recently, I have gotten adware or malware claiming to be an antivirus says i have 48 viruses and trojans that I got rid of with malwarebytes. Days later I tried to connect to my wireless router with an endless loop of "identifying network" as a result. I'm 100% sure its not the router because I went to my friends house and tried connecting there with no luck.
View 2 Replies
Whenever i boot up my Windows 7 x64, on the lower right side of bar the blue circle keeps on spinning while it says windows is identifying the network, any idea how to speed up the process of network identification, it takes about 3 mins to identify the network,...fyi i am not using wireless router, it is Motorola surfboard
View 1 Replies View Relatedi have problem with my pc...my pc keep identify network and cannot access to the internet.i using LAN...i try to reistall driver,reset LAN adapter...But my problem not solved.
View 1 Replies View RelatedSo I'm running Ultimate x64 using Outpost Pro 6.7 when the pc boots up it says identifying network. This takes at least 3 minutes to do. I turn off OP and reboot it starts immediately (OP not running). Is anyone else experiencing this issue? I have been searching for days to no avail. I am kinda partial to Outpost. Once it identifies the network everything works. I can share files with other pcs and all. I am also using Linksys WRT54G router with OpenDNS. Any help would be greatly appreciated.
I also posted over on OP forums with no response yet. I can't believe I'm the only one experiencing this.
I have Windows 7 Ultimate installed on my machine. Whenever I try to connect to a wireless network it does not get connected. It keeps only identifying...
I am getting IPs using DHCP only and rest all things like authentication are correct.
If I run "ipconfig -all" it gives "Media disconnected" for all adapters, does it mean it's hardware issue?
I have a laptop in our office that is about 4 months old and is constantly identifying the wireless network. I have tried everything! I even have just re formatted it and re installed everything from scratch but I still have the same problem.
View 4 Replies View RelatedI have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 7 Replies View RelatedI have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 5 Replies View RelatedMy wireless won't connect to the internet at work and get stuck saying it is identifying. It works at home. All the other computers in the office work so it must be my computer. I've tried stuff on other forums or just get ignored. I operate a Lenovo V570 with Windows 7 64bit. The internet works when wired. Its just the wireless.
View 3 Replies View RelatedMy wireless won't connect to the internet at work and get stuck saying it is identifying. It works at home. All the other computers in the office work so it must be my computer. I've tried stuff on other forums or just get ignored. I operate a Lenovo V570 with Windows 7 64bit. The internet works when wired. Its just the wireless.
View 5 Replies View RelatedI have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 1 Replies View RelatedI recently purchased an HP DV7-4285 Laptop with Windows 7 Home Premium 64 Bit installed on it. After spending this weekend "De-OEM'ing" the machine (uninstalling the crap I don't need and installing the software I do need along with optimizing everything), I've noticed 2 things that I wonder if there is anything that can be done to eliminate:First, upon bootup, when the desktop shows up and the few icons show up in the System Tray (I'm old fashioned, I know it's the "Notification area" now!), I get the icon that indicates its searching for a network to connect to. Now I'm really old fashioned when it comes to network connections. I don't use Wi-Fi, and I don't have WiMAX either, nor do I have an air card from my cell phone provider. I only connect to the internet with a wired connection because I simply don't trust Wi-Fi and don't have a need for WiMAX. Every time this machine boots up, it takes upwards of a minute for it to stop "searching" for a network. I only plug this machine into the network to get online when I need to, I don't stay connected all the time. Is there any way of being able to stop Windows from trying to search for a network every time the machine boots up? My desktop machine which has Windows 7 Professional 64 Bit does this also but only for a few seconds.
Second: When I enter my password to log into this machine, it will then put up a screen that says "Please Wait", which is normal, then sometimes that screen will go blank for a couple seconds, then come back saing "Please Wait", then take me to the Windows Desktop. Everything otherwise loads as normal from that point. Any idea why this is happening??? As far as internet security software that is installed on this machine (I wasn't sure if this was the reason for this), I have McAfee VirusScan Plus, Ad Aware, Spy Bot, Privacy Mantra, and CCleaner installed.
