Windows 7 Stuck On Black Screen After Completing Installation

Dec 6, 2011

i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.

Cant remember excactly the PC specs 2,6Ghz Intel CPU
Nvidia GeForce 7800 or smthng 512mb
4GB ram
2x120GB WD HDz

View 3 Replies


ADVERTISEMENT

Windows 7 Home Stuck On "Completing Installation"?

Feb 16, 2013

I am re installing Windows 7 on a Dell Inspiron laptop. I used the disc that came with the system. Everything went smooth and restarted a couple of times but once it got to "Completing installation", it's been stuck on it for about an hour. I'm assuming that's not right because I've installed Windows 7 numerous times. The green status bar on the bottom isn't moving at all if that helps. What should I do?

View 3 Replies View Related

Stuck On "completing Installation" On Windows 7 X64

May 11, 2010

Unplugging all USB devices that aren't needed. Updated Bios to the most recent version available and reset back to defaults. Double check that all essential hardware is compatible with 64 bit ( the documentation I've found says that all of my hardware is ok). Tried booting from DVD, burned at slowest speed. Tried booting from USB. Tried both 32 and 64 bit versions with the same results

why Windows hangs at the "completing installation" point?

View 9 Replies View Related

Monitor Blank Screen After Completing The Installation

Nov 29, 2009

I installed win 7 on my laptop. After completing the instalation, I started with update all drivers through device manager. When monitor software was finished with updating, monitor have had a black screen. There is no signs of life after many times of switching off the laptop on switch button.

I have tried to remove drivers in safe mode, but f8 or f10 on starting up does not run. Simply, screen is black, as it is no part of laptop.

Model of laptop is fujitsu siemens, model of monitor is samsung.

How can I resolve this?

View 3 Replies View Related

Windows 7 Pro, 32 Bit Stuck At Black Screen During Boot Up

Jun 26, 2012

When Win 7 pro (32 bits) boots up, as we all notice, there is a second or so when there is a black screen, w/ just your mouse cursor, and then you are supposed to see the blue Welcome screen.

In the past 2 months, my computer is stuck at that black screen about 7 times, as recent as tonight. I've done a clean install w/ the latest Nvidia driver 2 weeks ago. No change. It looks like win 7 Pro is stuck there and waiting for something as my hard drive light blink on and off.

So, I would do nothing, or sometimes I would disconnect the HDMI port connects to my 3rd PC Panel (see below), and I would wait for 5 min. or so. Then my login logo shows up, I click it, and I got to windows.

Now, w/ the normal boot up, I don't have that login logo, win 7 pro will simply boot up directly to win 7 main screen after I turn on the computer.

Some1 said this could be IRQ sensing problem of the video card. But so far, I have no proof on that 1 way or the other: All these started about 2 months ago, at or near the same time when the Sharp LED TV technician came to my house and upgraded all the firmware, including the firmware that consumers can't download, to my Sharp LED LCD TV, as the power button wasn't working.

Then in the past 2 mth., every time I turned on my LCD TV, which is connected to my computer as the 3rd screen via a DVI to HDMI cable, Win 7 senses this 3rd panel, and the screen went black and back on again. This isn't the way it used to be: as it WAS NOT SWITCH TO THE HDMI PC PORT.

My Sharp LCD has 4 HDMI output. Tonight for e.g., I was on Input 2, which is satellite, but as soon as I turn on the Sharp LCD, win 7 senses this 3rd screen, and the screen do that black screen then back on again w/ the music charm note.

This was not the way it used to be, in the past yr., w/ this same set up, win 7 only went to the black screen and back on when I switch to Input 1, which is PC at 1920x1080. And I don't know if the above is related to the boot up lock up or not.

View 5 Replies View Related

Pc Is Stuck At Black Screen

Dec 30, 2011

I just installed a new motherboard into my compaq preserio and when the computer starts up I am greeted with a black screen that says "loading operating system...". When I plug the original motherboard in I am greeted with a black screen, nothing happens after that. I have already installed the new motherboard's drivers but thats was when it crashed. I ran a diagnostic on it and it gave me error BIOHD 3, which I believe means that the drivers couldnt be found. So I am stuck at a stand still until I can find a fix.

