DVD disc boots up, Windows loading files...then Microsof Corporation loading screen comes up, and after that black screen, and nothing happens, everything is working but nothing happens. Tryed several times, but still the same thing happens. Any suggestions?
View 9 RepliesI am currently using Vista Home Premium SP1, with a Nvidia GTX 295 and Intel Core i7 920. I purchased the Windows 7 Home Premium upgrade disc yesterday.
Near the end of the installation it does one of its usual auto-restarts. After the Windows 7 loading screen finishes, all i can see is a black screen with a mouse pointer, thats it. Then if i restart it takes me to a screen that says "your upgrade failed, restoring your previous version of Windows". I have tried every hint i can find, 9 installs later, and still no closer to finishing.
I am trying to do an upgrade with a computer I previously had Vista Ultimate on. I choose to do a clean install and formatted the hard drive with the 7 installer. The installation begins normally, but when it reboots and says "Starting Windows" a black screen comes up. I am able to see the mouse cursor and mode it, but nothing else occurs.
The hard drive light comes on periodically, but nothing happens even if I leave it sitting for several hours. If I restart the computer, it gives me the option to start in safe mode, then says 7 can not load in safe mode and reboots to the same black screen.
I have tried installing multiple times with the same result. I re-loaded Vista and tried to do an upgrade, but it tells me Vista Ultimate can not be upgraded to 7 Home Premium and I must do a clean install.
The upgrade advisor told me I should have no issues and Vista ran fine.
Any ideas what could be causing this black screen upon installation?
I got Windows Seven PRO 64bit today
I get it to boot from the DVD and it gets all the way to the final step {Completing Installation} then the screen goes black and hasnt moved from it for like 2-3hrs..
I tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know) anyways, everything goes fine until this screen: [URL] after that screen, my screen goes black and I can't do anything. it says nothing on my screen, just black.
View 2 Replies View RelatedI tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know)anyways,everything goes fine until this screen:URL] after that screen, my screen goes black and I can't do anything.it says nothing on my screen, just black.
View 5 Replies View RelatedI thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
My problem is that during Windows 7 Ultimate installation (right after the first reboot) the screen goes black! The monitor does not loose the signal because I can still see the green solid LED on it. I have run into this issue four times with four different PCs with four different configurations. The only common denominator here is the type of video card (I say the type of video card because this has happened with different brands and models of video cards). This has happened only with video cards that have DVI, S-Video and VGA ports, but only on the ones that have the VGA port that PLUGS through a little ribbon cable to the card it self. I have successfully installed Windows 7 on systems that have video cards with the same ports but the VGA port is solder to the card. It seems that after the first reboot and after it displays "Starting Windows", Windows thinks that the active port on the video card is the DVI port and NOT the VGA port that has been using up until that point! I know this because I have used a DVI to VGA adapter right after the screen goes black and there it is! the setup process waiting for my input (create a user)...
View 5 Replies View Relatedi have recently ordered a lappy ASUS K53SV-SX520D from flipkart. the specifications are i5 second Generation processor. it came preinstalled DOS. i tried to install the windows 7 ultimate 32 bit. and i installed successfully. But some problem arose i guess the reason is that i created 3 partitions while installations and from Disk Management i created another volume. of the remaining unallocated space.now when i started the lappy m not able to BOOT. its just the blank screen with a blinking curser. i have tried many times but failed. peoplesolve this problem. its a new laptop and m no even able to start it even once.secondly. someone suggested me to delete the partitions while instaling the Win 7 again. i tried that too.. but all the options to delete, format, new, are in gray. i mean m not able to delete those 4 partitions.
View 1 Replies View RelatedI have been struggling with my old desktop for 4 hours...as i have installed a fresh windows 7 home premium on a new Samsung 500GB hardisk, but soon after the installation when i rebooted my pc it rebooted to black screen which is never ending....i have tried installing Windows 7 Os three times and every time the result was the same. my disk is ok as it doesn't give any error while running check disk utility on it.
View 1 Replies View RelatedI need some help with my Windows 7 installation.
I've finally installed the RC build (7100 x64) on my Samsung SA11 notebook,
but after the installation of the latest nVidia drivers available for my card
I only get a black screen after I restart the PC. Any ideas?
Have Windows 7 on my laptop and it's been working OK so far. When my WinXP install on my desktop started acting wonky and refused to launch except in safe mode, I figured I'd go ahead and trade up to Windows 7 since I'm a student and can get a copy for $20.I pulled all the data I wanted onto a USB drive, then started installing. Did a clean custom install; deleted both previous partitions and made a single new partition for it to install on (plus the mandatory 100MB partition). It chugged along and seemed to be progressing nicely: Copying files... check. Expanding files... check. Installing features... check. Installing updates... check. Completing installation... VIDEO MODE NOT SUPPORTED. Suddenly my monitor doesn't understand the output it's getting. The system doesn't see the keyboard either: caps lock & num lock buttons don't toggle their associated lights. So I gave it an hour. Still nothing. I figured it must have locked up, so I power-cycled it, hoping it had completed the installation. No such luck, I get an error message saying the installation ended unexpectedly and I have to restart. So I restart. Same thing happens.