I have recently been having difficulties with connecting with my wireless connection. We have a in-home router that is connected to two computer's downstairs by cable. I however own a Acer, Windows 7 laptop that I mainly use upstairs and I get a Excellent signal strength.I have connected to my Home wireless connection before with no problem but recently the connection keeps coming up as ~Identifying... No Internet Access.Also when I have had connection to this network prior to this problem the connection is under Home. But when I try to connect to the same network it comes up as Public or just keeps Identifying. I have the connection set to Connect Automatically.Also the yellow triangle with the exclamation point almost always pops up immediately when I reboot my system or after I Disconnect and Connect the network again. I have tried Disabling and Enabling the network in the adapter settings and this does not work either. In the manage wireless networks tab, I have repeatedly deleted the connection and reentered the security password and again put it as automatically connect but it still comes up as Identifying. I have seen many people with this same problem and have tried many of the suggestions to no avail.It is rather bizarre because my connection will be in this Identifying state for a while and randomly connect properly and I have no idea what makes it go off and on so erratically. I just had it working again for a few days and it is again acting up.
View 4 Replies View RelatedI'm trying to connect my machine to a network over (wired) LAN. The connection (including internet) works fine in general, but when I open the "Network and Sharing Center", under "View your active networks" it only says "Identifying..." and the network name never appears. I think it has something to do with the (Cisco) routers not supporting the "Broadcast" flag, but disabling it in the registry didn't help either.I need to set my network type to home, but in order to do that Windows needs to recognize it first...
View 9 Replies View RelatedWhen I first start up the computer I can surf the web, listen to music and even do some light gaming with no problems, and the performance is quite snappy. But, if I try to open the control panel, or view the system specs, or change my home group or anything like that I get problems. First, the window will take forever to open and run the CPU up to 100%, and when the window opens it will still be maxed out. If I open Task Manager all the processes will read 0% even though the manager itself reds 100% usage. My system has a 3.4 Ghz P4 with 2 Gigs of RAM.
View 5 Replies View RelatedWhen i shut down my computer(acer), it started the updates download and it would get struck at there for hours. I am forced to shut it down.
View 1 Replies View RelatedRecently, it takes forever to shutting down Win 7 , while opening/starting Win 7 has no problem at all. Often, I need to forcibly shut down Win 7 by using a power button at the top of the PC.
View 2 Replies View RelatedI'm backing up about 1.7 TB of data to a network drive, and its taking an extremely long time. I'm running Windows 7 64bit Ultimate. I'm fully up to date. I saw some random article about a hotfix for this issue and downloaded it but I guess I already had it installed as the installation wouldn't proceed, but instead said it wasn't for my computer. Should I look towards another software backup program?
View 9 Replies View RelatedHaving a problem with Windows 7 in that it takes forever to load and the network icon spins and spins. In a about 15 minutes everything returns to normal. If I go into safe mode with networking it loads very quickly. Have tried to disable all non-MS services does not make a difference. Have also tried normal and selective startup. Check for latest drivers/firmware updates. Performed the usual cleanup and check disk. SFC did not find any missing or corrupt files. Scanned and removed malware. Waiting for it to reload to look at event viewer logs.
Windows 7 64bit SP1
Compaq Presario CQ5123F
CPU Pentium Duo Core E2500
[Code].....
I just got a used laptop, popped in a new hard drive, and installed a legit version of Windows 7 Ultimate from scratch. Everything went smoothly, it picked up on all my devices & installed drivers correctly. The only problem is - I can't update Windows. When I go to start--> all programs--> windows update, it goes to "checking for updates" and does that - forever and ever - even if I leave it go overnight.
View 1 Replies View RelatedI have installed a legit Windows 7 OS on my laptop. Its not an upgrade, it was a blank hard drive. WIndows 7 installed flawlessly, picked up all my drivers. The only problem is I am having problems with Windows 7 updates. When I choose Windows 7 update, it says "Checking for updates" and stays like that - forever. Even the next day. I did heavy heavy research, found out others are having the same problem. I tried all the fixes I could find, which are listed below:
1. No Anti-virus programs installed yet - brand new Windows 7 ultimate installation
2. There is no spyware - its a brand new clean install
3. Firewall shut off
4. Temp files, cookies, history cleared
5. background intelligent transfer service set to automatic in services.msc
6. software distribution folder renamed
7. tried shutting off automatic updates and doing it manually
8. Added windowsupdate to trust zone
9. ran MicrosoftFixit50202 in normal and advanced mode
Even with my internet SHUT OFF (turned off modem) it still checks for updates and doesn't fail with "No internet connection available".
