Windows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 RepliesEvery time I shut down, Windows Update installs the same 2 updates. It never gives an error message saying that the install failed. It just insists on doing it again. This is the update from last week, I guess. I'm afraid I'm at work and away from the affected computer. It's not critical, it's just annoying, bc shutdown now takes too long.
View 8 Replies View RelatedHow do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies View RelatedI did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies View RelatedI have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
View 4 Replies View RelatedIt appears to be solved, however Windows Update does not work. I get the message "Windows Update cannot currently check for updates because the service is not running. You may need to restart your computer." Needless to say, the restarts do not help. I also tried installing Windows Essentials for virus protection which could not receive updates. I have since uninstalled an am using Clamwin for virus protection.
View 7 Replies View RelatedI've installed the updates upon request. It's been two days now and the pop up keeps on coming saying the same two updates available. I checked the update history and the updates were all installed successfully. These updates are actually a few years old and it's odd how they just popped up. The updates were for MS Framerwork KB2600217 and KB2656351
View 1 Replies View RelatedI'm having a problem with Windows Update. It's managed to install a few updates, bust most of the updates that it automatically finds fail to install (many important ones too - security updates, etc.). A bit frustrating. For the past couple of days, it tries to install the same two updates every time I turn off the computer. The process takes about 40 minutes. Then it shuts off without an error message. Afterwards, when I turn the computer on again, it doesn't say anything but there are once more two updates that need to be installed - the same ones. It's been quite frustrating. For now, I've got the updates turned off, so it won't try to install them any more, but that's only a workaround and no solution.
I think the problem might be connected with some other installations problems. I've tried to download the updates and install them manually, but it didn't work either; first it said that my virus scanner was interfering (I disconnected from the Internet, deactivated the virus scanner, and tried it again, which got a little bit further but not all the way). At the end I got a kind of dubious error message, which I sadly haven't written down, but it was similar to the ones that I got when I tried to install Microsoft Office and also was unable to get the installation to run through to the end. In both instances, the installation was almost done, after which I got a message that there was a problem with some assembly components, and then it undid the changes. This normally took more than an hour - 30 minutes for the installation to get to the point where it started over, an hour to get it to cancel itself. Haven't found a solution there, and that sucks, because I really need it. I've got a lot of files saved in OneNote format that I can't use and need for work.
The Office error messages led me to a couple of forums where it had worked out because people had updated their .NET framework. I can't do that because .NET is part of the OS framework in Windows 7, apparently. Then I read that some other people had just used Windows Update to update their OS, and then it worked. That's what led me to the discovery that my updates weren't working. I believe that that's got something to do with the problem.I've installed some software, but there's the problem with Windows - I can't install it at all. Not sure what to do here. Windows Update lets me look at the update history. I've found that I get the error code 643 for the two updates that have repeated over the past two days again and again. For the other ones it's a little different; they tried to install once and didn't work. For those, I get following code: 80080005.
I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies View Relatedseveral of the Windows 7 machines on our domain here at work are reporting that windows could not search for new updates. We have just recently had a new server installed SBS2011 and then shorty after is when this issue sprang up. The windows xp machines are able to update fine.
View 9 Replies View RelatedDoes the Windows Update in 7 do an adequate job at updating drivers or is there really a practical use of any of the driver update software
View 4 Replies View Relatedfor a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).For some reason, it has decided not to recognize the drivers on my laptop.I have tried to uninstall and reinstall (no go).I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason no access yes I am Administrator).Reinstall again still no go.The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful still no printer. Now, it is unsuccessful again.I don't use the Fax component.The reinstall from the CD is successful, but when I plug in the printer, it fails."Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. [code] Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing.It never did this before when I was happily printing away from both computers.
I have no problem printing from the XP machine when it's plugged in there all is good there.I have been to the Canon website and downloaded the latest drivers, which installed perfectly, but again when I plug in the printer, it fails to install the fax driver and the printer won't work..I have also tried all of the various USB ports and ruled that out.I've also run the Hardware and Devices Troubleshooter also without success.Also, I don't know if this is relevant or not, but I can't even print to PDF. My CutePDF program is also not working. I thought this may have been a workaround until I got the printer working again, but no luck.CutePDF will go thought its processes (it's now ticked as default as my Canon is now longer even listed), up till the point where you need to name the file you're creating (that box doesn't appear) all you get to do is print, choose CutePDF, then it disappears no file or if there is, I have no idea where it's gone or what it's called can't find a trace of it.I have not downloaded or installed any other programs (except Windows Updates) in some time that could have caused this. I am at a loss. This is a business computer and printer and is causing much angst.I am running Windows7 (64bit) on an Acer Aspire Laptop (only 16 months old) Firefox 13.0.1.Also running Microsoft Fixit for Printers doesn't even detect the printer and tells me to install one it already is As does the Troubleshooter Does not detect the printer.
since i got my computer i try to windows update i get this error, windows update cannot currently check for updates cause the service isnt running try to reboot, ive done that and it didnt work and sometimes when i got into the update thing it freezes and not resopds.
