When Reboot, The Screen Eventually Goes To A Black Screen Saying "Windows 7 Failed To Start?

May 12, 2012

My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.

If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.

View 9 Replies


ADVERTISEMENT

Black Screen After Login With Movable Cursor. Eventually Works Correct?

Aug 29, 2012

My computer loads normally to the login screen. I enter my password and press enter.It displays the welcome message with the spinning circle thing, and seems to load correctly. When finished, it is at this point my screen goes black showing only the cursor which I can move. When I hover over where the taskbar should be, the screen dims a bit. When I move away from the 'invisible' taskbar, the screen brightens to it's original state. This leads me to believe that the desktop may be loaded, but for some reason is not displaying. After about a minute, everything displays and the computer works perfectly. Occasionally, there is not an issue, and the desktop loads perfectly, seconds after logging in.

View 5 Replies View Related

Black Screen After Windows Start Up Doesn't Go To Login Screen

Nov 12, 2011

I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.

View 1 Replies View Related

Windows 7 X64 Installation Error: Black Screen After Reboot

Jan 11, 2013

i have a MSI A6000 Laptop. Ive been trying to fix this problem for 2 day with 12 hours time and read countless forums but still haven't been able to solve it.

I recently encountered windows 7x64 installation error, where i could not select disk partition to install. ( i formatted and deleted all of the partitions for a clean install). But somehow after running the memory diagnosis i was able to go through the installation. But during the installation on the second time it restarts, my computer gets a black screen when starting.

i cannot access the post screen menu or the recovery option( it is however possible to access the same thing via booting through the USB and selecting the recovery option instead of installing). Also the memory diagnosis tool does not work any more giving an error. The bios options are as follows:

MAIN : Serial ATA [Hard Disk]
Serial ATA [ATAPI CDROM]
Advanced: PCI Latency timer [64]
Legacy USB support [enabled]
AHCI Mode [endabled]

View 1 Replies View Related

Windows Profile Deleted After Black Screen / Reboot

Jan 14, 2012

After installing 2 new GPU's i tried to run a game when suddenly my screen turned black. I rebooted my pc, logged into my normal account and everything was changed to basic ( like you just installed windows 7 ). A small thing popped up saying: User profile has been damaged. You are now using a temporary profile. ( Files that have been installed will be removed after the system has been shut off )I went to my User profile file and tried open it, but a messages popped up saying: C/Users/Jens Cannot be opened.File has been damaged and cannot be opened.Ive been searching on google, but i havent found anything to fix this.

View 5 Replies View Related

Run WEI And Getting Black Screen Until Reboot?

Sep 8, 2012

So I thought I had a problem with my graphics card or display as whenever the computer went to sleep the screen would not come back on unless I reboot. Since then I have done testing and the sleep mode works fine, but it was actually when I was trying to run WEI. It starts off okay but then goes to a black screen after a few moments and won't come back on

View 3 Replies View Related

Sudden Reboot (Windows 7 64bit) After Installation Complete & Black Screen?

Jun 3, 2011

I have problems entering windows after the first installation of Windows 7 64 bit built 7000.After seconds the welcome (splash) screen appears, the windows suddenly reboot automaticaly.After that, black screen appears with dashes blinking.(Actually, my current OS is Windows 7 32 bit built 7600, but I think it isn't cause of the problems. I have formatted the local drive, in which my current OS was installed, before I install Win 7 64 bit).

View 2 Replies View Related

Black Screen Of Death And Reboot

Feb 26, 2010

i got to experience black screen of death and reboot my system. I have had my computer for less then 2 weeks and could take it back to best buy. Should i do that or is it going to be good as new? is it all win 7?

View 2 Replies View Related

Screen Says Windows Failed To Start

Mar 9, 2011

have just started running a factory setting reboot got to 68% complete when we had a power cut, now when switched the lap top back on the screen says windows failed to start it says to install the windows disc and restart you comp put windows seven is installed in the laptop i when i brought the lap top it didnt have a disc the laptop is a emachine 627 running 64bit version the status 0xc000000f comes up.

View 2 Replies View Related

GTX580 Black Screen/Reboot In Games, Windows Logo, Even At Bios Load

Jun 9, 2012

I purchased a system with dual GTX580's about a year and a half ago. I have had issues with system crashes (lockups, no blue screen, and no alt-tabbing out of them) almost from the beginning. Since I am impressed with some of the technical responses I have seen on threads in this forum, thought I'd reach out for help before I pull what hair I have left out.....