I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies View RelatedYesterday I bought a new hard drive. I went from a Western Digital Caviar Blue 500GB to a Western Digital Caviar Blue 1TB. So, same family of HDDs. I put in a burned Windows 7 install disc, and the process went okay until after the computer restarted and moved on to 'Completing Installation'. It just sits there. It doesn't freeze - I can move the mouse and there are three little dots after 'Completing Installation' that continue animating. I can also click the red X at the top-right but it says installation cannot be canceled at that point, which makes sense.I first let it sit on 'Completing Installation' for two hours. Then I turned my computer off, unplugged everything except for my mouse and keyboard, formatted the drive to get rid of any bad data, and tried again. After three hours of 'Completing Installation', I removed my video card, all but one stick of RAM, and entered the BIOS to see if there were any options relating to my hard drive. The only options I found were the options to choose a hard drive - I only have the one - and a couple of Plug and Play options. I restarted setup again, formatted again, and started the process over. Then I went to bed.
This morning, seven hours later, it was still sitting at 'Completing Installation'. I tried taking the install disc out to see if the install would stop or throw up an error, but it didn't make a peep. I took the install disc to my other computer to copy the data to a folder on the desktop, to see if there was an error. Everything copied fine. Plus, when I burned the DVD, I burned it at the lowest possible speed and had the program verify it. Everything came up fine.One thing I'll mention - when I start setup, I'm given an option to install a driver. I decided to choose that option just to see if it might provide any clarity. It then showed me the contents of my hard drive. Program Files was in there, My Documents was in there. So setup is doing something, it's just not finishing for some reason.
From day one after a fresh install on my then new machine i've noticed this. The welcome screen hangs for about 1 minute if i use a solid color for the desktop instead of a background. I fixed it about a year ago by using a background instead of a solid colo. I however hate backgrounds and much prefer black. So i made a solid black jpg and used that. Well, long story short, i think that background makes it take forever sometimes when opening a picture in windows photo viewer ! Fix one issue, the fix causes a new one. Welcome to the world of MS windows !!! I removed the background and pics then opened up immediately. So i seem to have a choice of either quick startup and slow jpg's or visa versa.
PS: the startup issue is obviously a bug in Windows 7, and i know this because I've had it happen on 2 other PC's.
i created a partition and formatted it of 70gb to install windows 7 in it. Im obviously using the clean install method, everything goes fine. It expands the files, it installs them,copies them, etc. When my system is booting up, it shows me the screen of windows below saying "windows is starting up", the problem is that windows never starts up, i left it for a night, and it didnt start up, it just stayed there. Im trying to install windows 7 64bit, any help would be greatly appreciated.
View 9 Replies View RelatedI recently noticed my computer taking long to bootup (stuck on the Windows Logo screen for about 5 minutes or more) when I have my extra IDE Harddrive and CD Drive plugged in. However, when I unplug both of them, the computer boots faster.
View 13 Replies View RelatedI have windows 7 home premium 32bit on a pretty fast AMD phenom II x4 with 4gb ram. The problem I ahve is with windows explorer. When I click on a drive, it takes about 5 seconds before it will show me the folders. Then when I click on a folder, I have to wait as a little hourglass-type slider goes across the top of the screen before it will show the contents. This can take anywhere from 2-15 seconds. I don't remember any other windows OS doing this.Is there something I can change to help speed this up? Not sure that it matters, but I checked defrag and most of my drives are less than 5% fragmented - the most being 15%.
View 2 Replies View RelatedI went to Warwick University a couple of weeks ago and they used some presentation software during a talk. It was basically like a slideshow, but instead all the slides where next to each other (in all directions) and the program zoomed in and out of each particular part.
View 6 Replies View RelatedI still couldn't get my wireless internet to begin working on my laptop. It goes between saying "Identifying... (NETGEAR) No internet access" and something like "Unidentified (something something) Limited Access." I've had this problem for about 2 weeks now and I just can't get it to work.I had the rundll32 virus and I believe something called "PING.exe" and I got rid of them with TDSSKiller, but after the reboot my internet wouldn't work and I got a prompt saying that PowerISO couldn't launch properly or something like that. I uninstalled PowerISO but the internet problem remains.
View 3 Replies View RelatedHow do I find out if the version of the chipset drivers that Windows 7 RTM 64-bit installed automatically is the same as the latest chipset drivers listed on the ASUS website (model M4A78T-E)?
View 7 Replies View RelatedI have problem with wireless. When i connect into the network sometimes my PC create other "network-name2" or "unidentified" network and then i don't have internet :/ Wireless card very slow identifying connections other times all thinks going verry good 1-2hours. I guess this is problem with windows 7, because when I reinstall my OS, few months everything is going well and boom... problems from nothing. I tryied reinstall drivers but nothings happens.I have Intel Wireless WiFi Link 4965AGN hardware + windows 7 ultimate 32bit.
View 3 Replies View Related