View 2 Replies View Related

Windows 7 CD Boots / Files Loaded Then Stuck On Installation Screen

Apr 19, 2012

When I insert the disc and wait until the CD boots and the files loaded the installation screen appears and is just stuck. The mouse goes off and the keyboard is all so off. My configurations are Core i5 2400, 8GB ram

View 7 Replies View Related

Win 7 Stuck On Black Loading Screen

Jan 7, 2010

My computer after trying to (stupidly) remove the SPTD driver so Daemon Tools would work. Is stuck on the black loading screen, even when loading from safe mode.

I tried removing the sptd driver, but only took out 1 of 2 files, the other not being removed properly. So i restarted (which worked) and restored my computer to an hour before i tried any of it. I could only log on in safe mode and i checked and saw that both drivers were there. So i turn off the computer and it was fine.

However, i tried to turn on the computer again later, but it got stuck on the black screen with just the mouse. I held the power button and retried,in safe mode, this time getting to my computer background, with nothing loading. I tried yet again and only got black screen. It says all my drives loaded and everything, including sptd, but nothing is loading.

What is wrong with my computer? I am not that good with them and cannot open it up without a lot of help if it is a hardware problem

View 3 Replies View Related

Black Screen During Windows 7 Installation?

Dec 5, 2011

I tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know) anyways, everything goes fine until this screen: [URL] after that screen, my screen goes black and I can't do anything. it says nothing on my screen, just black.

View 2 Replies View Related

Black Screen During Windows 7 Installation?

Dec 5, 2011

I tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know)anyways,everything goes fine until this screen:URL] after that screen, my screen goes black and I can't do anything.it says nothing on my screen, just black.

View 5 Replies View Related

Stuck In Black Screen With Cursor Movement Only?

Oct 2, 2012

it started over a year ago when I started to get random BSOD messages, after no specific update, installation, or hardware change whatsoever.those usually included "IRQ_LESS_OR_EQUAL". usually after a crash it took some startup attempts to boot successfuly.

more recently crashes followed those BSOD's:
"BAD_POOL_CALLER"
"BAD_POOL_HEADER"
"BAD_SYSTEM_CONFIG_INFO"

since the latest crash, the computer is failing to start - after widows logo appears, I get a black screen with a cursor. NO control afterwards - Ctrl+Alt+Del doesn't work and I all I can do is restart.

I tried:

1. safe mode (all kinds) - still get the black screen with no response

2. low resolution video mode- same

3. Windows Restore, both from the boot options dialog and from the WIN7 installation disc boot - it doesn't run, I get an error message ("the application referenced memory......... .....memory can't be read" )

4. memory check, it ran but I cant access the results.

5. Windows system files checker ('sfc'), via the repair tools command prompt - it doesn't start, says there's a startup repair pending so startup - yet there isn't

6. reset BIOS settings - nothing before the current trouble, at times, I also tried:

- reinstalling drivers for Graphic card, Network card and motherboard
- cleaning dust in the CPU cooler
- fastening connectors
- clean format (that was a long time ago but blue screens appeared even shortly afterwards)

nothing worked....

specs:
cpu: Intel I7
motherboard: Asus P7H55-M PRO
Graphic card: PNY nVidia Quadro 580
Windows 7 pro

View 8 Replies View Related

Windows 7 Hangs Up On Completing Installation?

Feb 1, 2013

I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.

View 1 Replies View Related

Black Screen Soon After The Installation Of Windows 7 Homepremium?

Sep 25, 2012

I have been struggling with my old desktop for 4 hours...as i have installed a fresh windows 7 home premium on a new Samsung 500GB hardisk, but soon after the installation when i rebooted my pc it rebooted to black screen which is never ending....i have tried installing Windows 7 Os three times and every time the result was the same. my disk is ok as it doesn't give any error while running check disk utility on it.

View 1 Replies View Related

Notebook Stuck For 2 Minutes On Black Screen Before Booting Up

May 3, 2012

I have a dv7 notebook with Win 7 Home Premium installed on it. Everything is running fine, except a couple of days ago the notebook began to take too damn long to boot up when restarting or just when powering it on.

I noticed it gets "stuck" on a black screen, just like a blank DOS screen, for about 2 minutes before booting up Windows.

I have tried downloading new BIOS from HP website, resetting the BIOS settings, changing the boot order but nothing really works. It always stays on the black screen for around two minutes and then Windows boots up normally. No text is shown, nothing at all.

