Windows 7 Install On New HDD 'Completing Installation' Forever
Oct 26, 2012
Yesterday I bought a new hard drive. I went from a Western Digital Caviar Blue 500GB to a Western Digital Caviar Blue 1TB. So, same family of HDDs. I put in a burned Windows 7 install disc, and the process went okay until after the computer restarted and moved on to 'Completing Installation'. It just sits there. It doesn't freeze - I can move the mouse and there are three little dots after 'Completing Installation' that continue animating. I can also click the red X at the top-right but it says installation cannot be canceled at that point, which makes sense.I first let it sit on 'Completing Installation' for two hours. Then I turned my computer off, unplugged everything except for my mouse and keyboard, formatted the drive to get rid of any bad data, and tried again. After three hours of 'Completing Installation', I removed my video card, all but one stick of RAM, and entered the BIOS to see if there were any options relating to my hard drive. The only options I found were the options to choose a hard drive - I only have the one - and a couple of Plug and Play options. I restarted setup again, formatted again, and started the process over. Then I went to bed.
This morning, seven hours later, it was still sitting at 'Completing Installation'. I tried taking the install disc out to see if the install would stop or throw up an error, but it didn't make a peep. I took the install disc to my other computer to copy the data to a folder on the desktop, to see if there was an error. Everything copied fine. Plus, when I burned the DVD, I burned it at the lowest possible speed and had the program verify it. Everything came up fine.One thing I'll mention - when I start setup, I'm given an option to install a driver. I decided to choose that option just to see if it might provide any clarity. It then showed me the contents of my hard drive. Program Files was in there, My Documents was in there. So setup is doing something, it's just not finishing for some reason.
View 2 Replies
ADVERTISEMENT
Feb 9, 2010
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
View 9 Replies
View Related
Mar 10, 2012
I seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]
View 3 Replies
View Related
Feb 23, 2009
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
View 7 Replies
View Related
Oct 12, 2009
I ordered a Windows 7 Home Premium Family pack about 2 months ago and it arrived last week. While I wasn't expecting it until October 22, I figured "why look a gift horse in the mouth". However, when I try to install it I hit a problem. I had Vista Ultimate installed and attempted an upgrade. Everything went fine until I got to the "Completing Installation" part. At this point the installation just stops. I've left it sitting here for over 8 hours with no results. I have tried doing a clean install, deleting and formatting the previous Windows drive, and always the same thing happens. There is no error message, it just stops. When I do a hard shutdown and reboot, I get the message that the computer experienced an unexpected shutdown and to reboot my computer. I get the same message when I reboot. I called MS who told me that support will not be available until 10/22.
View 9 Replies
View Related
Sep 3, 2011
The three dots beyond completing installation continue to move, but the progress bar hasn't moved all night. It's been twelve hours. Should I manually shut down and reattempt install?
View 13 Replies
View Related
Feb 1, 2013
I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.
View 1 Replies
View Related
Jun 5, 2011
Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake
[code]...
Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.
View 9 Replies
View Related
Dec 6, 2011
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU
Nvidia GeForce 7800 or smthng 512mb
4GB ram
2x120GB WD HDz
View 3 Replies
View Related
Aug 6, 2009
SUMMARY: Windows 7100 x64 installation freezes on splash/loading screen during the first restart after the last step of installation.
Let me start by saying this all started 4 days ago when Windows 7 Ultimate build 7068 x64 randomly started refusing to let my router assign my machine an IP address. It was a hard-line connection and had been working fine for weeks.
No hardware changes, no software changes, no network changes, and poof--no connectivity. Other machines and OS's connected to it fine, and my machine connected to OTHER networks fine. Two days of router hard resets and windows registry hacks yielded absolutely no progress, so I arrived at a reinstallation of Windows.
I decided that since I was going to lose all data anyhow, I would take that opportunity to update the firmware on my SSD--which, if you've never heard of this process-- it is no small feat. After consulting with 4 IT professionals at work, whoring out 3 different PC's, obtaining a mild concussion, and an act of congress, I finally got a formatted, blank SSD with updated firmware ready to re-install windows to.
I created a 7100 x64 installation disc using Microsoft's ISO and booted from it. Installation went smoothly all the way up to the very last step (when the screen resolution changes from default low-res to OS-worthy normal resolution) and then setup says it needs to restart one last time.
