Black Screen After Login With Movable Cursor. Eventually Works Correct?
Aug 29, 2012
My computer loads normally to the login screen. I enter my password and press enter.It displays the welcome message with the spinning circle thing, and seems to load correctly. When finished, it is at this point my screen goes black showing only the cursor which I can move. When I hover over where the taskbar should be, the screen dims a bit. When I move away from the 'invisible' taskbar, the screen brightens to it's original state. This leads me to believe that the desktop may be loaded, but for some reason is not displaying. After about a minute, everything displays and the computer works perfectly. Occasionally, there is not an issue, and the desktop loads perfectly, seconds after logging in.
View 5 Replies
ADVERTISEMENT
Jan 14, 2013
Just today i read a post stating that java has a bad virus. Know that i ran a malwarebites scan and it found 1 harmful item and i deleted the item. After restarting my computer from a prompt, my lenova v570 laptop now turns on with a black screen and a movable cursor right after the windows "welcome screen".
ctrl + alt + delete does not work
I have tried in safe mode and it turns on properly. So, i tried to do what others sujjested on other forums, which was to " roll back my graphics driver" after that, nothing has change.
View 6 Replies
View Related
Jun 16, 2012
its 1 year 7 months old it starts goes to windows error recovery after choosing start windows normally it then goes to black screen and moveable cursor
View 2 Replies
View Related
Feb 25, 2012
Whenever I boot Windows 7, after it starts, instead of showing the login screen, it show a black screen with a movable cursor. Now, I can go into safe mode, and it works, but, hell, I can even put my password on that black screen, press enter and it will go into Windows and work just fine. But the thing is, it's supposed to show the login screen, not just a black one, so I'm a bit worried of what might be causing the problem, and whether or not it could expand into something worse.
View 2 Replies
View Related
Jul 26, 2012
Firstly I'm on Windows 7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Windows 7 GUI would load just fine and there I would be.
I restarted my PC at 5AM this morning and it did the same. All I did at that point was send an e-mail via Gmail and shut it down again. At 2PM I went to startup my PC and everything went as usual except the PC never left that black screen with the responsive cursor.
I searched here and found that problem many times, but with one difference-- my PC starts fine in Safe Mode.
I used Advanced System Care to fix some registry errors and am currently running a Malwarebytes full scan.
It might be worth noting that I recently installed Batman: Arkham Asylum and as it was frequently crashing, followed some advice to enable everything at startup, which I did, fixing my game problem. That was around the time the black screen first started showing up, and I assumed it was a result of more things taking place during Windows startup.
View 1 Replies
View Related
Jan 4, 2012
All right so first I'll give some of the basic specs of my system. I have the following hardware:
Phenom II x4 955 CPU
ASRock 870 Extreme 3 motherboard
Corsair vengeance 8gb RAM
An 850 OCZ PSU
a HDRadeon 6870 GPU
and a basic optical drive
Also, I am running Windows 7 Ultimate 64 bit OS
A while ago, my brother was playing some hardcore HoN on my computer. When the game ended, the screen turned black and i was forced to restart the entire thing. I get past the windows logo just fine and even hear the "welcome" sound as the OS starts up. Then, nothing. The screen just turns black with nothing but the cursor. I am able to move it around and everything but cannot do anything. Ctrl-alt-del doesnt work either.
So, i restarted again and this time went into safe mode and tried to check things out. I updated my graphics drivers (which were in no need of an update) and then restarted it again. Still nothing! I tried this multiple times, uninstalling, reinstalling, took a break. When I came back, I decided to boot from the disc and start afresh. I went through the process of setting up the OS and all the motherboard drivers (and the GPU drivers)...
I was able to login and download firefox and a couple of other security programs. I thought I had done enough and windows needed to be restarted to finish its update so I decided to restart again... The same black screen with the cursor! I have tried everything I know and I don't want to be stuck in safe mode forever!
View 7 Replies
View Related
Jun 21, 2012
I have a Dell Inspiron, not always but sometimes on start up it restarts to a black screen with a white cursor. Safe mode does work.I don't know why it sometimes does this or what makes it stop. I have tried just letting it try to load up for as long as an hour with no change, sometimes restarting has fixed it but sometimes (like now, it has done nothing no matter how many times I've tried).
