Get A Black Screen With The Mouse Icon Visible And Movable?

Jan 16, 2012

Upon starting the laptop it goes through the standard Starting Windows screen and then i get a black screen with the mouse icon visible and movable however the logon prompt never appears. The same happens when starting in safe mode however an error is displayed stating:Logonui.exe : The Application was unable to start correctly 0x000006 I have performed a chkdsk on the drive and also run windows repair performing startup repair that found no issues. No restore points have been created so cant try that either.t command prompt i have tried:bootrec /fixbootbootrec /fixmbrall to no avail.Other than recovering the users data and re installing the machine from scratch is there any trickery i can perform?

View 2 Replies


ADVERTISEMENT

Computer Is Frozen, Black Screen With Movable Mouse After Splash Logo?

Jun 8, 2012

Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.

View 1 Replies View Related

Windows 7 Laptop Turns On With A Black Screen And Movable Cursor

Jan 14, 2013

Just today i read a post stating that java has a bad virus. Know that i ran a malwarebites scan and it found 1 harmful item and i deleted the item. After restarting my computer from a prompt, my lenova v570 laptop now turns on with a black screen and a movable cursor right after the windows "welcome screen".

ctrl + alt + delete does not work

I have tried in safe mode and it turns on properly. So, i tried to do what others sujjested on other forums, which was to " roll back my graphics driver" after that, nothing has change.

View 6 Replies View Related

Laptop-satellite C660-120 Starts Up Black Screen And Movable Cursor?

Jun 16, 2012

its 1 year 7 months old it starts goes to windows error recovery after choosing start windows normally it then goes to black screen and moveable cursor

View 2 Replies View Related

Black Screen After Login With Movable Cursor. Eventually Works Correct?

Aug 29, 2012

My computer loads normally to the login screen. I enter my password and press enter.It displays the welcome message with the spinning circle thing, and seems to load correctly. When finished, it is at this point my screen goes black showing only the cursor which I can move. When I hover over where the taskbar should be, the screen dims a bit. When I move away from the 'invisible' taskbar, the screen brightens to it's original state. This leads me to believe that the desktop may be loaded, but for some reason is not displaying. After about a minute, everything displays and the computer works perfectly. Occasionally, there is not an issue, and the desktop loads perfectly, seconds after logging in.

View 5 Replies View Related

Black Screen With Visible Cursor?

Oct 30, 2012

When I booted up my PC all I got was black screen with white cursor I tried pressing Alt Ctrl Delete but it didn't work I restarted the computer manually a few times and it got back to normal, this happened to me few times already, anything I should do to prevent such thing from happening?

View 1 Replies View Related

Black Screen, Visible Cursor, Windows 7?

Mar 23, 2011

Black screen, visible cursor, Win 7, after boot, after win logo, at logon screen! I have unplugged & plugged in desktop, monitor; removed any usb external drives, tried all restarts [safe, networking, etc.].Can't get to a screen I can work with [all microsoft fixes assume one can get to working desktop to run sys restore]. STUCK! Don't want to do a re-install and lose everything!

View 5 Replies View Related

Windows 7 Boots To Black Screen With Only Cursor Visible

Jul 17, 2012

Basically I woke up this morning to my computer sitting at a black screen with the cursor visible. I'm able to move the cursor but do nothing else. I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check: [URL] from there it moves back to the black screen with the cursor. I again restarted and booted in safe mode this time. I was then able to reach windows and tried to do a system restore to an earlier point. When I did this i was greeted with this error [URL]. Finally here is my harddrive just in case [URL]. I exported my full system info:

OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
System Model DH67BL__
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Intel Corp. BLH6710H.86A.0076.2010.1115.1959, 15/11/2010
SMBIOS Version 2.6
Windows Directory C:Windows
System Directory C:Windowssystem32
Boot Device DeviceHarddiskVolume1

View 4 Replies View Related

Black Screen With Blinking CD Icon

Dec 19, 2012

I restored my computer successfully but I still got the blinking cd icon next to my mouse pointer. After I restarted my computer I got Windows 7 with a clock and "2 min" under it and then it went to a black screen with blinking cd icon. I don't understand what is going on. I can get into task manager and type in explorer.exe but that doesn't do anything. I also tried the Regedit fix, but that didnt do anything too. I need help on how to fix this. My CD Rom won't even open for some reason.