It appears as though this time when it restarts, it actually boots from the hard drive, rather than the installation program. I got the animated windows icon with the black back drop, and then before the OS pops up it just hangs and freezes.
No keyboard input is responsive (ctl + alt + delete doesn't work) once it freezes, and a "repair installation" just yields a "Windows cannot repair this installation" message. I tried everything I can think of and there is no way to get past it. Botting it in safe mode just says "Windows cannot boot in safe mode because setup needs to complete first."
For sanity's sake, I wiped the disc again and installed XP x64 and it installed lickedy-split just fine. I don't understand though, because I was running build 7068 no problems beforehand, and it wasn't hard to install at all.
View 5 Replies
View Related
Jun 15, 2010
I've been trying to install Windows 7 for like 3-4 times now and every time I get to the Completing Installation part I wait a little and suddenly I get a red error box and it says something about "Windows cannot be installed..." and then pc shuts down. The error box is there for like 0.5 seconds so I cant read it, but its just like 1 sentence. "Cannot be installed" and something after that.
View 2 Replies
View Related
Mar 2, 2012
not getting access to the net after completing new installation
View 1 Replies
View Related
Oct 31, 2010
I am at the last part and it seems to be froze, it says "completing installation" its doing nothing, the little "..." at the end of the text are still going but that's it, is this normal? I am installing through a USB.
View 5 Replies
View Related
Nov 29, 2009
I installed win 7 on my laptop. After completing the instalation, I started with update all drivers through device manager. When monitor software was finished with updating, monitor have had a black screen. There is no signs of life after many times of switching off the laptop on switch button.
I have tried to remove drivers in safe mode, but f8 or f10 on starting up does not run. Simply, screen is black, as it is no part of laptop.
Model of laptop is fujitsu siemens, model of monitor is samsung.
How can I resolve this?
View 3 Replies
View Related
May 1, 2012
I am stuck at the completing installation stage after reboot. Heres what I've tried:
Removing all but 1 stick of ram
Only have the HDD im installing to plugged in
Using the mobo vga with video card undone
Have all USB devices unplugged ( except keyboard )
Disabling everything in "Other" in device manager
Disabled display driver in device manager
I received this error in the event log: Cd rom has bad block under the administrative tab
ASUS Sabertooth Z77
Intel Sandy Bridge i5-2500k
GSkill 8gig Ares series
View 6 Replies
View Related
Dec 25, 2011
I wiped my hard drive and now when I tried to reinstall windows 7, it keep freezing on |completing installation" I reformated my hard drive before doing it. If my computer ed or do I need to just wait it out?
View 1 Replies
View Related
Jun 1, 2012
Ok so yesterday I did a boot and nuke, completely wiped the hard drive because Vista had made it crash pretty bad earlier. Did plenty of check disk and memory tests beforehand and everything was fine.
Now, I am trying to install Windows 7 and I get to completing installation and it tells me it can't finish because an installation file is corrupted.
I have formatted the hard drive to no avail. Right now I am cleaning the disk through cmd prompt. The DVD is a valid copy, purchased from a military store, brand new.
View 6 Replies
View Related
Feb 16, 2013
I am re installing Windows 7 on a Dell Inspiron laptop. I used the disc that came with the system. Everything went smooth and restarted a couple of times but once it got to "Completing installation", it's been stuck on it for about an hour. I'm assuming that's not right because I've installed Windows 7 numerous times. The green status bar on the bottom isn't moving at all if that helps. What should I do?
View 3 Replies
View Related
Apr 26, 2010
This computer had Windows Vista installed and the hard drive crashed... So I bought a new Seagate 500g hard drive. I have tried installation of Windows 7 about a half dozen times; always with the same outcome.I noticed that the installation hangs while completing the installation after the display is switched to higher resolution.
View 1 Replies
View Related
May 11, 2010
Unplugging all USB devices that aren't needed. Updated Bios to the most recent version available and reset back to defaults. Double check that all essential hardware is compatible with 64 bit ( the documentation I've found says that all of my hardware is ok). Tried booting from DVD, burned at slowest speed. Tried booting from USB. Tried both 32 and 64 bit versions with the same results
why Windows hangs at the "completing installation" point?
