I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies
I just got a used laptop, popped in a new hard drive, and installed a legit version of Windows 7 Ultimate from scratch. Everything went smoothly, it picked up on all my devices & installed drivers correctly. The only problem is - I can't update Windows. When I go to start--> all programs--> windows update, it goes to "checking for updates" and does that - forever and ever - even if I leave it go overnight.
View 1 Replies View RelatedI have installed a legit Windows 7 OS on my laptop. Its not an upgrade, it was a blank hard drive. WIndows 7 installed flawlessly, picked up all my drivers. The only problem is I am having problems with Windows 7 updates. When I choose Windows 7 update, it says "Checking for updates" and stays like that - forever. Even the next day. I did heavy heavy research, found out others are having the same problem. I tried all the fixes I could find, which are listed below:
1. No Anti-virus programs installed yet - brand new Windows 7 ultimate installation
2. There is no spyware - its a brand new clean install
3. Firewall shut off
4. Temp files, cookies, history cleared
5. background intelligent transfer service set to automatic in services.msc
6. software distribution folder renamed
7. tried shutting off automatic updates and doing it manually
8. Added windowsupdate to trust zone
9. ran MicrosoftFixit50202 in normal and advanced mode
Even with my internet SHUT OFF (turned off modem) it still checks for updates and doesn't fail with "No internet connection available".
When i shut down my computer(acer), it started the updates download and it would get struck at there for hours. I am forced to shut it down.
View 1 Replies View RelatedWhenever I'm checking for any updates (vaio care or ATI) a pop up window appears "Internet explorer has stopped working". And error reporting fails. The process linked with it is werFault.exe. I don't know what to do.
View 1 Replies View RelatedWindows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 Replies View RelatedIt appears to be solved, however Windows Update does not work. I get the message "Windows Update cannot currently check for updates because the service is not running. You may need to restart your computer." Needless to say, the restarts do not help. I also tried installing Windows Essentials for virus protection which could not receive updates. I have since uninstalled an am using Clamwin for virus protection.
View 7 Replies View RelatedI've installed the updates upon request. It's been two days now and the pop up keeps on coming saying the same two updates available. I checked the update history and the updates were all installed successfully. These updates are actually a few years old and it's odd how they just popped up. The updates were for MS Framerwork KB2600217 and KB2656351
View 1 Replies View RelatedI'm having a problem with Windows Update. It's managed to install a few updates, bust most of the updates that it automatically finds fail to install (many important ones too - security updates, etc.). A bit frustrating. For the past couple of days, it tries to install the same two updates every time I turn off the computer. The process takes about 40 minutes. Then it shuts off without an error message. Afterwards, when I turn the computer on again, it doesn't say anything but there are once more two updates that need to be installed - the same ones. It's been quite frustrating. For now, I've got the updates turned off, so it won't try to install them any more, but that's only a workaround and no solution.
I think the problem might be connected with some other installations problems. I've tried to download the updates and install them manually, but it didn't work either; first it said that my virus scanner was interfering (I disconnected from the Internet, deactivated the virus scanner, and tried it again, which got a little bit further but not all the way). At the end I got a kind of dubious error message, which I sadly haven't written down, but it was similar to the ones that I got when I tried to install Microsoft Office and also was unable to get the installation to run through to the end. In both instances, the installation was almost done, after which I got a message that there was a problem with some assembly components, and then it undid the changes. This normally took more than an hour - 30 minutes for the installation to get to the point where it started over, an hour to get it to cancel itself. Haven't found a solution there, and that sucks, because I really need it. I've got a lot of files saved in OneNote format that I can't use and need for work.
The Office error messages led me to a couple of forums where it had worked out because people had updated their .NET framework. I can't do that because .NET is part of the OS framework in Windows 7, apparently. Then I read that some other people had just used Windows Update to update their OS, and then it worked. That's what led me to the discovery that my updates weren't working. I believe that that's got something to do with the problem.I've installed some software, but there's the problem with Windows - I can't install it at all. Not sure what to do here. Windows Update lets me look at the update history. I've found that I get the error code 643 for the two updates that have repeated over the past two days again and again. For the other ones it's a little different; they tried to install once and didn't work. For those, I get following code: 80080005.
several of the Windows 7 machines on our domain here at work are reporting that windows could not search for new updates. We have just recently had a new server installed SBS2011 and then shorty after is when this issue sprang up. The windows xp machines are able to update fine.