View 5 Replies
View Related
Nov 6, 2012
I'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
View 2 Replies
View Related
Oct 4, 2012
I got a bad virus on my computer about a week ago. I decided to use my windows 7 installation disc to reformat my disk drives and reinstall windows 7. The installation goes smoothly and I am able to login to windows. But after I install drivers and updates, then restart the computer, I get the "starting windows" screen with the swirling logo. I can hear the chimes that sound when I get to the login screen, but the screen is black. I can make the cursor appear by moving the mouse, but I cant do anything else. I never created a system restore disc, so I dont have that to help me.I have done some tinkering and will tell you what did not work so far.First, like I said, I used the windows 7 install disc to reformat my disk drives. Then, I reinstalled windows. I installed the updates for my graphics card and motherboard. When I restarted, I got the black screen. I restarted the computer and used F8 to do a system repair. This detects no problems. I tried to use the "startup repair" on the windows installation disc. This does not recognize a problem. I have tried it several times. Same result. Next, I tried to use the repair options on the windows install disc. I went to command prompt and typed in: bootrec.exe /fixmbr, bootrec.exe /fixboot, and bootrec.exe /RebuildBcd. (An interesing note: When I used the RebuildBcd command, it said that it detected 0 windows installations.) After the first time I did that, I tried the startup repair and got my first and only error message: "Startup repair cannot repair this computer automaticaly". I checked the details and it said "Problem event name: StartupRepairOffline". If you need the rest of the details, I can provide them. But I tried the repair again, and there was apparently no problem. Yet, still got the black screen.I then reformatted again, deleted both drives, and made new ones. I tried to install windows again, and I can get to my desktop.(One thing I noticed is that before I install updates, the computer is saying that my monitor is a "Generic PnP monitor on standard VGA graphics adapter". I dont know much about computers so this may be normal before installing the graphics card updates.)This time, I was connected to the internet and tried to install the system updates first. After all 120+ updates installed, I restarted and got the black screen again.I decided to use the install disc again to reformat, delete, and recreate the hard drives. This time I tried to install windows on the second hard drive (Disk 1) Again, the install went smoothly. I started installing the graphics card and motherboard drivers, but this time it told me that my disk drive D needed to be formatted before use. I reformatted it (this took MUCH longer than the format option on the install disc), installed the drivers, and restarted. I still cant get into the login screen. Finally, I used the install disc to reformat, delete, and recreate the disk drives. This time I installed windows on the first hard drive (drive 0) again and got to the desktop. Now I tried to install the motherboard drivers first, then restart. I did this and was able to restart and get back to the desktop. Next, I installed the graphics card dirvers, and then restarted. Black screen again.
Here are my computer specs:
Windows 7 64bit OEM
EVGA P55 FTW motherboard
EVGA GTX570 graphics card
Intel i5-760 processor
Intel patriot 8gb ram
View 14 Replies
View Related
May 12, 2012
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
View 9 Replies
View Related
Jan 16, 2012
Upon starting the laptop it goes through the standard Starting Windows screen and then i get a black screen with the mouse icon visible and movable however the logon prompt never appears. The same happens when starting in safe mode however an error is displayed stating:Logonui.exe : The Application was unable to start correctly 0x000006 I have performed a chkdsk on the drive and also run windows repair performing startup repair that found no issues. No restore points have been created so cant try that either.t command prompt i have tried:bootrec /fixbootbootrec /fixmbrall to no avail.Other than recovering the users data and re installing the machine from scratch is there any trickery i can perform?
View 2 Replies
View Related
Jun 8, 2012
Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.
View 1 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Dec 5, 2011
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies
View Related
Aug 8, 2011
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Apr 29, 2012
I'm having black screen with cursor only on my laptop! I just restarted my computer because there was a message prompt from my antivirus (AVG) to restart to finish the update. When it restarted all I got was a black screen with cursor only. Same thing happens when I boot to safe mode. Start up repair and system restore cannot fix it automatically. I even tried the crtl+alt+delete. doesn't work either. I'm using dell n4010, windows 7.
View 2 Replies
View Related
May 8, 2011
I have Sony Vaio which is just 1 yr old. About a week before, I installed the latest updates windows 7. When I started the windows, I was able to log into the windows. But then, the system was very slow. So, I turned down the laptop. After that, a message appeared "A disk error occurred. Press Alt+Ctrl+Del". When I press it, the same message appeared. I tried to go from the safe mode and there is a blank scree with a cursor. I cannot do anything with the cursor. No right click. No task bar and even tried pressing shift 5 times. Every step leads me to the same screen. I even tried to get to the vaio recovery for setting it into the default factory settings.
