Windows 7 Home Stuck On "Completing Installation"?
Feb 16, 2013
I am re installing Windows 7 on a Dell Inspiron laptop. I used the disc that came with the system. Everything went smooth and restarted a couple of times but once it got to "Completing installation", it's been stuck on it for about an hour. I'm assuming that's not right because I've installed Windows 7 numerous times. The green status bar on the bottom isn't moving at all if that helps. What should I do?
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU Nvidia GeForce 7800 or smthng 512mb 4GB ram 2x120GB WD HDz
Unplugging all USB devices that aren't needed. Updated Bios to the most recent version available and reset back to defaults. Double check that all essential hardware is compatible with 64 bit ( the documentation I've found says that all of my hardware is ok). Tried booting from DVD, burned at slowest speed. Tried booting from USB. Tried both 32 and 64 bit versions with the same results
why Windows hangs at the "completing installation" point?
I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.
Yesterday I bought a new hard drive. I went from a Western Digital Caviar Blue 500GB to a Western Digital Caviar Blue 1TB. So, same family of HDDs. I put in a burned Windows 7 install disc, and the process went okay until after the computer restarted and moved on to 'Completing Installation'. It just sits there. It doesn't freeze - I can move the mouse and there are three little dots after 'Completing Installation' that continue animating. I can also click the red X at the top-right but it says installation cannot be canceled at that point, which makes sense.I first let it sit on 'Completing Installation' for two hours. Then I turned my computer off, unplugged everything except for my mouse and keyboard, formatted the drive to get rid of any bad data, and tried again. After three hours of 'Completing Installation', I removed my video card, all but one stick of RAM, and entered the BIOS to see if there were any options relating to my hard drive. The only options I found were the options to choose a hard drive - I only have the one - and a couple of Plug and Play options. I restarted setup again, formatted again, and started the process over. Then I went to bed.
This morning, seven hours later, it was still sitting at 'Completing Installation'. I tried taking the install disc out to see if the install would stop or throw up an error, but it didn't make a peep. I took the install disc to my other computer to copy the data to a folder on the desktop, to see if there was an error. Everything copied fine. Plus, when I burned the DVD, I burned it at the lowest possible speed and had the program verify it. Everything came up fine.One thing I'll mention - when I start setup, I'm given an option to install a driver. I decided to choose that option just to see if it might provide any clarity. It then showed me the contents of my hard drive. Program Files was in there, My Documents was in there. So setup is doing something, it's just not finishing for some reason.
Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake
[code]...
Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard 3.2 GHz AMD Athlon X2 64 bit processor 4 GB DDR2 RAM Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive) Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
I seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]
SUMMARY: Windows 7100 x64 installation freezes on splash/loading screen during the first restart after the last step of installation.
Let me start by saying this all started 4 days ago when Windows 7 Ultimate build 7068 x64 randomly started refusing to let my router assign my machine an IP address. It was a hard-line connection and had been working fine for weeks.
No hardware changes, no software changes, no network changes, and poof--no connectivity. Other machines and OS's connected to it fine, and my machine connected to OTHER networks fine. Two days of router hard resets and windows registry hacks yielded absolutely no progress, so I arrived at a reinstallation of Windows.
I decided that since I was going to lose all data anyhow, I would take that opportunity to update the firmware on my SSD--which, if you've never heard of this process-- it is no small feat. After consulting with 4 IT professionals at work, whoring out 3 different PC's, obtaining a mild concussion, and an act of congress, I finally got a formatted, blank SSD with updated firmware ready to re-install windows to.
I created a 7100 x64 installation disc using Microsoft's ISO and booted from it. Installation went smoothly all the way up to the very last step (when the screen resolution changes from default low-res to OS-worthy normal resolution) and then setup says it needs to restart one last time.
It appears as though this time when it restarts, it actually boots from the hard drive, rather than the installation program. I got the animated windows icon with the black back drop, and then before the OS pops up it just hangs and freezes.