View 9 Replies View RelatedDoes the Windows Update in 7 do an adequate job at updating drivers or is there really a practical use of any of the driver update software
View 4 Replies View Relatedfor a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).For some reason, it has decided not to recognize the drivers on my laptop.I have tried to uninstall and reinstall (no go).I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason no access yes I am Administrator).Reinstall again still no go.The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful still no printer. Now, it is unsuccessful again.I don't use the Fax component.The reinstall from the CD is successful, but when I plug in the printer, it fails."Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. [code] Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing.It never did this before when I was happily printing away from both computers.
I have no problem printing from the XP machine when it's plugged in there all is good there.I have been to the Canon website and downloaded the latest drivers, which installed perfectly, but again when I plug in the printer, it fails to install the fax driver and the printer won't work..I have also tried all of the various USB ports and ruled that out.I've also run the Hardware and Devices Troubleshooter also without success.Also, I don't know if this is relevant or not, but I can't even print to PDF. My CutePDF program is also not working. I thought this may have been a workaround until I got the printer working again, but no luck.CutePDF will go thought its processes (it's now ticked as default as my Canon is now longer even listed), up till the point where you need to name the file you're creating (that box doesn't appear) all you get to do is print, choose CutePDF, then it disappears no file or if there is, I have no idea where it's gone or what it's called can't find a trace of it.I have not downloaded or installed any other programs (except Windows Updates) in some time that could have caused this. I am at a loss. This is a business computer and printer and is causing much angst.I am running Windows7 (64bit) on an Acer Aspire Laptop (only 16 months old) Firefox 13.0.1.Also running Microsoft Fixit for Printers doesn't even detect the printer and tells me to install one it already is As does the Troubleshooter Does not detect the printer.
since i got my computer i try to windows update i get this error, windows update cannot currently check for updates cause the service isnt running try to reboot, ive done that and it didnt work and sometimes when i got into the update thing it freezes and not resopds.
View 9 Replies View RelatedEvery time I shut down, Windows Update installs the same 2 updates. It never gives an error message saying that the install failed. It just insists on doing it again. This is the update from last week, I guess. I'm afraid I'm at work and away from the affected computer. It's not critical, it's just annoying, bc shutdown now takes too long.
View 8 Replies View RelatedI recently formatted my Dell Inspiron Duo netbook, with Windows 7 Home Premium 32bit. I installed all of the software which I run on it without any problems.When I try to update Microsoft Office 2010 Professional Plus (32bit) Windows Update only finds a few updates, and after they're installed it doesn't find anymore updates. It doesn't even find Office 2010 SP1.{Note: I had no problems with other updates like Microsoft Visual Studio 2010 or other Microsoft updates.I tried uninstalling Office 2010 and installing it again but nothing changed. The privacy settings which show up the first time you run an Office application I set it as "Recommended settings".I also tried downloading Office 2010 SP1 (32bit) and when I tried to run it an error came up saying something like version mismatch (I presume that you need to install other updates before running the setup & I also tried to download an other update but the same error came up.)
View 3 Replies View RelatedOk over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit
So I checked to see if they failed and they were installed successfully!
I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.
I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.
I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!
edit (Ian): This thread has been split from an audio drivers topic, as it may be of use to others having C004F012 errors.
When I went to install the x64 drivers, I got a message saying that my Operating System was not compatible, but then it asked me if I wanted to run it under the correct settings, which I did and then it installed. As for the Windows Updates, I tryed to run them and I get "Windows could not search for new updates" and error code C004F012.
Why does MS update push 32 bit updates to my 64 bit machine?
View 3 Replies View RelatedI have tried updating them one-by-one but they still end up failing on me.
View 9 Replies View RelatedI have Hp Pavillian, Windows 7 Home Premium Edition, 64bit system. Everytime Windows downloads Windows updates, it is successfull downloading and installing, however, I then get a message saying: Failure configuring Windows Updates, Reverting Changes, Do Not turn off your computer.
I have gotten Windows Fixit for Windows Updates and installed....but that does not clear up the problem. I have not wanted to use Restore feature of Windows 7, since I have installed many critical programs that I use. Is there any other solution out in Cyberspace that will help resolve the "Failure Configuring Windows Updats".
