When I try to download the updates they don't even start downloading. Windows gives me two error codes: 80070017 and 800B0100.I have already tried a microsoft update standalone package but that only seems to have installed one item.
View 17 RepliesWindows keeps installing the same update:x64-based systems (KB2647753)
View 6 Replies View RelatedWindows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 Replies View Relatedmy laptop has 8gb of ram and intel i7 quad 2630m. i had mozilla firefox + google chrome opened with 3-6 tabs while playing Internet video but when i was installing this 1 windows update my laptop lagged until it the update was nearly completed.i don't think i should be lagging but my question is when installing windows update is it normal to lag and does it use the cpu or hard drive?
View 5 Replies View RelatedI was wondering is it safe or risk free to browse online with IE9 while I started installing windows update manually rather than through auto updates.
View 2 Replies View RelatedI have windows 7 x64, I go to updates and it tells there is an important update I installed it and it was succesful I rebooted the computer and it just shows it again, I go to update history it says it was successful but it still says there is an important update I downloaded a fix it thing I don't know the name it was a microsoft fix it thing but it still says it needs to update it?
View 5 Replies View RelatedCan I use then internet while downloading and installing with windows update?
View 3 Replies View RelatedWHEN I SHUTDON MY COMPUTER, IGET THE MESSAGE "INSTALLING UPDATE 1 OF 1. IT GOES THRU THE NORMAL SHUTDOWN. EACH TIME I USE MY COMPUTER THE SAME THING HAPPENS. I HAVE TRIED VERIOUS WAYS BUT HAVE NOT BE SUCESSFUL IN RESOLVING THIS PROBLEM
View 3 Replies View RelatedFYI: On last shut down of system on 9-24-2012(win7 ultimate) windows update installed KB2538243. When starting system back up several hours later, window's would not start. Started in safe mode, used system restore, all ok for now! Checked recent updates and found that the above update "failed to install" and was the only update listed.
View 3 Replies View RelatedJust recently, i read up that doing a hard shutdown is bad. Now, after installing an update, my other computer is frozen, except the mouse. I've tried CTRL+ALT+Delete, that wont do anything. I can't click anything
View 5 Replies View RelatedIs there a link showing all the win7 update patches and which ones in the list are to be avoided?
View 2 Replies View RelatedMy machine has been stuck on installing this update all night. I think my hard drive may be full, what should I do? Been meaning to format that thing and reinstall windows to it since its just a 40 gig SSD.
View 3 Replies View RelatedEvery time I shut down, Windows Update installs the same 2 updates. It never gives an error message saying that the install failed. It just insists on doing it again. This is the update from last week, I guess. I'm afraid I'm at work and away from the affected computer. It's not critical, it's just annoying, bc shutdown now takes too long.
View 8 Replies View RelatedThis has to do with a windows update that wouldn't install and keeps giving me an error code(800FO203). The update is for Realtek PCIe GBE Family Controller. No matter what I do it wouldn't install. (Disabled firewall, antivirus, contacted Realtek).
View 10 Replies View RelatedIs there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 Replies View RelatedI have seen this problem on other forums. None had a satisfactory answer (besides the usual reinstall).Windows now fails to boot, after Win update automatically installed the update and insisting I restart. The update was Definition Update for Microsoft Security Essentials - KB2310138 (Definition 1.97.1113.0). Startup repair finds no problems. The BIOS recognizes the system drive and reports no errors.
I had done (before the update installed itself): repaired the "windows can't find the DVD drive" problem using the Microsoft "Fixit" for that problem it was successful). Also the external storage drive on a USB 3.0 controlled was dropped by the system at some point (hence my anxiety; all my backups, including a rather stale system drive image, are on that drive). I can access the Win 7 system drive with another OS on the machine (XP SP3).
[code]...
I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
My laptop is installing updates before it let's me log on. But the screen where it says "Please do not power off or unplug you machine. Installing update 7 of 9" WILL NOT go away.
View 1 Replies View RelatedKB2655992. Windows has been stuck on that for a few hours now.
System:
Windows 7 ultimate 64 bit
8150fx cpu
Crosshair V formula z motherboard
SSD-Agility 3
16gb 1866 mhz memory (4x4)
HD6990 GPU
1300w PSU.
None: Clean installation. All motherboard features have not been installed yet. Only the basic drivers for the Motherboard.
I currently have an ASUS K53E that I've put a 60GB SSD into. I recently had to send out the laptop for service with ASUS, but I swapped the SSD for the original drive at that time (to save the chance they may re-format the drive).In any case, their repair apparently included a BIOS update... When I got the computer back, I naturally swapped the SSD back into the computer. Since then I've had numerous issues, the most prominent being that WLE stopped working (Every time I load Messenger it inexplicably stops working), and when I attempt to un-install it it will have a problem and abort the removal.With skype, I installed it fine, but it will launch, have a problem, then close! This is extremely frustrating..So really, my first thought is that there is a BIOS-update related issue, because the BIOS was flashed with the other drive in the laptop, and the installation on the SSD was installed/configured before the BIOS flash.Am I looking at a clean install of windows? Or could I get away with just a repair? I'd really prefer not to reinstall if I don't have to (Getting the OEM install on the SSD was hard enough in the first place).
View 9 Replies View RelatedI reinstalled Windows 7 on my computer a week ago when I bought an SSD, and then 8 came out, and I got it for super cheap so I decided to try it out. Well, I'm back to 7. ANYWAY, my issue is that virtually all of my updates are failing. I saw this problem before I "upgraded" to 8, and now I'm seeing it again. My computer stays on the "updating" screen for a while, and then says the updates fails, and reverts to the last known function version of Windows. So my computer is useable, but I would like to have my updates so I don't have to wait 5 minutes for Windows to scratch its butt and get on with life.My error code is 800705B4.I wanted to show a picture of exactly what I'm seeing in my update history, but don't really want to take the time to sign up for a picture hosting website. If you absolutely need it, I will. Basically, I have an update history with a long list of:"Update for Windows 7 for x64-based Systems
View 5 Replies View RelatedI got notification 1/9 that 14 updates are available for Windows 7 Pro, 64-bit. All installed but 1. Update KB2773072 generates error code 80073712. I have re-tired multiple times each after a system reboot. The update is RECOMMENDED not critical. I can probably go without it. It appears it is related to gaming applications. I don't game. getting the update installed?
View 6 Replies View RelatedYesterday i installed the windows update from Windows and slept. On the next day morinig i was not able to boot the system.
View 1 Replies View RelatedI've recently had ubuntu 10.04 installed on my laptop and I wanted to switch back to Windows 7. I have a copy of my windows 7 on my hard drive which I've used to reinstall windows 7 multiple times. For some odd reason when I try now every time I go through the process it freezes at "Installing Updates" and goes no farther. It doesn't have a percentage next to it or anything. I've deleted all the partitions, formatted it multiple times and still the same problem.
View 3 Replies View RelatedI'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedThe update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
How to View Windows Update History Details in Windows 7 ?
View 0 Replies View RelatedHow do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies View RelatedHow to Uninstall a Windows Update in Windows 7 ?
View 0 Replies View RelatedMy windows update does not like to load! It takes a very long time and sometimes causes explorer to crash! When I checked, I had 92 updates to install. When I click download and install, it would freeze and stay there for a long time. I tried to use the Fix it application, however that gets stuck on "Checking Online for Updates" as well! What should I do? I also tried to update in safe mode, but it wouldn't let me.
View 4 Replies View Related