No keyboard input is responsive (ctl + alt + delete doesn't work) once it freezes, and a "repair installation" just yields a "Windows cannot repair this installation" message. I tried everything I can think of and there is no way to get past it. Botting it in safe mode just says "Windows cannot boot in safe mode because setup needs to complete first."
For sanity's sake, I wiped the disc again and installed XP x64 and it installed lickedy-split just fine. I don't understand though, because I was running build 7068 no problems beforehand, and it wasn't hard to install at all.
I've been trying to install Windows 7 for like 3-4 times now and every time I get to the Completing Installation part I wait a little and suddenly I get a red error box and it says something about "Windows cannot be installed..." and then pc shuts down. The error box is there for like 0.5 seconds so I cant read it, but its just like 1 sentence. "Cannot be installed" and something after that.
I am at the last part and it seems to be froze, it says "completing installation" its doing nothing, the little "..." at the end of the text are still going but that's it, is this normal? I am installing through a USB.
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
I installed win 7 on my laptop. After completing the instalation, I started with update all drivers through device manager. When monitor software was finished with updating, monitor have had a black screen. There is no signs of life after many times of switching off the laptop on switch button.
I have tried to remove drivers in safe mode, but f8 or f10 on starting up does not run. Simply, screen is black, as it is no part of laptop.
Model of laptop is fujitsu siemens, model of monitor is samsung.
I am stuck at the completing installation stage after reboot. Heres what I've tried:
Removing all but 1 stick of ram Only have the HDD im installing to plugged in Using the mobo vga with video card undone Have all USB devices unplugged ( except keyboard ) Disabling everything in "Other" in device manager Disabled display driver in device manager
I received this error in the event log: Cd rom has bad block under the administrative tab
ASUS Sabertooth Z77 Intel Sandy Bridge i5-2500k GSkill 8gig Ares series
Ok so yesterday I did a boot and nuke, completely wiped the hard drive because Vista had made it crash pretty bad earlier. Did plenty of check disk and memory tests beforehand and everything was fine.
Now, I am trying to install Windows 7 and I get to completing installation and it tells me it can't finish because an installation file is corrupted.
I have formatted the hard drive to no avail. Right now I am cleaning the disk through cmd prompt. The DVD is a valid copy, purchased from a military store, brand new.
I ordered a Windows 7 Home Premium Family pack about 2 months ago and it arrived last week. While I wasn't expecting it until October 22, I figured "why look a gift horse in the mouth". However, when I try to install it I hit a problem. I had Vista Ultimate installed and attempted an upgrade. Everything went fine until I got to the "Completing Installation" part. At this point the installation just stops. I've left it sitting here for over 8 hours with no results. I have tried doing a clean install, deleting and formatting the previous Windows drive, and always the same thing happens. There is no error message, it just stops. When I do a hard shutdown and reboot, I get the message that the computer experienced an unexpected shutdown and to reboot my computer. I get the same message when I reboot. I called MS who told me that support will not be available until 10/22.
The three dots beyond completing installation continue to move, but the progress bar hasn't moved all night. It's been twelve hours. Should I manually shut down and reattempt install?
This computer had Windows Vista installed and the hard drive crashed... So I bought a new Seagate 500g hard drive. I have tried installation of Windows 7 about a half dozen times; always with the same outcome.I noticed that the installation hangs while completing the installation after the display is switched to higher resolution.
My 2 year old $400 Acer laptop that has win 7 32 bit home edition locked up while surfing last night and I cannot get it to open.I tried safe mode it hangs up on the starting windows screen. I hit F8 and tried the launch start up repair function to no avail.When the laptop locked up the screen went off white like someone was trying to IM me and nothing opened. I pulled the battery out to shut the laptop down since I didn't like the look of what was happening and none of the buttons or other prompts would work.I have a current version of McAffe and was using Firefox.
I would very much like to try out Windows 7, since all I read about it is very positive. I am trying to install the 64 bit version on my computer, but no matter what I do, it keeps freezing at "Completing installation" after the first reboot. For a minute or so the dots-animation is still working and I can move the mouse, but after that, it just completely freezes.