Windows Update no longer working. Cannot update .NET Framework or install security updates. Get persistent bluescreen errors related to PFN. Now experiencing Internet connectivity issues even though network hardware appears to be operating fine. Current anti-virus does not detect any issues. Can't reinstall my Windows 7x64 upgrade or SP1 - because cannot install updates. Ready to rebuild ground-up with new Windows 7 disk.
View 2 Replies View RelatedReading around, it seems like everyone seems to have issues getting updates to install.This is on a freshly installed copy of 7 Pro x64 SP1.And here it fails later (it only tries to install 3 updates. the Update readiness tool spends awhile using a single core of my computer to install only to fail)DIT: UPDATE: after trying over and over, looks like the update readiness tool finally installed! I didn't change anything... really strange.
View 5 Replies View RelatedI have Windows 7 Ultimate and I have my Windows Update settings set to "Download updates but let me choose whether to install them." The reason I use this setting is because even though I usually install the updates (because mostly they improve things), sometimes I'll see an update that I know I do not want to install. So I want to have control over which updates get installed.However, I ALWAYS want to install the latest "Definition Update For Microsoft Security Essentials", and since those updates are released very frequently, it's very annoying to always have to install them manually. Is there a way that I can have ONLY those definition updates installed automatically while still leaving it so that all other updates are not automatically installed?
View 5 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I have a Toshiba laptop A500 series running Windows 7 Home premium 64 bit. the computer was purchased in May. I am using MSE and Panda as my anti Virus--and Malwarebytes also. I scanned with all of them yesterday and they say my computer is free form anything malicious. However 2 times this week including this morning at startup the computer is checking C. I am worried that something is wrong.
View 2 Replies View RelatedWhen I first start up the computer I can surf the web, listen to music and even do some light gaming with no problems, and the performance is quite snappy. But, if I try to open the control panel, or view the system specs, or change my home group or anything like that I get problems. First, the window will take forever to open and run the CPU up to 100%, and when the window opens it will still be maxed out. If I open Task Manager all the processes will read 0% even though the manager itself reds 100% usage. My system has a 3.4 Ghz P4 with 2 Gigs of RAM.
View 5 Replies View RelatedI installed Windows 7 SP1 64-bit on a Toshiba laptop which used to have Vista 32-bit on it.Yesterday I put in all the Toshiba drivers and ran chkdsk and am pretty sure it was ok.I ran chkdsk tonight and got a message that was so quick I can barely read it, but on reboot at the end it says "A disk checking has been scheduled. Disk checking has been cancelled" which comes and goes very quickly.In BootExecute in the registry it seems OK and shows it as "autocheck autochk*".
View 6 Replies View RelatedRecently, it takes forever to shutting down Win 7 , while opening/starting Win 7 has no problem at all. Often, I need to forcibly shut down Win 7 by using a power button at the top of the PC.
View 2 Replies View RelatedI'm backing up about 1.7 TB of data to a network drive, and its taking an extremely long time. I'm running Windows 7 64bit Ultimate. I'm fully up to date. I saw some random article about a hotfix for this issue and downloaded it but I guess I already had it installed as the installation wouldn't proceed, but instead said it wasn't for my computer. Should I look towards another software backup program?
View 9 Replies View RelatedHaving a problem with Windows 7 in that it takes forever to load and the network icon spins and spins. In a about 15 minutes everything returns to normal. If I go into safe mode with networking it loads very quickly. Have tried to disable all non-MS services does not make a difference. Have also tried normal and selective startup. Check for latest drivers/firmware updates. Performed the usual cleanup and check disk. SFC did not find any missing or corrupt files. Scanned and removed malware. Waiting for it to reload to look at event viewer logs.
Windows 7 64bit SP1
Compaq Presario CQ5123F
CPU Pentium Duo Core E2500
[Code].....
recently, I have gotten adware or malware claiming to be an antivirus says i have 48 viruses and trojans that I got rid of with malwarebytes. Days later I tried to connect to my wireless router with an endless loop of "identifying network" as a result. I'm 100% sure its not the router because I went to my friends house and tried connecting there with no luck.
View 2 Replies View Related