View 9 Replies View RelatedWindows notifies me that there are updates available. When I select to install the updates it takes a long time and I get a message stating that windows has detected that my computer is running on battery power and to plug my computer into an outlet.I get this message even when my computer is plugged into an AC outlet at the beginnig of the update dowload attept.What could be the problem? I had to have Windows 7 reinstalled on my computer by someone at a local charitable company but I've noticed little weird things that didn't happen when I had my original version.Internet sessions closing suddenly and cursor skipping around the page eventhough I updated my touchpad drivers.
View 1 Replies View RelatedI keep setting Windows to 'Check for updates but let me choose ...' but it keeps changing back to 'Install updates automatically'. Usually I notice this as the updates install or I see the messages that the updates were installed.
View 2 Replies View RelatedI recently formatted my Dell Inspiron Duo netbook, with Windows 7 Home Premium 32bit. I installed all of the software which I run on it without any problems.When I try to update Microsoft Office 2010 Professional Plus (32bit) Windows Update only finds a few updates, and after they're installed it doesn't find anymore updates. It doesn't even find Office 2010 SP1.{Note: I had no problems with other updates like Microsoft Visual Studio 2010 or other Microsoft updates.I tried uninstalling Office 2010 and installing it again but nothing changed. The privacy settings which show up the first time you run an Office application I set it as "Recommended settings".I also tried downloading Office 2010 SP1 (32bit) and when I tried to run it an error came up saying something like version mismatch (I presume that you need to install other updates before running the setup & I also tried to download an other update but the same error came up.)
View 3 Replies View RelatedOk over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit
So I checked to see if they failed and they were installed successfully!
I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.
I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.
I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!
edit (Ian): This thread has been split from an audio drivers topic, as it may be of use to others having C004F012 errors.
When I went to install the x64 drivers, I got a message saying that my Operating System was not compatible, but then it asked me if I wanted to run it under the correct settings, which I did and then it installed. As for the Windows Updates, I tryed to run them and I get "Windows could not search for new updates" and error code C004F012.
I'm rebuilding my desktop PC with a fresh installation of Windows 7 x64.Upon first boot after installation, 3 updates automatically installed. After a reboot, I was informed that over 100 additional recommended updates (and quite a few optional updates) were ready to be installed.I chose to install all of the recommended and optional updates (except for the 39 international updates).During the Windows Update installation process, a Microsoft Mouse and Keyboard Center installation window appeared. When the progress bar got to about 75%, however, the following error dialog appeared underneath: Microsoft Visual C++ Runtime LibraryThis application has requested the Runtime to terminate in an unusual way Presumably, the installation of the Microsoft Mouse and Keyboard Center (and perhaps other items) failed to install; upon pressing the OK button, I was informed that 51 updates succeeded and 75 failed. Codes 800706BE 800706BA were mentioned.Upon reboot, another batch of updates (75?) installed; then the PC rebooted twice.At this point, Windows 7 appears to be completely installed and up to date. There are no new items in Windows Updates. However, the Microsoft Mouse and Keyboard Center is nowhere to be found; I was able to download the installer and successfully install the product.
View 5 Replies View RelatedI have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.
I have received the BSOD:
after trying to reformat my F: drive.
Uninstalling my Nividia drivers for a new one
After using Firefox for a while it just won't open and BSOD follows shortly after
I believe after installing Windows Live applications it startes to give me BSOD
After the first BSOD I start to get the error message:
Check filesums or somehting about the computed sums is not correct.
Last night I received a message that Windows needed to download updates. There were seven of them, so I clicked on install. After downloading it said it had to restart to complete the installation. I then got the screen saying "Configuring Windows. Do Not Turn Off Your Computer." The little circle kept spinning for about a half hour. I saw that the HD light didn't come on at all, so I assumed it had locked up. I had to press and hold the power button to get it to reboot, and after telling me Windows did not shut down normally, it started up and appeared to complete the update installation.I checked the Update History and most of the updates said "Successful" but a few said "Pending". I have had this lockup happen before, but usually it installs with no problem. What can I do? What does Pending mean? I have Win 7 - 64 bt - Service Pack 1.