View 9 Replies View Related

Windows 7 Install On New HDD 'Completing Installation' Forever

Oct 26, 2012

Yesterday I bought a new hard drive. I went from a Western Digital Caviar Blue 500GB to a Western Digital Caviar Blue 1TB. So, same family of HDDs. I put in a burned Windows 7 install disc, and the process went okay until after the computer restarted and moved on to 'Completing Installation'. It just sits there. It doesn't freeze - I can move the mouse and there are three little dots after 'Completing Installation' that continue animating. I can also click the red X at the top-right but it says installation cannot be canceled at that point, which makes sense.I first let it sit on 'Completing Installation' for two hours. Then I turned my computer off, unplugged everything except for my mouse and keyboard, formatted the drive to get rid of any bad data, and tried again. After three hours of 'Completing Installation', I removed my video card, all but one stick of RAM, and entered the BIOS to see if there were any options relating to my hard drive. The only options I found were the options to choose a hard drive - I only have the one - and a couple of Plug and Play options. I restarted setup again, formatted again, and started the process over. Then I went to bed.

This morning, seven hours later, it was still sitting at 'Completing Installation'. I tried taking the install disc out to see if the install would stop or throw up an error, but it didn't make a peep. I took the install disc to my other computer to copy the data to a folder on the desktop, to see if there was an error. Everything copied fine. Plus, when I burned the DVD, I burned it at the lowest possible speed and had the program verify it. Everything came up fine.One thing I'll mention - when I start setup, I'm given an option to install a driver. I decided to choose that option just to see if it might provide any clarity. It then showed me the contents of my hard drive. Program Files was in there, My Documents was in there. So setup is doing something, it's just not finishing for some reason.

View 2 Replies View Related

Windows 7 32&64 Bit Won't Pass First Stage Of Completing Installation?

Jun 5, 2011

Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake

[code]...

Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.

View 9 Replies View Related

Windows 7 X64 Installation Error: Black Screen After Reboot

Jan 11, 2013

i have a MSI A6000 Laptop. Ive been trying to fix this problem for 2 day with 12 hours time and read countless forums but still haven't been able to solve it.

I recently encountered windows 7x64 installation error, where i could not select disk partition to install. ( i formatted and deleted all of the partitions for a clean install). But somehow after running the memory diagnosis i was able to go through the installation. But during the installation on the second time it restarts, my computer gets a black screen when starting.

i cannot access the post screen menu or the recovery option( it is however possible to access the same thing via booting through the USB and selecting the recovery option instead of installing). Also the memory diagnosis tool does not work any more giving an error. The bios options are as follows:

MAIN : Serial ATA [Hard Disk]
Serial ATA [ATAPI CDROM]
Advanced: PCI Latency timer [64]
Legacy USB support [enabled]
AHCI Mode [endabled]

View 1 Replies View Related

Black Screen With Mouse Pointer After Windows 7 Installation

Mar 15, 2010

installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.

View 7 Replies View Related

Black Screen On Installation Of Windows Professional Upgrade?

Jun 16, 2010

I've recently purchased a new ASUS computer (N61V I think), it came with Windows 7 Home, however for school the techies will only work with Windows 7 Professional, so thus, I cannot use it at the moment. I went through start, and went to "Windows Anytime Upgrade", purchased the Professional upgrade, confirmed, etc, etc. But for some reason my screen has gone black (I'm using another comp!) and the lights are flashing on and off. This has been happening for 2 hours now, and I'm not sure what to do. It's got a 500GB hard drive (around 470gb left) and I'm not sure why it's having such problems. Very strong internet connection - plugged in- and has been on charging.

View 4 Replies View Related

Whenever Live-Boot Or Windows Installation, Screen Goes Black

Sep 15, 2012

My system runs completely fine, but whenever I try to LiveBoot my screen goes black after about 5-10 minutes. Same goes with when I try to do a daily Windows Format/Installation and Safe Mode.

View 4 Replies View Related

Computer Stuck At Black Screen With Flashing White Underscore?

Oct 21, 2012

Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.

I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.

I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.

I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.

View 4 Replies View Related

Driver Installation Screen Gets Stuck On Please Wait...

Jun 4, 2012

It really sucks because it's a driver that, when not installed, causes me to crash all the time! I've already tried disabling Windows Security Essentials' Real-Time Protection.

View 3 Replies View Related

Windows 7 Ultimate (64-bit) Install Fails At Completing Installation?