View 3 Replies
View Related
May 18, 2012
i have a hp pavilion dv6z-6c00 running windows 7 home premium 64-bit and it's messed up. a week ago i let the battery run out and when starting it up again, i noticed the windows logo page was in a version close to safe mode. right after, instead of going to the log-in page, all i got was a black screen. left it like that for a while and no change. i then proceeded to restart the laptop numerous times and i still got the same thing. sometimes with a cursor but more so without. i have looked online for solutions and have read multiple incidents where it could be a problem with the start-up with my processes. yet i have not found one closely resembling my situation. some solutions recommended doing some diagnostics and memory tests to find out more info. i would try that with the built-in windows version and it would get hung up at 99%. the bios version to test memory only allowed the short version. some mentioned to go into safe mode, yet i do not even have access to the f8 menu. it just goes through the loading and keeps beeping until i let go of the key. some say to start a system recovery but when i try that, it actually loads with the regular windows logo screen but thats about it; it stays there without doing anything else. i really need help on this because i seriously don't know what else to do. i just got the laptop a couple months ago and to run into this really sucks.
View 14 Replies
View Related
Mar 9, 2012
I have a Sony Vaio VPCSC laptop that I have owned for about four months. In these four months, I have experienced boot issues once before that was resolved by a lucky guess on my part. I have had the blue screen of death about four times before as well. This problem occurred when I was installing a game on my laptop. I had just agreed to the EULA when I went to go turn off my bittorrent. Just then, my computer froze, giving the familiar white-transparent screen with the circular loading cursor. I waited for it to load, and when it didn't, I went off for about thirty minute to do other things to pass the time. When I came back and it was still frozen, I manually shut off the computer. When I booted up again, the Windows Error Recovery screen appeared, after which I selected Start Windows Normally. The Starting Windows animation ran and then afterwards my screen shut off for about three seconds, came back on with solely the black screen and the cursor. After a second the brightness dimmed. I am left with the black screen and the cursor, which occasionally will be the cursor accompanied by the circular loading cursor, much akin to this [URL] but with the Windows 7 cursor. The entire time, my hard drive indicator is lit. Last night I just left the black screen running, and when I woke up, it was the BSOD.
I restarted and then tried every boot option in the advanced boot options menu. The only one that brings me something besides the black screen is system recovery. In system recovery, Startup Repair runs its course and does nothing, System Restore does nothing because I have no restore points (I know, I know, my bad), System Image Recovery cannot find any system images, Windows Memory Diagnostic simply restarts the computer, and Command Prompt works, seeing as when I click it, it opens.
So, from my own assumptions, I think my hard drive is shot, which is frustrating since I have only had this laptop for four months. I've already had two prior laptops that had hard drive crashes within the first year. I have looked at the other threads about this, yet none of them have helped me, because I do not own a Windows 7 disc, or any disc of that sort.
View 3 Replies
View Related
Dec 23, 2011
I havn't booted up my computer in about 4 months. It was working fine before. Anyways the motherboard screen will come up and after that it will go to a black screen with a blinking cursor on the screen "most of the time" sometimes it's just a black screen. I can't boot into safe mode. I have made sure in the bios that the boot order is correct. I can't boot from CDrom. Is my harddrive bad and if my hard drive is bad shouldn't it still be able to boot from CDrom? that's what doesn't make sense to me.
View 9 Replies
View Related
Nov 22, 2012
i have install software yeshield from http://yesshield.com/ ...after i restart it....my laptop have black screen with cursor only after 'welcome' screen....how to fix it....,.i recently do restore point and this is not solved my problem.
View 2 Replies
View Related
Jul 18, 2012
I am getting the black screen with just the cursor. I have tried to boot up in safe mode and I still get nothing. I have tried to put in my windows 7 disk and do a repair and that does not work either.
View 5 Replies
View Related
Dec 7, 2012
This is on a loptop Meldon E6882, running windows 7, to a LED TV HD. From a cold boot both the laptop monitor and HDMI screen show the windows starting screen .. But the HDMI screen goes blank when the login screen appears. I have tried different screen resolutions. No Luck. I have tried from the 'screen resolution' page to get automatically detect the HDMI - No luck I have tried from the 'screen resolution' page to manually select HDMI. Only offers VGA or component, no HDMI.
I think this maybe a disabled driver as I did a manual disabling of these some time ago in order to try and reduce the boot time. I cannot recall the names of the drivers I have put into manual start (some time ago), nor have I found any info on what drivers are needed for the HDMI. The screen driver is an Intel(R) HD Graphics 3000. I'd like to look at some video on the larger screen...