View 9 Replies
View Related
Nov 4, 2009
installing Windows 7 Ultimate 64-bit on my computer would completely freeze up. At completing install.
1.tried upgrade
2. tried clean install nothing plug into usb ports only plug in are keyboard and mouse still freezes on last part of Installation.
View 3 Replies
View Related
Nov 19, 2009
I would very much like to try out Windows 7, since all I read about it is very positive. I am trying to install the 64 bit version on my computer, but no matter what I do, it keeps freezing at "Completing installation" after the first reboot. For a minute or so the dots-animation is still working and I can move the mouse, but after that, it just completely freezes.
Some background information:
- I have a Asus P5K-E/WiFi mainboard with the latest BIOS installed (also tried an older BIOS);
- My processor (Intel Q6600) is overclocked to 3 GHz, but I have also tried the install at stock speed (2.4 GHz);
- The jMicron controller is disabled;
- SATA mode is AHCI. This is working fine with my Windows XP installation;
- My video card is a Radeon HD2600 card with 2 DVI outputs, both connected to a monitor. I also tried connecting just one monitor, without success;
- It doesn't matter whether I install from DVD or USB flash disk, the exact same thing happens;
- I have a USB soundcard (Digidesign MBox I), but disconnecting it during installation doesn't help;
- I use a Logitech USB mouse/keyboard set;
- I have two DSP cards installed in my PC, a UAD-2 and a SSL Duende, both working fine with XP.
I'm puzzled. Anyone have a clue?
View 2 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Apr 16, 2012
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 1 Replies
View Related
May 2, 2012
Windows has stopped completing backups. A few weeks ago, I bought an external HD and began doing regular backups that completed with no problems. Now I get a message that Windows backup did not complete successfully. Message also says that the drive that Windows is installed on needs at least 400 MB of free space. My C-drive shows 138 GB of free space and my external HD shows 162 GB of free space. What is wrong?
View 8 Replies
View Related
Apr 3, 2011
When I first start up the computer I can surf the web, listen to music and even do some light gaming with no problems, and the performance is quite snappy. But, if I try to open the control panel, or view the system specs, or change my home group or anything like that I get problems. First, the window will take forever to open and run the CPU up to 100%, and when the window opens it will still be maxed out. If I open Task Manager all the processes will read 0% even though the manager itself reds 100% usage. My system has a 3.4 Ghz P4 with 2 Gigs of RAM.
View 5 Replies
View Related
Jun 20, 2011
When i shut down my computer(acer), it started the updates download and it would get struck at there for hours. I am forced to shut it down.
View 1 Replies
View Related
Nov 11, 2012
Recently, it takes forever to shutting down Win 7 , while opening/starting Win 7 has no problem at all. Often, I need to forcibly shut down Win 7 by using a power button at the top of the PC.
View 2 Replies
View Related
Feb 28, 2012
I'm backing up about 1.7 TB of data to a network drive, and its taking an extremely long time. I'm running Windows 7 64bit Ultimate. I'm fully up to date. I saw some random article about a hotfix for this issue and downloaded it but I guess I already had it installed as the installation wouldn't proceed, but instead said it wasn't for my computer. Should I look towards another software backup program?
View 9 Replies
View Related
Jun 30, 2012
Having a problem with Windows 7 in that it takes forever to load and the network icon spins and spins. In a about 15 minutes everything returns to normal. If I go into safe mode with networking it loads very quickly. Have tried to disable all non-MS services does not make a difference. Have also tried normal and selective startup. Check for latest drivers/firmware updates. Performed the usual cleanup and check disk. SFC did not find any missing or corrupt files. Scanned and removed malware. Waiting for it to reload to look at event viewer logs.
Windows 7 64bit SP1
Compaq Presario CQ5123F
CPU Pentium Duo Core E2500
[Code].....
View 1 Replies
View Related
Dec 10, 2011
recently, I have gotten adware or malware claiming to be an antivirus says i have 48 viruses and trojans that I got rid of with malwarebytes. Days later I tried to connect to my wireless router with an endless loop of "identifying network" as a result. I'm 100% sure its not the router because I went to my friends house and tried connecting there with no luck.
View 2 Replies
View Related