Mb
Hard Drives: C: Total - 453862 MB, Free - 243497 MB; D: Total - 99 MB, Free - 61 MB; F: Total - 499898 MB, Free - 469472 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-D3, ,
Antivirus: COMODO Antivirus, Updated and Enabled
I have been receiving and installing updates to my Windows 7 computer for about a year now. So far there have been no problems. About mid year of 2011 I installed SQL Server 2005 Express. Not certain the problem I am having began then or later, like about November 2011.The problem is that Visual Studio 2005 Service Pack 1 update will not install (file size 431.7MB), any ideas why? Does not appear to effect anything else as my computer appears to be running fine.
View 1 Replies View RelatedToday windows downloaded and installed SP1 automatically. After that, the power went off, when it came back and I booted the PC it started updating as it would usually do, it finished updating then rebooted and started updating again, this happened around three times (no failure, just installs over and over again). I became tired so I shut it down and it displayed "Failure configuring Service pack. Reverting changes", after that it rebooted again but began installing the SP once more, I rebooted again in safe mode and it began reverting changes once more only to reboot again and attempt to update once more.Right now it's reverting changes once more and I'm just sitting here waiting and I don't know what to do (also, it's been reverting for quite a long time, around 30 minutes)
View 5 Replies View RelatedThis happened to me on my last build and last night I reinstalled my computer and the issue stopped. Now, after installing Service Pack 1 (it seems), it continues to stop at the welcome screen and forces me to click my user to continue logging in (No Password). Is this handled by a setting or is it an actual issue? I'm running Windows 7 Ultimate 64 Bit.
View 2 Replies View RelatedMy computer went through some problems and I will be getting a new hard drive. Once I get the new HDD I will have to reinstall Vista, which will only have up to service pack 1 included. Do I need to then upgrade to Vista Service Pack 2 before installing my Windows 7 Professional Upgrade, or will it still work on top of service pack 1?
View 1 Replies View RelatedI have a Sony Vaio laptop, maybe 2-2.5 years old. I let it install the updates earlier this afternoon and it needed to restart to finalize everything. I did not have it plugged up but thought there was plenty of battery life so I let it restart and went to do a couple things around the house. I was only gone 10-15 minutes but when I got back it was dead.
So I plugged it up and tried to power it back up. The VAIO screen comes up and then it goes straight to a black screen with a little blinking dash mark in the top left corner. The dash moves down 2 or 3 lines and then just sits there and blinks. I cannot get the computer to do anything else.
Issues with installation of a recently released update from Microsoft
Security Update for SQL Server 2005 Service Pack 3 (KB970892) error code 6D9E fails to finish and install.... have went to microsoft and attempted to download the files, however installation fails during this process as well.... any suggestions?
Current OS Windows 7 Ultimate Build 7600
Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-based Systems (KB973688). I've continuously receive an error stating this update failed. I've been trying to figure what could be the cause. I just purchased a new laptop (Acer - Aspire) that was preloaded with Windows 7. All other updates have been successful. Any advice would be greatly appreciated. Also, has anyone had any trouble with installing MS 2007 software on Windows 7; do you forsee my current issue hindering future MS 2007 install? I'm currently using MS 2003.
View 3 Replies View Relatedi get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies View RelatedI reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
View 6 Replies View RelatedI recently purchased a 128gb Crucial M4 SSD. The other day my father and I sat down together to work on setting up the SSD as my OS drive. We installed Windows 7 64bit Home Premium successfully on the drive. There were no issues until I started to install drivers liberally rather then conservatively.While installing ~101 Window's Updates, I impatiently started installing my XFX Radeon 6870 drivers. This caused a crash and a blue screen to appear. After rebooting the system in Safe Mode, everything appeared fine. However, my video card drivers were in a weird funk. After some research, I resolved the issue and my video card drivers were all working and installed successfully.The big problem now is that when trying to Install Service Pack 1, I get an error code upon reboot that says "D_S_S_SUCCESS(0x0)". During the installation of Service Pack 1, the install stops about half-way and wants me to reboot the system, so I do. Rebooting the system is when I get the error code. The screen that pops up says that the install was unsuccessful. I've looked around on Microsoft's website to find some help. So far I've performed the following tasks:
Downloaded a tool by Microsoft called Mrfixit. I've ran troubleshooting that attempts to fix windows update. I've ran disk cleanup to delete temporary files, which won't even delete everything... I've uninstalled any virus software System Update Readiness Tool I've tried renaming the systems distribution folder..(Was this bad?) When I renamed my systems distribution folder to SDold... it created another one... Should I delete my systems distribution folder? Is there anyway to revert this? I hope I didn't ruin anything by doing this. I have no clue what to do next to fix this issue. I'm really concerned I'm damaging my Solid State Drive by all this constant rebooting and installing/uninstalling.
I have windows 7 x64, I go to updates and it tells there is an important update I installed it and it was succesful I rebooted the computer and it just shows it again, I go to update history it says it was successful but it still says there is an important update I downloaded a fix it thing I don't know the name it was a microsoft fix it thing but it still says it needs to update it?
View 5 Replies View RelatedWHEN I SHUTDON MY COMPUTER, IGET THE MESSAGE "INSTALLING UPDATE 1 OF 1. IT GOES THRU THE NORMAL SHUTDOWN. EACH TIME I USE MY COMPUTER THE SAME THING HAPPENS. I HAVE TRIED VERIOUS WAYS BUT HAVE NOT BE SUCESSFUL IN RESOLVING THIS PROBLEM
View 3 Replies View RelatedI downloaded the service pack last night. It installed with no problem. Sort of embarrased to say this, but I have been unable to get into Farm Town on Face Book today. It's the first time I tried since installing the service pack. This has happened on both the desktop and laptop. Both are Windows 7 64 bit.
View 1 Replies View Relatedin my list of updates since it was released. However I have put off installing it until the reviews were in.Last nite I decided to bite the bullet and do the install,and lo and behold SP1 is nowhere to be found in the list of available updates?Also checked update history to be sure it didn't get installed sneakily nowhere to be found?Spent sometime on the internet looking,but could find nothing addressing this.Where do I get SP1 now? Microsoft website?Why is it gone from the update list?
View 17 Replies View RelatedTried to download twice but it only goes half way.
View 4 Replies View RelatedIs anyone else having problems getting the new service pack for Windows 7 installed? I keep getting an error towards the end of the installation. I dont rememeber the error code but it happed on both my laptops I tried to intall it on.
View 2 Replies View RelatedI never realized it until just now, when I looked through Windows Update. It's been trying to install the service pack update about a hundred times behind my back since LAST JULY. and every time the status is "Failed."
I had checked because I just installed it last night again and shut down my computerr and everything seemed fine. Then this morning I noticed the windows update icon in the taskbar and saw it again even though I just installed it last night and noticed all the failed installations
I get Error Code: 0x800f0826.
View 6 Replies View RelatedI have a PC running windows 7 64-bit and I am finding it impossible to get windows 7 Service Pack 1 (SP1) to install. I start the installation and it seems to run for more than an hour and appears to be installing OK; but when I restart the PC I get an error saying that the installation was not successful and it the rolls back to where it was before I started the installation. I have tried to install a numbr of times, but without success.I have also tried:
* Stopping all non-essential start-up items by disabling them booting on startup using msconfig.
* Stopped all firewall and anti-virus from running during installation
* Run the Windows Update System Readiness Tool (kb947821) before the installation
* Run the Windows Update troubleshooter
* Running the installer from within Windows Update, as a standalone x-64 bit installed downloaded from Microsoft, and as an iso file burned to a DVD
* Run sfc.exe /scannow which reported no errors.
Other Windows Updates seem to install OK - it is just the SP1 update that refuses.[For info: I have another PC that I recently updated (clean install) from XP to Windows 7. I had a similar problem on this PC after I had performed all the other Windows Updates and instaleld my normal suite of programs. SP1 also refused to install. In the end, I reistaleld Win 7 from disc and then immediately installed SP1 before installing any other updates or programs. SP1 installed OK. However I do not want to follow this route on my main PC as it has a load of programs installed which will take a few days to reinstall if I have to start from scratch].
I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)But when I start the Setup, It Redirect to the Load Driver.What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?
View 6 Replies View RelatedI was updating neighbors PC last night and when I tried to install the windows 7 service pack from windows update at the end of the install it would say it failed then when I rebooted the pc it would say configuring windows and when it reached 32% it would stall and then say it was removing updates and reverting, then it would reboot, do the same thing, reboot and do that cycle like 6 times before windows would actually load up like normal. It happens if I download the .exe version or I try to get it from windows update.
Its a dell pc (forgot the model but its newer has a core i7 860 in it). Has windows 7 ultimate 32bit on it.