View 5 Replies View RelatedI have a dual hard drive system. When I attempt install windows 7 from the disk, I can do it and then install some programs, but windows ask to install important updates. Once it does this it always crashes and I can't boot into windows anymore. The repair windows 7 install does NOT work. Neither does the restore to a previous time work. Does this indicate that the hard disk is defective? I have used the western digital tool and it tested fine.
View 5 Replies View RelatedI'm running Windows XP 7 on a HP EliteBook 8440p laptopI installed three updates, including the latest Windows 7 Service Pack and now my computer will not start up again. The Startup Repair tool is detecting no errors. The system restore tool warns me that my diagnostic power is low and a restore can not be reversed. I ran a chk dsk and no errors were found and fixed there either.
View 8 Replies View RelatedSo first I get this message when I mouse over the speaker icon(notice the red "x" on the icon).When I click the icon, Windows does a diagnostic and then this shows up.This is whats listed in my playback devices and this is with "Show disabled devices" enabled. Everything is enabled,Here is a picture of what my device manager looks like.
I've tried installing drivers for my sound card and my chipset, I tried restarting my computer, updated from my device manager, uninstalled drivers, reinstalled, etc. I've been searching online for a bit and nothing I found worked so I figured I'd give this a shot. I tried uninstalling the service pack update but that didn't work.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 3198 Mb
Graphics Card: NVIDIA GeForce GTX 460, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 300816 MB;
Motherboard: Gateway, G33M05G1
Every time I turn on my pc I do have a message Do not turn of your computer Windows installing updates after a while I do have second message 0% Update completed after a while the third message appear Windows Update Failed, Reverting Files, do not turn off your computer after that I see the Welcome message then Windows starts normally. I do have Windows 7 Pro 64 bit, that happens every time I switch on my pc, my updates are:Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175) [code]
View 2 Replies View RelatedI have Windows Vista Home Premium 64-bit OEM (with free Windows 7 upgrade). I want to reformat the computer. After installing Vista, do I need to download Vista updates, before installing Windows 7? Or just immediately install Windows 7 after Vista? Also, how often do you do a fresh install (reformat)?
View 2 Replies View RelatedAlright, so after updating my pc a few days ago and managing to install SP1 for windows 7, my computer now constantly "downloads" information which results up to 100's of mb's per hour wasted.. and thus having a limited cap amount, I need to find a way to stop it. Why I say this now, is because ever since I updated windows 7, so the "downloading" has started and it never used to do this before.I have told windows to not start up apps like iTunes and Skype etc. But this hasnt had a effect. Is there anything else I can do to stop this?
View 4 Replies View RelatedWhen i plug in a new usb device, windows is supposed to look for updates to install the device right ? well in my case, it doesn't and i'm not able to access the pen-drive. On the other hand, if i try toplug in an old and previously used pen drive, it works perfectly.
View 1 Replies View RelatedI'll be ecstatic if this could be solved. After installing windows updates my pc no longer boots. It turns on with some beeping noises and then is just stuck on a black screen where I can move the mouse cursor around to my hearts content but cannnot do anything else as it doesn't boot any further. I am not sure if I still have the windows disc as I upgraded from vista many a moon ago but it maybe here somewhere.It doesn't give me the option to run in safe mode, do any sort of system repair or go to the BIOS screen due to the fact it doesn't boot up that far.
View 4 Replies View RelatedI have 2 windows updates that haven't installed for about a month now. Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656351)
Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) I don't have a clue why but everything installs fine. I install them, restart my computer and everything does its thing while that's happening and they just pop up again when I do a search for updates after computer has restarted.
My computer was working fine until I downloaded the windows service pack 1. First it was every now & then but soon my computer was freezing up ( not responding ) and it was impossible to even complete a document. This happens in all applications. I noticed with each new window update the worse my computer got. Still under warranty I spent hours on the phone with DELL twice, finally I did a fresh re-install of windows 7 professional. After the fresh install everything was fine. UNTIL I downloaded the windows updates, it started to 'not respond' again. I uninstalled the updates. The not responding issue is gone but I am concerned about windows security updates. Do I need them? I have contacted windows about this issue many times over the past several months with no response.
View 3 Replies View Related