I tried literally every different bios update available, every single driver release Nvidia has released, too many clean windows installs to count, MSI Afterburner/EVGA Precision (video voltage increases, clock decreases (removing EVGA superclocking), replaced the SLI bridge, different ram, different powersupply cables, different fan speeds, and so many other things over the past 1.5 years it's rediculous.

In preparation for trashing the cards, I pulled them out and put my old cards back in. These are also EVGA brand, 8800's, also can run them in SLI with the same bridge, and not a single problem. This is while running the same driver release (clean install though) as the 580's.

So I put one 580 back in, both slots 1 & 3, and to my surprise it worked just fine in either PCI slot. Tried the other 580, also works fine when alone. Put them both in, put the bridge on, and it crashes right after Bios loads, before it even makes it to the windows logo/login screen.

Seems to have gotten worse over time (was just during intense gaming, next it's when in windows but not gaiming, sometimes at the Windows loading Logo, and sometimes even at bios load.)

Overheating? Temps are fine..even when stress testing with Kombuster/Furmark/Prime95/MEMTest/etc. temps get warm, up to 85 on CPU cores, and 75 on video card, but all tests are fine.

View 9 Replies View Related

After First Reboot, Black Screen With Scattered Alt Characters?

Oct 31, 2012

Laptop: Toshiba satellite C660 12 I simply used "Windows 7 USB/DVD" to burn ISO Windows 7 (64 bit/ 32 bit - Both versions contained in the same ISO file) to a DVD disc and to a USB Flash.Before installation, I used "MiniTool� Partition Wizard" ISO bootable version (I burned it to CD), And format all drives (So, there is no OS installed after formatting).I format all drives to NFTS format, I set one drive as primary and set it active. So there is no problem with formatting. My computer now is clear.I started installing Windows from the USB Flash, It it started normally, and go through the steps up to the window titled "Install Windows" which contains this Text: ..... Installing Windows That's all the information we need right now. Your computer will restart several times during installation

Copying Windows files
Expanding Windows files
Installing features
installing updates
Completing installation

This Window completed successfully, and prepared to reboot. After reboot it displays a black screen with scattered alt characters. the characters has no specific order. A blinking cursor after the last line........ Just reference to alt charachters: 1, 2 That black screen (with characters) remain without any change, I wait for 15 minutes but no thing happened, I press many keys but no response even Alt+Ctrl+Delete for reboot. I tried booting and installing it again but from the DVD disc, the same scenario happened.

(Edit) Update:It seems that after the first reboot the screen shown is the same as the screen when choosing HDD/SSD Toshiba MK3265GSXW (instead of booting from USB or DVD)

View 1 Replies View Related

Clean Install Last Reboot Goes Into Black Screen / White Blinking

Dec 7, 2011

So, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.

View 8 Replies View Related

Black Screen 'reboot And Select Proper Boot Device'

Aug 17, 2012

I recently ordered a desktop online with win 7-asus m5a88-m mb, amd fx 4100 bulldozer quad core processor with a wd 1 terabyte hd. I put in my own radeon r6750 core edition grphix card. This pc ran amazingly for approx. 2 months. Then all of the sudden upon cold start only, makes a loud humming, it goes to black screen with the words "REBOOT AND SELECT PROPER BOOT DEVICE OR INSERT BOOT MEDIA IN SELECTED BOOT DEVICE PRESS ANY KEY." Then the humming subsides,i turn it off and right back on and runs fantastic. It does this everyday. Things i have tried: got to bios and change priority order to hd first, replace hd, sent back to company and it was fixed for 2 days and doing it again. I should also mention that they completely reloaded windows and replaced the ram.

View 14 Replies View Related

Windows 7 Won't Start Up And Gives A Black Screen?

Dec 15, 2012

my hp notebook has a black screen with a white curser. i have tried a recovery disc, running a system diagnostic which tells me it all passed, i have tried a hard reset, and my safe mode wont come up.

View 1 Replies View Related

Black Screen And Cannot Start Windows?

Oct 24, 2012

I was about to use my friends new ASUS laptop this morning, and soon the Windows update started. But after a while, the battery was out because the plug was not connected. So that I restarted. But this time normal windows 7 looked like started with comment updating something. But it took very long time and next time when I looked at it, it was just black screen.After that I shut it down and restarted. But nothing happened on the screen. I tried to press Alt+F10 at the same time, but didn't work.