Some background information:
- I have a Asus P5K-E/WiFi mainboard with the latest BIOS installed (also tried an older BIOS);
- My processor (Intel Q6600) is overclocked to 3 GHz, but I have also tried the install at stock speed (2.4 GHz);
- The jMicron controller is disabled;
- SATA mode is AHCI. This is working fine with my Windows XP installation;
- My video card is a Radeon HD2600 card with 2 DVI outputs, both connected to a monitor. I also tried connecting just one monitor, without success;
- It doesn't matter whether I install from DVD or USB flash disk, the exact same thing happens;
- I have a USB soundcard (Digidesign MBox I), but disconnecting it during installation doesn't help;
- I use a Logitech USB mouse/keyboard set;
- I have two DSP cards installed in my PC, a UAD-2 and a SSL Duende, both working fine with XP.
I'm trying to install Win7 on my PC. I'm getting a black screen right before the language screen is suppose to be shown. This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.
I CHANGED the cd's for couple of times, this is not the cd. I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
I'm trying to install Windows 7 on my PC.I'm getting a black screen right before the language screen is suppose to be shown.This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.I CHANGED the cd's for couple of times, this is not the cd.I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
Right, straight to the point. I've recently been given a few parts of computer from my friends that has now been assembled into a working desktop.I've got Windows 7 saved as a .iso file on a usb-hdd. I manage to get it working up to the point where i click "Install Now" on the Windows 7 installer programme, then after a couple mins of loading once clicked it comes up with this message."A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."There are 3 options that come up with this pop up being "browse" "ok" and "cancel" After clicking "ok" it comes up with another message saying"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
I wanted to install windows 7 on my notebook compaq. When I finish most of the steps. The first windows welcome screen can not load and stops just blue screen.
I tried to log on to my user yesterday, and when I type in my password, it goes into the normal loading screen that says "Welcome" and the loading circle next to it is spinning like it should. Except it stay like that. For hours. I've shut down my computer and tried to log in again multiple times. It keeps doing it. I have no hardware plugged in besides monitor, keyboard, and mouse.
Okay so i have this machine, acer m3100, that originally had windows vista. I tried to do a clean install of windows 7, with an original windows 7 installation cd.Everything would go okay until right after the computer restarts and goes to the part of COMPLETING INSTALLATION. At that moment my screen suddenly flashes with the blue screen of death. i wasnt able to right the error that shows up though. Then the computer restarts and goes to setup devices and right after that an error message appears saying, windows did not complete installation, due to an unexpected restart, restart the computer and restart the installation. If i click okay it will go into an endless loop. Restarting one time after another. So i thought i would install windows vista again. Try to make things the way they were before, but i get the same error. i'm only able to install xp. With XP everything works fine. I do want to be able to install windows 7 though.
I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
Satellite A505 is stuck on the Windows 7 recovery screen. I launched the recovery back to a date when the system was working and now the system is stuck on this screen.
Every part of the computer is completely new.Its a selfconfigured system...
Processor: AMD FX-8120 3,1GHz Mainboard: Gigabyte GA-970-UD3 (BIOS F4) RAM: DDR3 2x4GB 1600MHz Graphics: Nvidia GeForce GTX 560 TI 1GB SSD: 120GB SATA 6Gb/s DVD: SATA Liteone iHas122 OS: Windows 7 Home Premium 64 Bit
So basically my problem is what is stated in the topic already.Windows loads the data off of the ORIGINAL (purchased it today) DVD, extracting files etc.Then after the Computer restarts and loads, the installation process comes back up again, and shows the "moving dots" behind "Finishing Installation Process" for about 10-15 seconds, then they freeze... i left it for 2 hours. Nothing happened.I tried unplugging everything during the reset, after another try to install it. It freezes.I tried the "Shift+F10" --> explorer.exe . It freezes.I tried a downloaded copy of Windows 7 Prof.... same thing, it freezes.I tried 3 different Sata2 HDDrives, same thing it freezes.
When I insert the disc and wait until the CD boots and the files loaded the installation screen appears and is just stuck. The mouse goes off and the keyboard is all so off. My configurations are Core i5 2400, 8GB ram