Feb 9, 2010

So I have searched around and none of the solutions worked, but let me get to the basics:

DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram

Hard drives:

Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB

Maxtor 120 GB IDE drive (the other 2 are both SATA drives)

Sony DVD R/RW Drive
using onboard audio

Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.

View 9 Replies View Related

Windows 7 X64 Fresh Install On SSD Rebooting On 'completing Installation'?

Mar 10, 2012

I seem to be having an issue doing a fresh install of Windows 7 x64 Enterprise on a 40GB Intel 320 series SSD. The install will go as far as 'Completing Installation' before the screen goes blank, the computer restarts, makes another attempt to complete installation, with the screen eventually going blank again (monitor indicator turns amber, system non-engaged)I've done an extensive amount of Googling, and have followed the installation guide found here on the sevenforums - SSD / HDD : Optimize for Windows Reinstallation (specifically, routine #4)[CODE]

View 3 Replies View Related

Black Screen After Windows 7 Beta X64 Build 7600 Installation

Jul 28, 2009

I'm installing Windows 7 Beta x64 Build 7600 with a 4.7GB DVD but once it gets to the 'finishing installation' part it seemingly reboots (I think?) to continue with the install but the thing is at this point in time for me the screen goes blank and all I see is the cursor which I can move around. If I power it off and then turn it back on the loading screen comes up but when I get to the log on screen the same thing happens again.

The exact same thing happens to me with Vista. I installed it like three times (the difference is on Vista it gets past the install but still won't get past the logon screen so I can never shut down, restarting is fine though for some reason) and I'm being forced to roll back to 64-bit XP which to be honest I really don't want. So far I've detected that it's not the DVDs. It might be the RAM but I replaced both temporarily and that didn't work either.

View 9 Replies View Related

Computer Stuck On Black Screen - Wont Start In Safe Mode?

Feb 13, 2011

Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.

View 2 Replies View Related

Sudden Reboot (Windows 7 64bit) After Installation Complete & Black Screen?

Jun 3, 2011

I have problems entering windows after the first installation of Windows 7 64 bit built 7000.After seconds the welcome (splash) screen appears, the windows suddenly reboot automaticaly.After that, black screen appears with dashes blinking.(Actually, my current OS is Windows 7 32 bit built 7600, but I think it isn't cause of the problems. I have formatted the local drive, in which my current OS was installed, before I install Win 7 64 bit).

View 2 Replies View Related

Black Screen Near The End Of Installation

Oct 27, 2009

I am currently using Vista Home Premium SP1, with a Nvidia GTX 295 and Intel Core i7 920. I purchased the Windows 7 Home Premium upgrade disc yesterday.

Near the end of the installation it does one of its usual auto-restarts. After the Windows 7 loading screen finishes, all i can see is a black screen with a mouse pointer, thats it. Then if i restart it takes me to a screen that says "your upgrade failed, restoring your previous version of Windows". I have tried every hint i can find, 9 installs later, and still no closer to finishing.

View 1 Replies View Related

Black Screen With Installation

Oct 28, 2009

I am trying to do an upgrade with a computer I previously had Vista Ultimate on. I choose to do a clean install and formatted the hard drive with the 7 installer. The installation begins normally, but when it reboots and says "Starting Windows" a black screen comes up. I am able to see the mouse cursor and mode it, but nothing else occurs.

The hard drive light comes on periodically, but nothing happens even if I leave it sitting for several hours. If I restart the computer, it gives me the option to start in safe mode, then says 7 can not load in safe mode and reboots to the same black screen.

I have tried installing multiple times with the same result. I re-loaded Vista and tried to do an upgrade, but it tells me Vista Ultimate can not be upgraded to 7 Home Premium and I must do a clean install.

The upgrade advisor told me I should have no issues and Vista ran fine.

Any ideas what could be causing this black screen upon installation?

View 5 Replies View Related

Black Screen During Installation

Jan 3, 2010

DVD disc boots up, Windows loading files...then Microsof Corporation loading screen comes up, and after that black screen, and nothing happens, everything is working but nothing happens. Tryed several times, but still the same thing happens. Any suggestions?

View 9 Replies View Related

Screen Goes Black During Installation?

Feb 27, 2010

I got Windows Seven PRO 64bit today

I get it to boot from the DVD and it gets all the way to the final step {Completing Installation} then the screen goes black and hasnt moved from it for like 2-3hrs..

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved