This has to do with a windows update that wouldn't install and keeps giving me an error code(800FO203). The update is for Realtek PCIe GBE Family Controller. No matter what I do it wouldn't install. (Disabled firewall, antivirus, contacted Realtek).
View 10 Replies
I got notification 1/9 that 14 updates are available for Windows 7 Pro, 64-bit. All installed but 1. Update KB2773072 generates error code 80073712. I have re-tired multiple times each after a system reboot. The update is RECOMMENDED not critical. I can probably go without it. It appears it is related to gaming applications. I don't game. getting the update installed?
View 6 Replies View RelatedA while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
I am running windows 7 OS. Updates are available, however when I try to update all updates install except one for Security. Net framework and I get an error 643. It suggested installing windows update readiness installer, which I did, but I get the same error.
View 2 Replies View RelatedError code 643 for windows update
View 1 Replies View RelatedThis has been going on for a couple of weeks. Every time I shut down my laptop, it TRIES to Update. I finally realized that something is wrong. I went into the Update folder in Control Panel and looked at the "update history" to find that every time I shut down, the update attempts have "failed".The error code is 66A. I tried the "Windows Fix-It" and it didn't work. I don't know what to try next. The three update items are for NET.Framework 4.
View 6 Replies View RelatedI am trying to install the "Update for Windows 7 for x64-based Systems KB2718704)," however, whenever I try to install it, I get the 800B0100 Error Code. I have tried using Windows Update to do it automatically, and I have also tried to manually install it by downloading it from the Microsoft website; neither method has workedAlso, this the TSG SysInfo log:Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz, Intel64 Family 6 Model 42Stepping 7Processor Count: 4RAM: 6056 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 939685 MB, Free - 620803 MB; F: Total - 476937 MB, Free - 263103 MB;Motherboard: Dell Inc., 0GDG8YAntivirus: AVG Internet Security 2011, Updated and Enabled
View 13 Replies View RelatedI am using Windows 7 Home Premium on a 64 bit operating system. I haven't used this computer in over a year, but my brother has been using it since, but hasn't kept it updated at all or with any anti-virus. I was able to install everything on Windows Update except Security Update for Windows 7 for x64-based Systems (KB2621440). I've tried everything from simply restarting, rebooting in safe mode and safe mode with networking (I could not open windows update either of those ways), and doing a safe mode with networking full scan with Malewarebytes Anti-Malware, Super Anti Spyware, and Microsoft Security Essentials. I did find 2 trojans and removed them and rebooted, but was unable to install this security pack still. When I tried installing the individual version of the security pack online, it told me the update did not apply to this system. I also tried running the windows update repair tool. I made a separate administrator account and downgraded my own account to a standard user, but I'm unable to demote my brother's administrator account. His is not password protected, but there is no option to change the account type, even when I'm logged on as him or under the other administrator account I just made.
View 3 Replies View RelatedMy grandmother called me today after she tried installing some updates from microsoft, she told me that she got the error code 80070003?
HP pavillion dv-4 1555dx windows 7 home premium 64-BIT 4GB ram intel mobile graphics card 320 or 250 GB hdd
I was trying to install Windows 7 Service Pack 1 (KB976932) on Windows Update and I got error code 80070490.
View 6 Replies View RelatedI'm running Windows 7 64 bit on a dell laptop ( which is wireless) About 95% of my automatic updates fail with the code "800B0100" tried the "fix it" from MS, no luckI try to download the "system rediness update tool" from MS but keep getting a page not found prompt. I turned off the windows and McAfee wirewall, but that didn't help either. I'm using a Netgear N600 router. Maybe it has a firewall. It's just a Windows problem though, all other updates ( McAfee, Adobe, etc.) work ok.
View 9 Replies View RelatedNo updates on this computer..[i know that all updates were installed] updates won't install..tried a bunch of repair suggestions, but no work, maintenance : back-up, check for updates & troubleshooting system maintenance 'status not available'. I tried to run sfc/scannow but said 'could not start repair service'. Somewhere I ran into error code '80080005'. Windows 7 ultimate x64. This all started when a friend opened her mail on my computer..
View 9 Replies View RelatedI got windows update error with error code 80080005. I tried NETSH WINSOCK RESET as Noel said in the other post, I changed the window update setting, I deleted all the files in C:WindowsSoftwareDistribution as someone has suggested, and uninstalled Malawarebytes (antispyware) and Norton (antivirus) softwares....ran fix it from microsoft which says error fixed...still the same error message from the windows update. I did, however, got the latest windows defender update installed. As of now my windows update main page shows the following: Most recent check for updates: Never Updates were installed: Never
and error message: Windows could not search for new updates, an error occurred while checking for new updates for your computer with the error code 80080005.
When checking for windows updates I get a notice that windows update must be updated. It tries to load update agent 7.6.7600.256 which fails and retries fails also. I can download some Win updates and apply manually and they did work. I tried running the Microsoft Fix It program and it didn't help. I ran the System Update Readiness Tool and it didn't help I am getting the same error 8007371B.
View 2 Replies View RelatedWindows Update error code: 800b0100
View 5 Replies View RelatedI have been trying to update these 4 updates for office 2003.Security Update for Microsoft Office 2003 (KB2509503). Security Update for Microsoft Office Excel 2003 (KB2502786).Security Update for Microsoft Office PowerPoint 2003 (KB2464588). Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2522981)
Whenever I try to install any of the updates it goes through the whole process until the very end, and gives me the error code of 80070643. Does anyone have a solution for this problem, I have been searching on and off for the past couple weeks and cant find anything.