View 3 Replies View Related

Black Screen After Windows 7 Pro Start Up

Oct 1, 2010

My Dell laptop won't load past the windows start up screen.. then goes black sometimes with cursor, sometimes without. F8 does not work, safe mode with networking will not come up.

View 5 Replies View Related

Failed BIOS Update, HP PavilionG6 Won't Boot Up And Only Black Screen

Jun 2, 2012

I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.

I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.

View 4 Replies View Related

Computer Screen Goes Black When Trying To Start Windows?

Oct 10, 2012

My friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..

View 3 Replies View Related

Windows Dont Start, Black Screen

Feb 8, 2012

I relocated my 500gb hdd to insite. Before i had it as exernal hdd. But i get black screen when i start my pc. I get even if i remove it.in black screen here is also flashing "_". When i installed Windows 7 i didnt have it coneted witht pc. Sorry if here is some miss spells using mobile to write.

View 5 Replies View Related

Black Screen And Two Windows 7 To Choose To Start-up?

Jul 19, 2010

When I start up my computer I have a black screen show up.... I then have to choose between two windows 7 which are highlighted....

I can enter down and go to safe mode or other options. I do not know why this is happening on each start-up.

I think perhaps there are still two copies of the windows 7 Operating system on the computer. I had to do a reinstall and I assume one was not removed.

View 6 Replies View Related

Computer Has A Black Screen And Show "reboot And Selectproper Bootdevice Or Inse

Apr 7, 2011

I disable the SATA in window 7 after that i am trying to open window but the message "reboot and selectproper bootdevice or insert boot media in selected boot device and press key" is diplay. setup also not open

View 1 Replies View Related

Black Screen But Cursor After Crash, After Windows Start Animation

Feb 24, 2012

my system crashed yesterday due to gpu overheating. now it boots till windows animated logo but at the point right when welcome screen usually comes there is nothing now but a moveable mouse cursor on a completelly black background.now i have following stuff to get back to normal: two very old restore points and a recently created macrium reflect system image but no repair disc. i will be very happy, if there is a way to use the image since i know that some of you prefer macrium reflect insted of microsofts system image solution. unfurtuntelly my restauration points are way to old (april 2011).

View 7 Replies View Related

Windows 7 Black Screen Appearing Withing A Minute Of Start Up?

Mar 11, 2012

My promblem is, I shut down my computer earlier in the afternoon yesterday. I come back and turn it on and after running a minute or two, the fans are going like crazy and screen goes black, monitor goes to sleep. I manually hold down the power button, restart and choose the option to repair. Once again, after a minute or so fans start running hard, blacked out screen, monitor goes to sleep.My husband has tried F8 and we've tried going back to a restore point. It will start and sound normal, but when the fans start to run hard we know the screen will go black.Opinions from various people I know and from websites are stating it's my ATI Radeon graphics card. We've even tested the RAM, yet within those two minutes after start up, monitor goes black and states no signal or it's sleeping. We've also tried numerous monitors, just for sake of process of elimination.

View 6 Replies View Related

Nothing But Black Screen On Start Up?

Jun 10, 2012

Nothing but black screen on start up?

View 1 Replies View Related

Freezing Was Screen And Now Black After Start Up

Jul 9, 2012

I have a samsung R700 laptop, which decided this morning to die. I had downloaded some films last night (which I have done many times with no problems previously), switched off the laptop (which rarely do - prefering instead to hibernate.) When I switched it back on this morning, windows was carrying out about a million updates. After around 10 minutes, the screen came on, and everything looked normal. I tried to open a document, but the laptop screen froze, and although the curser was there and moving, I was unable to close or open any other pages/applications. After restarting a few times and having the same thing happen, I started in safemode, restored it back to last month, and tried again. In safemode I can scan (have used 3 virus scanners which have been reccomended) but all results are clear. I can access the internet and all of my documents. Restarted the machine after an hour switched off, and when booting up in normal mode, the home screen is just black. There is a white cursor which moves, but no taskbar or icons etc. Safe mode is still functional.

View 10 Replies View Related

Black Screen At Start Up For 10 Secs

Nov 6, 2009

I have just put 64bit 7 on my pc after having 32bit 7 on it and I have noticed after the starting windows orb goes the screen turns blank for 10 secs then tarts allot slower than it use to on 32bit and 32bit never had that problem is there a way to stop this from happening?