View 4 Replies
View Related
Dec 31, 2012
Can CMOS Setup Utilty fix my black/blue screen?
View 2 Replies
View Related
Jun 28, 2011
I was surfing the net this morning and in the background i was installing "Logmein". I assume the website i got it off is legit as many of my friends have it installed it to play networked games. This is the website i downloaded it from [URL] Whilst it was installing my laptop froze and ctrl + alt + del wouldn't work so i turned it off by holding down the power button and then turned it back on. It now loads up a screen that says "Windows error recovery" and has an option to "Launch Startup Repair" or "Start windows normally" . whichever one i select the outcome is the same... a screen that says "windows is loading files..." followed by a blank login screen with only the cursor for company as shown in the image below: [URL]
I have no idea what to do and this is the first real problem i haven't been able to solve in the 2 years ive had it.
I have tried every option in the "Advanced Boot Options" (F8 on startup) menu in the hope that something different would happen but every single time is identical to the last. I am running windows 7 premium x64 bit on the Sony Vaio VGN-NW20SF. My laptop didn't come with a windows 7 disk so i cant reformat it. I havent backed it up for a while and there are files i would like to keep if possible.
View 2 Replies
View Related
Feb 28, 2011
I installed Windows 7 Service Pack 1 a few days ago, and it's been running since then without any problems. However, just yesterday I fell victim to the "Black Screen of Death". I was about to pop out for a few hours, so I exited the game I was playing to turn my machine off. Despite the game being in Windowed mode, where I could happily see the taskbar, once the program closed my entire screen went black. The cursor was present, but I couldn't do anything - not even Ctrl Alt Del.
I reset the computer with the reset switch on the tower, and it loaded back into Windows without issue. Everything looked OK, so I shut it down normally. When I came back a few hours later and turned on the machine, the real problems began. Everything boots fine, including the "Welcome" screen you get from W7 just before hitting the desktop. But instead of the desktop, I get a black screen and a mouse cursor.
Fortunately, safe mode still worked, so I went straight online to search for a solution. One of the articles I read blamed SP1, and said that uninstalling it had fixed the problem for them. So, in safe mode, I uninstalled SP1. SP1 uninstalled successfully, and my desktop returned! But once everything started loading, my Avast alerted me to a possible rootkit. I opted to delete the file, and was asked to perform a boot-time scan, which I agreed to.
I restarted the machine, and Avast's boot-time scan kicked in. It found nothing. Once the scan had finished, Windows restarted and the problem returned. Black screen, mouse cursor. This seems to be a common symptom of a variety of problems, so I have tried:
- The Prevx tool released in 2009 when this problem cropped up. No joy.
- Checking that Windows isn't looking for multiple monitor displays. It isn't.
- Uninstalling the video drivers, disabling the card, and using a different card with different drivers.
- HKLM regedit to ensure there wasn't a Localhost where there shouldn't be, and that explorer.exe was correctly listed. Everything was fine.
- I've run a Malware Bytes, Spybot, and Avast scan (full, thorough) all of which found nothing.
- I've simply sat and waiting at the black screen, for 15 - 20 minutes with no activity.
Ctrl Alt Del doesn't work, neither does Ctrl Shift Esc. The only thing I can do is reset the machine to prompt a "Windows didn't load properly" screen and go into safe mode. I have one last suspicion to try when I get home from work, and that's disabling / uninstalling the audio drivers. But if that fails, I'm out of ideas.
Windows 7 Professional 64-bit
Intel i7 920
6GB RAM
Radeon 5850 HD
View 1 Replies
View Related
Feb 19, 2012
Win7 (64 bit) will not boot into regular or safe mode, after log in I get a black screen w / cursor, and that is it. I believe the registry is corrupted. I attempted a repair with the win7 disk, that did not help.
View 4 Replies
View Related
May 14, 2012
I have a sony vaio vpceb11fm laptop. the moment i turn it on i get the vaio sign and then a black screen with a flashing cursor on the top left hand corner i tried f10 to recover the system but come across the same problem.
View 2 Replies
View Related
Oct 16, 2012
When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. One major problem is that there are files that I really need for a school project on this computer. So, is there anything I can do to recover the files and fix my computer?
View 3 Replies
View Related
Jul 17, 2011
I get only black screen with mouse cursor. As mentioned in some blog I went the registry through ctrl+alt+Del key. went to winlogin and had not found on other key on shell excepting explorer.exe. Hence did not delete any keys.
View 1 Replies
View Related