I'm working on a Brand New Dell Inspiron 1525 with W7 OS. I was in the middle of catching it up on all the updates and they went in fine except it when it got to Service Pack 1, It will not install SP1. I receive the error code: 800B0100 I also went thru the steps of "Get help with this error" and it went thru "Windows Update troubleshooter" said the problem was "fixed", however still failed the next 4 tries, any suggestions? THX!!!
View 4 Replies View RelatedI have two machines, desktop and laptop, both running Windows 7 Build 7600 (64-bit and 32-bit respectively) that just started getting the "Code 80070005" message when running Windows Update. I have seen many others with this issue (apparently it used to be an issue with Vista) but it's surfacing again on Windows 7. I have tried any of the proposed fixes, Rebuilding the "C:/Windows/SoftwareDistribution"Running the SubInACL tool to repair file and registry permissionsDisabling the firewall (Windows Firewall) and anti-virus (Avast Home) without any effect.Does anyone have a reliable fix yet? I'd rather not reformat both machines just because there's an incorrect setting somewhere.
View 9 Replies View RelatedI have attempted to update windows 7 with the :Security update for windows 7 for X64 systems (KB2619339) with only failed results.the error code is : 8007065E I have CBS logs WINDOWS resource protection found corrupt files but was unable to fix some of them.
View 2 Replies View Relatedabout a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
I have Windows 7 Pro 64bit set to automatically update the OS. Three days ago I lost connectivity on my shared home network that uses a Netgear WN2000RPTv2 wireless extender to connect to my Ruku which had worked perfectly to stream movies. (Amazon Prime). When I began to check out the systems for possible errors, I noticed that there had been updates for Netgear, several optional and one recommended. All failed with the error code of 80070103. I've tried unplugging my routers, did a hard restart to factory defaults, etc., all resulting in no change to the systems. The desktop pc connected to it is as follows:
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD FX(tm)-8150 Eight-Core Processor, AMD64 Family 21 Model 1 Stepping 2
Processor Count: 8
RAM: 10079 Mb
Graphics Card: AMD Radeon HD 7570, -2048 Mb
Hard Drives: C: Total - 932364 MB, Free - 856809 MB; D: Total - 21079 MB, Free - 2654 MB;
Motherboard: Gigabyte, 2AC8
Antivirus: Microsoft Security Essentials, Updated and Enabled
I somehow managed to destroy windows update. it cannot find updates anymore. Ive gotten 2 error codes: 80248014 and (not sure) 80073712. I have tried using a program i found on the windows club that was supposed to fix it but didnt, i tried the System Update Readiness Tool, but it failed.
View 9 Replies View RelatedI'm getting the above mentioned error with just this one Windows update. I have done a search for a fix and have followed a couple instructions, but no luck.
View 5 Replies View RelatedI did download the iso that i got from Microsoft Moderator and it was Home premium 64 bit, did burn whith 2x whith imgburn and verify succefully then i did put it inside my pc and got that error on expanding fils 0%. Im using a Hp pavillion p6310sc . I had when i bought computer Home premium 64 bit but i tryed my friends 32 bit ultimate before but now i tried that too and gets same error. I got this issues while my computer did frezze and waited like 30 minutes then restarted pc and got something windows cannot boot so i did do the repair automatically for 12 hours and did not happend anything so did turn off pc, I tryed system recovery was on 0% for about 12 hours but when we did install 32 bit utlimate we did by mistake format the recovery harddisk so i dont have it on the hdd anymore. I have even formated the hdd whith diskpart clean all so its nothing on it but stills error and no install. Im writing this on a ipad and have not have my pc for 4 weeks so i pray and hope we can fix this pc because right now i have only economy for a hdd ans maybe cd rom but not a new computer. I have gotten a new error now when removing 2 gb of ram. Error code: 0x800703EE
View 1 Replies View RelatedWindows cannot install required files. Makesure all fiels required for installation are available and restart the machine
View 1 Replies View RelatedI have a lop top with Windows 7 64 bit OS. Of lately, Windows update keeps failing to install some software updates. Here are the details of the s/w that would not install[CODE]
View 2 Replies View RelatedBeen trying since 9/21 to install these two updates. I have tried the solutions suggested at Microsoft Community to no avail. I was able to install a Win Defender update today, but not these two
View 6 Replies View RelatedI have a Gateway laptop M series that I upgraded to Windows 7 a few years back (o.g. Vista) has run beautifully ever sense. Recently installed Win8 fresh. Error code OxcOOOOOe9 became the issue. Start up repair was performed several times with no resolve. Used cmd to perform MBR fixes including fix mbr, bootrec.exc, and other fixes found on this site. Nothing seems to resolve the issue. I gave up and was about to call it quits, under the assumption the hdd was gone. One day I decided to throw a fresh copy of Ubuntu on it for laughs ( I am currently getting my certs in networking and linux+) it works flawlessly. Strange to me although I understand there is a difference with grub and mbr.
I should add that I am now just trying to reinstall 7. I have played with 8 on a different PC and would rather stick with the former.
now my pc in windows7 and i want to install windows server 2008 but installing time to showing this computer does not have enough space for temprory files windows installation need at least 464 mb space on any partition for temrory files code:0x80070103
View 8 Replies View RelatedI am trying to download/update the 'windows 7 service pack 1 for X64 -based Systems (KB976932) and I can't download it. What do i do?
View 1 Replies View RelatedJust inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