View 0 Replies View Related

Black Screen With Cursor On Start Up?

Dec 19, 2012

im having this problem on my acer 4741g laptop recently. Upon start up im having this black screen with cursor for about 10-15minutes until in boots up to normal start up display, i also observed that after the black screen in boots up very slow. This only happens when i shut down or restart my system otherwise this problem dont show up.I already did some troubleshooting including start up repair, adjusting my resolution and system recovery but still cant fix the problem.

View 5 Replies View Related

No Logo Or Start Up Screen, Just Black

Dec 2, 2012

Recently i updated my M17x R2 laptop,windows 7, ati 4870x2 graphics, 2 x 320GB hard drives,and all of a sudden little blue screen came up, all i had time to read was something about video drivers update,then computer shut down,now when i start up all i get is black screen,nothing else not even logo screen,i am certain this is not hardware problem as everything has been running perfectly,its something to do with the updates,unfotunately cd/dvd drive is broken so my only option is to do something through USB,only problem with that is i cant get into bios F2 or boot menu F12 to change boot order because screen black,so i need something on USB that will overide the bios/boot,also tried pressing F8 and nothing,but when i do start up everything sounds fine,fans,cpu,its just screen

View 3 Replies View Related

Black Screen And Cursor At Start Up?

Dec 19, 2012

Im having an issue with my computer. I was playing on my computer yesturday and everything was fine until this morning when i turned it on. At first, it would log into windows but everything was slow, windows security center services was off (coulnd turn it back on), i coulnd open firefox. I then started it up in safe mode and ran Avast full scan (nothing found), ccleaner, and malwarebytes (nothing found)I then tried to restart it in normal mode and now i got a black screen with a movable cursor after welcome screen.

View 15 Replies View Related

Laptop Will Not Start / Black Screen With Cursor?

Feb 16, 2012

Black Screen with cursor? When I switch my laptop on it comes up with a black screen with just the cursor in the top left, this happens before I get to any login screens etc, It's like its wanting to boot a CD but there;s no CD/DVD in the rom! Even when I have put one in, it still hasn't worked..I've looked on lots of forums but none have helped. The only thing that works is F2 that takes me to InsydeH20 Setup Utility & F12 Boot menu.But they dont help! I've tried the usual F8 for safe mode but no such luck, nothing happens, still the same black screen with cursor!

View 2 Replies View Related

Did A System Restore / Now Get A Black Screen When Start Pc

Jan 13, 2012

At first it started with me downloading Cataclyst Control Center to update my graphics card wich is a X-fire ATI 5000 series. There apeared a black border around my screen of around 1 inch, but wherever I chekked the resolution showed it was my native 1920x1080, while still showing the black border.I tried de-installing CCC at that point but it didn't work, I also tried a system restore, but that didn't work either. I formatted my pc to factory defaults at that point.After a month I started using the pc again, and when playing Battlefield 3 I got an error that my graphocs card was failing or something. So this time I went to the device manager and tired updating it there, but it automaticly installed CCC again and my resolution got screwed again.I found a solution from: [Solved] 4870 not displaying 1920x1080 on Acer H233H - ATI - Graphic-Displays."I just went through this myself with an Acer P235H. The problem has nothing to do with Acer, and everything to do with ATI. You see, ATI assumes that you'll use your HDMI cable to hook up to a TV. Since most TVs are configured with overscan (i.e. the edges of the broadcasted image don't appear), ATI aggressively defaults to shrinking the image by 15% when using HDMI to ensure that the entire desktop will be visible.

The solution is to install the ATI Catalyst Control Center, available from their website. There's a section called something like "desktops & displays." On the bottom of that tab will be an area with a small icon of a monitor. Right click on that and select "Configure..." One of the tabs that shows up has a slider for display scaling. Move the slider to 0%, and voila! It was for my wife's computer. I had already promised to reduce the cable clutter by having a single thin cable for both audio and video, so not getting HDMI working would have entailed a serious loss of face."So I tried looking in the CCC, but found no such option, and then went to the website to update CCC. I got the latest version, and again found no such option. I chose to do a system restore and never again try to update my drivers for the sake of having a normal screen.When the restore was finished it automaticly restarted my pc, and I got to the password screen (with normal resolution now) and typed in my password, after that I got a blackish screen with only my mouse on it, wich I could still move.I restared my pc again then and this time I didnt even get to the password screen, it just straight out went to the blackish screen with my mouse on it after the welcome screen.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved