WHEN I SHUTDON MY COMPUTER, IGET THE MESSAGE "INSTALLING UPDATE 1 OF 1. IT GOES THRU THE NORMAL SHUTDOWN. EACH TIME I USE MY COMPUTER THE SAME THING HAPPENS. I HAVE TRIED VERIOUS WAYS BUT HAVE NOT BE SUCESSFUL IN RESOLVING THIS PROBLEM
View 3 RepliesI have windows 7 x64, I go to updates and it tells there is an important update I installed it and it was succesful I rebooted the computer and it just shows it again, I go to update history it says it was successful but it still says there is an important update I downloaded a fix it thing I don't know the name it was a microsoft fix it thing but it still says it needs to update it?
View 5 Replies View RelatedIs there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 Replies View RelatedI installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
I have a problem with my windows updates. For some reason the windows update center is not working and my last update was on 16/9. I get a message to restart but nothing happens.I've already tried sfc/scannow, fix it, windows troubleshooting, fixit50123 and Fixit 50202 but the problem still remains. Somebody told me that cleanup registry that tune up maintenance is using propably causes the problem but don't know how to reverse the clean up
View 1 Replies View Relatedon windows 7 ultimate 64 bit windows update says the service is not running and try restarting computer but that makes no difference
View 1 Replies View RelatedI have a Toshiba laptop with 64 bit Windows 7 Home Premium installed.
Although it has updated in the past, I am now not able to start the Windows Update Service. There is no malware on the system and I have tried several methods found on the internet such as resetting the service. I have also been unable to install MATS RunWindowsUpdate.
Opened up Windows Update today and find out it is not working because the service is not running. When I look in services.msc, Windows Update is missing.Running Windows 7 x64. I don't think it is a malware infection.Running ESET Nod32 Antivirus 4, Comodo Firewall and Malwarebyte's Pro. I did a scan with Hitman Pro and it didn't find anything. Tried sfc /scannow, no problems found.I can't find my Windows 7 install cd, we remodeled and moved back in recently.
View 6 Replies View RelatedWhenever I try to run Windows Update it comes up with a dialogue box that says "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." I believe my computer is Windows 7 Home Premium 32bit. I've tried a lot of the fixes that have been posted, but none of them worked. I tried running an SFC (I think that's what it was called, sorry I'm not very computer smart), rebooting my computer, and doing a system restoreAlso, Windows Update doesn't show in services.msc. I saw one post that said something to do with Windows Security Center can make Windows Update do this, but my Windows Security Center doesn't work either. Whenever I try to turn it on, it says "The Windows Security Center service can't be started." Windows Security Center is also not in services.msc for me. I know that Windows Update worked 2 months ago, but that was the last time I tried using it
View 1 Replies View RelatedI just got Windows 7 Enterprise N about a week ago. It is for my computer networking class, our teacher also gave us a bit more other software and I am trying to find out what I am doing wrong. I have installed and ran the precursor software from microsoft.com to make sure that my computer is able to use SP1 and I don't have any problems in my registry. It is an official, licensed version and registered, and all the other updates work. I have manually downloaded and tried to install it and still nothing. Where do I start on troubleshooting this?
View 8 Replies View RelatedAfter I reinstalled it, and went on to update the W7 SP1 a strange noise came out of my machine just as it began installing it, and then it seemed like my hard drive crashed, so the PC became unresponsive and I had to shut it down by holding in the button (it tried to recover files when I started it up again, hence my hard drive problem theory).I've since reformatted my machine five times and the exact same thing happens, everything, including hard drive works perfectly until I get to installing Service Pack 1.
View 8 Replies View RelatedOk, so i have just built my pc and have been finding it impossible to update to service pack 1. The reason given is: Code 80070057 Windows Update encountered an unknown error. I have researched this type of topic for about 2 days now and haven't found any good solution so i'm trying to post myself now. I have run an sfc scan and this is my test results:Here is some more info about my PC.
View 7 Replies View RelatedI'm having trouble updating to service pack 1 in Win 7 x64 Home Pre by Dell OEM.
There is another post that the problem can be solved using the log file so I have tried using the Readiness Tool and the log is as followed:
[Code]...
I'm encountering an extremely strange issue on my desktop. I keep getting SSL errors when ever I try to go to google.com, gmail.com or dozens of other sites on google chrome. The exact error is "The site's security certificate is signed using a weak signature algorithm". I can't reach the site at all.Windows Update service is also not running and doesn't even show up in "services.msc". I get this error "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer". Obviously restarting doesn't help. I also got a similar error for Microsoft Security Essentials, and it wouldn't run at all so I uninstalled it.MSI Afterburner also gives me an error when I start it up about how I need to restart to properly detect my hard ware, but I didn't do that before and I tried restarting with that as well.I've run many, many, scans to detect trojans, viruses, and spyware using AVG Free, Spybot Search and Destroy, Malware Bytes, Spyware Doctor, Kapernsky's Rootkit tool. AVG, and Malware Bytes both turned up and deleted some basic malware & spyware. The others can't detect anything.
View 18 Replies View RelatedTried to install Service Pack 1 on my machine today and I find it gets stuck as it installs once I've shut it down. I did have to hide one of the updates about a month ago which did the same thing, so I'm assuming it's been put in SP1 and is what's causing it to get stuck. Just tried to view the hidden updates to tell you which one it was, and to ask how to stop it from installing in SP1, but it seems to have disappeared from there, which might be because of SP.Can I find this missing hidden update? Is there a way that I can remove this one update from SP1?
View 2 Replies View RelatedI am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies View RelatedI can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"Upravljački program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
View 4 Replies View RelatedI am running Windows 7 (32-bit) SP1. IE9 for my browser and my problem is everytime open a new session in the browser I am asked at some point to install Adobe Flash Player all over again. It will install successfully everytime, however, it is very annoying that I must re-install this software every-single time. Additionally, I see that in my 'Services' Adobe Flash Player Update Service is STOPPED and It will not START regardless. Manual, Automatic, Delayed.does not matter the Service will not START.
View 1 Replies View RelatedService pack one refuses to install. My computers specifications are available in my profile. I had service pack one installed fine before but I was forced to do a clean install and now it won't install, I've also tried the standalone installer for the service pack. Auto update just doesn't download and standalone installer stops about halfway, around the area where it should ask to restart. Internet explorer 9 won't install either plus any other update from windows update.I'm using Comodo internet security but before I was using MSE and the problem still occurred then.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: ATI Radeon HD 5570, 1024 Mb
Hard Drives: C: Total - 453862 MB, Free - 243497 MB; D: Total - 99 MB, Free - 61 MB; F: Total - 499898 MB, Free - 469472 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-D3, ,
Antivirus: COMODO Antivirus, Updated and Enabled
I have been receiving and installing updates to my Windows 7 computer for about a year now. So far there have been no problems. About mid year of 2011 I installed SQL Server 2005 Express. Not certain the problem I am having began then or later, like about November 2011.The problem is that Visual Studio 2005 Service Pack 1 update will not install (file size 431.7MB), any ideas why? Does not appear to effect anything else as my computer appears to be running fine.
View 1 Replies View RelatedToday windows downloaded and installed SP1 automatically. After that, the power went off, when it came back and I booted the PC it started updating as it would usually do, it finished updating then rebooted and started updating again, this happened around three times (no failure, just installs over and over again). I became tired so I shut it down and it displayed "Failure configuring Service pack. Reverting changes", after that it rebooted again but began installing the SP once more, I rebooted again in safe mode and it began reverting changes once more only to reboot again and attempt to update once more.Right now it's reverting changes once more and I'm just sitting here waiting and I don't know what to do (also, it's been reverting for quite a long time, around 30 minutes)
View 5 Replies View RelatedI have a Sony Vaio laptop, maybe 2-2.5 years old. I let it install the updates earlier this afternoon and it needed to restart to finalize everything. I did not have it plugged up but thought there was plenty of battery life so I let it restart and went to do a couple things around the house. I was only gone 10-15 minutes but when I got back it was dead.
So I plugged it up and tried to power it back up. The VAIO screen comes up and then it goes straight to a black screen with a little blinking dash mark in the top left corner. The dash moves down 2 or 3 lines and then just sits there and blinks. I cannot get the computer to do anything else.
Issues with installation of a recently released update from Microsoft
Security Update for SQL Server 2005 Service Pack 3 (KB970892) error code 6D9E fails to finish and install.... have went to microsoft and attempted to download the files, however installation fails during this process as well.... any suggestions?
Current OS Windows 7 Ultimate Build 7600
Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-based Systems (KB973688). I've continuously receive an error stating this update failed. I've been trying to figure what could be the cause. I just purchased a new laptop (Acer - Aspire) that was preloaded with Windows 7. All other updates have been successful. Any advice would be greatly appreciated. Also, has anyone had any trouble with installing MS 2007 software on Windows 7; do you forsee my current issue hindering future MS 2007 install? I'm currently using MS 2003.
View 3 Replies View RelatedThis happened to me on my last build and last night I reinstalled my computer and the issue stopped. Now, after installing Service Pack 1 (it seems), it continues to stop at the welcome screen and forces me to click my user to continue logging in (No Password). Is this handled by a setting or is it an actual issue? I'm running Windows 7 Ultimate 64 Bit.
View 2 Replies View RelatedMy computer went through some problems and I will be getting a new hard drive. Once I get the new HDD I will have to reinstall Vista, which will only have up to service pack 1 included. Do I need to then upgrade to Vista Service Pack 2 before installing my Windows 7 Professional Upgrade, or will it still work on top of service pack 1?
View 1 Replies View RelatedWindows keeps installing the same update:x64-based systems (KB2647753)
View 6 Replies View RelatedWhen I try to download the updates they don't even start downloading. Windows gives me two error codes: 80070017 and 800B0100.I have already tried a microsoft update standalone package but that only seems to have installed one item.
View 17 Replies View Relatedi get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies View RelatedI reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
View 6 Replies View RelatedWindows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 Replies View Related