During the portion of the install just before the final reboot, while it says, "Completing installation..." the screen goes black to show a single blinking cursor in the top left for a second or so (like it kicked out of the OS), then goes black & says video mode not supported, like its receiving invalid input from the computer. I connected another monitor and instead of saying video mode not supported, it just shows a black screen, like its getting good output from the computer but the computer just wants to show all black (this monitor does have a 'video mode not supported' equivalent screen, which it's not using in this case; that's why I think it's getting good output from the PC). I know the system isn't reaching the actual reboot, because it doesn't do the 10-second countdown before automatically rebooting, it just jumps straight to the black screen.
Machine Stats Processor is a 3.0GHz Core 2 Duo. Has 2GB of RAM. GPU is an Nvidia 8800 GT. Monitor is a Dell 2007WFPb. Disc I'm installing from says "Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media".
Current Things to Try Install WinXP and give Upgrade Advisor a shot. Current Operating System, pre-install- Never multi-booted before, not planning to start now. Current Hardware- 1 SATA hard drive- 1 SATA DVD drive- 1 USB external drive, but not connected during install- Didn't see any disks with an exclamation point or yellow triangle - Not a new HD; as I said, it's one I was using before, I deleted the two partitions I was using with WinXP, made a single new partition (plus the mandatory 100MB one), and formatted the new one using the installer's Disk Manager Windows 7 installation details - Disc says Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media ... I saw on various forums before I started that Upgrade versions could do clean new installs as well - 32 bit (x86) version - Bought a legit DVDInstallation Media- From a DVDThe procedure and speed of burning the ISO to DVD has been the most frequent cause of installation failure- Bought itOther- No overclocking?
So i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
i have a MSI A6000 Laptop. Ive been trying to fix this problem for 2 day with 12 hours time and read countless forums but still haven't been able to solve it.
I recently encountered windows 7x64 installation error, where i could not select disk partition to install. ( i formatted and deleted all of the partitions for a clean install). But somehow after running the memory diagnosis i was able to go through the installation. But during the installation on the second time it restarts, my computer gets a black screen when starting.
i cannot access the post screen menu or the recovery option( it is however possible to access the same thing via booting through the USB and selecting the recovery option instead of installing). Also the memory diagnosis tool does not work any more giving an error. The bios options are as follows:
MAIN : Serial ATA [Hard Disk]
Serial ATA [ATAPI CDROM]
Advanced: PCI Latency timer [64]
Legacy USB support [enabled]
AHCI Mode [endabled]
installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.
View 7 Replies View RelatedI've recently purchased a new ASUS computer (N61V I think), it came with Windows 7 Home, however for school the techies will only work with Windows 7 Professional, so thus, I cannot use it at the moment. I went through start, and went to "Windows Anytime Upgrade", purchased the Professional upgrade, confirmed, etc, etc. But for some reason my screen has gone black (I'm using another comp!) and the lights are flashing on and off. This has been happening for 2 hours now, and I'm not sure what to do. It's got a 500GB hard drive (around 470gb left) and I'm not sure why it's having such problems. Very strong internet connection - plugged in- and has been on charging.
View 4 Replies View RelatedMy system runs completely fine, but whenever I try to LiveBoot my screen goes black after about 5-10 minutes. Same goes with when I try to do a daily Windows Format/Installation and Safe Mode.
View 4 Replies View Relatedi got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU
Nvidia GeForce 7800 or smthng 512mb
4GB ram
2x120GB WD HDz
I'm installing Windows 7 Beta x64 Build 7600 with a 4.7GB DVD but once it gets to the 'finishing installation' part it seemingly reboots (I think?) to continue with the install but the thing is at this point in time for me the screen goes blank and all I see is the cursor which I can move around. If I power it off and then turn it back on the loading screen comes up but when I get to the log on screen the same thing happens again.
The exact same thing happens to me with Vista. I installed it like three times (the difference is on Vista it gets past the install but still won't get past the logon screen so I can never shut down, restarting is fine though for some reason) and I'm being forced to roll back to 64-bit XP which to be honest I really don't want. So far I've detected that it's not the DVDs. It might be the RAM but I replaced both temporarily and that didn't work either.
I have problems entering windows after the first installation of Windows 7 64 bit built 7000.After seconds the welcome (splash) screen appears, the windows suddenly reboot automaticaly.After that, black screen appears with dashes blinking.(Actually, my current OS is Windows 7 32 bit built 7600, but I think it isn't cause of the problems. I have formatted the local drive, in which my current OS was installed, before I install Win 7 64 bit).
View 2 Replies View RelatedMy wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View Relatedthe other day i got my computer together and started installing Windows 7 and when i hade rebooted and were on the final step it suddenly appeard white squares all over the screen and then it got black :S have been waiting like 3-4h now, anyone have a solution to my problem I heard that it could be bad ram so i took out one of em and installed Windows 7 again but I had the same problem again. then I took out the one that was there and put in the other one but same thing happend , is both broken or is it maybe something else ?Processor : intel i7 860Grafikkort : Geforce 9800gtx +moderkort gigabyte GA-P55A-UD4 P55 S-1156 ATX
View 9 Replies View RelatedMy son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedI'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.