View 11 Replies View Related

Black Screen And Can Only See Mouse?

Jun 5, 2012

When I boot up my computer going into the starting page since there is a guest acccount aand a admin I can only see my mouse and a blackground I don't understand computers that much but

View 1 Replies View Related

Black Screen With Only Mouse?

Aug 28, 2012

So i have windows 7 64 bit pc that loads fine with one setup but then when i go set it up for another person in my office all i get is black screen with mouse and thats it.

View 1 Replies View Related

No Logon Screen With Black Screen And Mouse?

Apr 11, 2012

yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.

View 3 Replies View Related

Windows 7 Black Screen, Can See Mouse, Won't Go Further

May 7, 2011

Okay so I was just on my computer and it was being a little slower at responding than usual and then it froze so I had to hol the power button to turn it off. When I turned it back on it came to a black screen with my cursor sitting there. I can move the cursor around but cannot use ctrl+alt+del to open task manager. Safe mode leads to the same problem. Safe mode with networking also leads to the same problem. I don't have a restore point so system restore is out of the question. I tried startup repair but it said there were no problems detected. I ran a memory test to try to find problems and it came up with nothing. I looked around the Internet for solutions but only found solutions for people who could access task manager.

View 5 Replies View Related

Get A Black Screen With Only Mouse Pointer On It?

Sep 13, 2011

Today i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happenswhat can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which onesi waited on the black screen and it seems to start windows after 10 mins which is way longer than usual and thats my problem its anoying. what else can i do? i already did the restoring point process. and start up restore, and memory disk checkup.

View 8 Replies View Related

Black Screen And Mouse Curser

Apr 11, 2011

So i came home and turned on my computer, when it didn't wanted to go further than to the Login Screen, when i got my Black Screen and i could only see my Curser. What to do? Format it?

View 8 Replies View Related

Black Screen With Mouse Pointer

Dec 29, 2009

Recently my computer has not been loading windows 7 up intill the login screen. I get to see the little circle color things swirl around with the "Loading Windows" text, but were the login screen usually appears, I get a totally black screen with a movable mouse pointer. It is a brand new rig with 4g RAM (2g sticks) and I am running the 64 bit version but wounder if this is causing the problem.

Also when I try to do a system restore using the windows disc, I must first go into the settings (by pressing DEL on start up), then set my bay drive to boot first rather then my SATA to get the "Press any button to boot from disc... " prompt. Otherwise windows will ignore the disc. However when I load the disc and try to go into restore points, there are none to choose from.... I have no clue what to do and am willing to just install windows complelty again ext.

View 4 Replies View Related

Black Screen With Mouse Pointer?

Aug 7, 2011

My laptop didn't reboot wen i restarted it.. so i decided to recover using the recovery disk.. But wen it reached the last cd, the recovery failed. So i decided to choose to delete all files.. after formatting, wen I reboot it appears, BOOTMGR missing. so I used windows 7 cd installer, planning to reinstall my OS.. i restarted, reboot on cd/dvd, then "windows loading" appears.. after that black screen with appears.. wmouse pointer appears.. Laptop: toshiba A665 OS: windows 7 home premium

View 5 Replies View Related

Black Screen With Mouse Curser

Nov 22, 2009

I wanted to upgrade from Vista to 7, but I didn't want all of my programs to save. I bought an external HDD, and put all of my games and programs which I didn't want to get lost into the HDD. Then, I reinstalled Vista, so I had no data on my PC, but only on my external HDD.

After that, I installed Windows 7. Everything went well, until I had to boot my PC. It said it was loading windows (7), and than the screen turned black, and I haven't seen nothing exept of the mouse curser.

What could the problem be and how could I fix it?

I think the internet drivers are lost too. How can I reinstall them to have my web working?

View 2 Replies View Related

Black Screen With Mouse Cursor

Jan 18, 2010

Any one experienced a problem with Acronis 2010.

Didn't had time to look in to it, hope you guys can save me some time.

I used the Acronis 2010 System Cleanup for the first time. My windows 7 stopped responding, and I had to do hard reset.

After reset windows boots as far as black screen with mouse cursor.

I can move the mouse and Caps Lock respond, but that about it.

Same in safe mode.

Had no luck with Sys Restore, Boot recovery, Chkdsk didn't find any problems.

Ram Fine, swapped dims, memtest pass.

Didn't had time to do more.

System Info:-

Windows 7 x64 Enterprise.
UD5, I7 920, 12GB RAM, 260gtx
x2 750 in Raid 0
x4 1TB blacks in Raid 5

I have 4 days old system image, but I like to know what went wrong.

View 3 Replies View Related

Windows 7 Black Screen With Mouse Pointer

Dec 13, 2012

[code] This info above is not for the PC in trouble.I have an ACER laptop and it all of a sudden went to a blue screen and then tried to reboot to a black screen with mouse pointer only. Tried my win 7 upgrade CD to see if I could repair and it only loads to the same end. No options are asked for.The blue screen has appeared a couple of times and states a unusable boot sector. I would like to run a checkdisk but cannot find one to put on a memory stick with a minimal operating system.I have tried all the reboot choices, F8, F2 and F12.I tried to use an old windows XP install CD and when I select install it says a HDD can not be found.

View 3 Replies View Related

Black Screen With Mouse Cursor In Windows 7?

Jul 12, 2011

A few nights ago I came home to my Win 7 64 bit desktop frozen in a busy state. Windows was running, but the cursor was indicating busy and the computer was locked up. After 10 minutes of waiting for it to respond (hitting Ctrl+Alt+Del or Ctrl+Shift+Del had no response), I did a hard reboot (held down power button until the computer restarted). When the computer booted back up - I saw a "Resuming Windows" screen rather than "Starting Windows." Windows did load, and while everything appeared to run fine (Start menu would open and cursor was okay), no programs would open after clicking on them, and task manager would not appear. Fed up, I did another hard reboot. This time, Windows did not boot. The Windows 7 logo appears, gets very dim, and after a while a 0xed (Unmountable boot volume) BSOD appears and the computer restarts.

The fun really begins when trying to launch Windows Setup, any of the three safe modes, or last known good configuration. In the safe mode scenarios, safe mode never loads (gets hung up while loading drivers). For last known good configuration, I get the same BSOD. The really interesting part is Windows Setup. Windows setup loads (you see the loading bar), and then goes to a black screen. After a while (15-60 minutes), a cursor appears on the screen. You can move the cursor around - but that's it. Ctrl+Alt+Del has no effect. I've left the computer on for 24+ hours at this point - nothing else happens. I have a separate Windows 7 64 bit repair CD as well as a Windows 7 64 bit ERD CD. When forcing the computer to boot off the CDs, the same exact scenario occurs. Windows Setup loads...then black screen. Booted off an Ubuntu live CD - the harddrives (I have three) are all fine. Data is okay, SMART tests all pass. If I could just get to a place where I could run something like chkdsk or some fixboot commands - I'd probably be okay. But anytime I try to boot/run some Windows based software - everything goes to crap.

My next step (which I will probably work on tonight/tomorrow) is to remove the harddrive that has Windows installed on it (a ~70 GB hdd), hook it up to another computer through a USB cable system that will make it look like an external harddrive, and hopefully run chkdsk on it that way. I'm posting here to see if anyone has any suggestions or ideas though. It blows my mind that whatever is wrong with my Windows installation is somehow blocking a windows repair disc from loading.

View 3 Replies View Related

Black Screen At Boot With My Mouse Cursor

Oct 20, 2009

I have a problem when booting up Windows 7.

When I boot, I see the 4 particles, but after that, i get a black screen with my mouse cursor, but that's all.

If i wait for about 7 minutes, i get the login screen and everything works fine.

I haven't installed anything or done anything that could cause this.

Is this normal? I hope not because i hate waiting :P

I have read some other topics that seemed to be almost the same problem as mine. Some say you have to get a new videodriver. have done that, didn't

work. Restoring to a restore point didn't work either.

Any suggestions?

EDIT: Forgot to say, it is a dual boot (win xp/win 7) (maybe usefull information)

View 9 Replies View Related

Black Screen With Mouse (only If Lan Cable Plugged In)

Aug 29, 2012

System: Win7x64 pro, 32gb RAM, Asus Z77, i7 2600k. Normally boots in less than 60 secs Now, today it will boot to a Black Screen with a movable white mouse arrow (not a blinking cursor).

BUT ONLY if the NIC is enabled and the LAN cable is connected. If I unplug the lan cable or disable the NIC in the BIOS it boots fine. Additionally, if I leave the NIC enabled but unplug the lan cable until AFTER it boots to the desktop, I'm fine. (Thus, I can't assume it's a driver issue. Something is happening upon boot via the network.)

I've looked in the Event Viewer and can find where I have to power off the system via a hard reset and I can see errors when it boots and it sees the NIC unplugged but I can't find anything else.

Something else, it only happens on my User Account. I created another account (aptly called Black Screen) and it booted fine with the NIC enabled and plugged in.

I'm running NIS2012, updated and have done a full scan twice now.

Finally, thinking it was a startup service/program under my original user account I used msconfig to disable all non MS services and disable every startup. It still booted to a Black Screen w/cursor if the NIC was enabled and plugged in. Furthermore, Safemode w/o networking is fine but safemode w/networking has the same problem. BUT ONLY IF THE NIC IS PLUGGED IN AT BOOT - NOT AFTER THE BOOT.

Edit: updated Malwarebytes - scanned and found nothing. Used MS Security Essentials - scanned and found nothing.

View 3 Replies View Related

Windows 7 Boots But Then Black Screen With Mouse?

Oct 19, 2012

I can boot windows seven but the screen goes black when i select my user icon and the mouse pointer is visable and moves but nothing is there to click. I can get into taskmanager but there is nothing i can do there either. I have lost my instal/upgrade disk. This was an upgrade from vista.

View 1 Replies View Related

Windows 7 No Icon / Taskbar / CTRL ALT DEL Shows Black Screen

Mar 27, 2010

I know there is a thread running round with issues regarding Win 7 desktop not showing icons and the solutions to it.even CTRL ALT DEL don't work. Just shows me a black screen which fades back to a icon-less desktop. Solutions regarding finding explorer.exe and running it to show desktop icons don't work either.Just pops out the explorer window showing the desktop.And don't even start on right clicking desktop and select show icons.... cause that's the first thing I tried. System restore in safe mode yielded no results. Virus and malware scans turn up a clean bill. I'm only short of reformatting the pc, and I'm not even sure if I'm able to run the reformat from windows.

View 3 Replies View Related

System Boots To Black Screen With Mouse Pointer?

Dec 13, 2011

I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition

View 5 Replies View Related

Black Screen With Mouse Pointer After Windows 7 Installation

Mar 15, 2010

installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.

View 7 Replies View Related

Black Screen With Mouse Pointer After Windows 7 Logo?

Sep 6, 2012

I am running Windows 7 Home Premium.All of a sudden, it has stopped starting up without me installing anything new.I gets past the bios, shows the Windows logo and then before the login page appears, the screen goes black and only has the mouse pointer (which I can move around curiously!).I have tried doing Startup repair, loading in Safe Mode, loading with lower screen resolution, loading with Last Known Good Configuaration, done a memory scan: they all lead to the same result.I don't think it is an issue with the Hard Drive because I can still hear it spinning, also, I am able to pull files off it when I plug it in to my USB (using an adapter). Also, Windows loads to some point and it would get stuck at the bios if it was.Don't think it is the graphics card or I wouldn't be able to see anything that I see up until that point including the mouse pointer.I have tried using Google but many places have left this unresolved or the problem is not exactly like mine.

View 2 Replies View Related

Upgrade Gave Black Screen With Mouse Pointer Only?

Jun 18, 2012

Upgraded to Windows7 Bit32 from Vista on HP desktop machine. The only thing I get is a black screen after the startup and a mouse pointer, but nothing else.

View 2 Replies View Related

Black Screen, Mouse Pointer In Center On Bootup?

Dec 8, 2011

When I boot my computer, I see "Starting Windows". The screen then goes black and the mouse pointer shows up in the middle. The mouse does not move.I inserted my Windows 7 disc and went into repair. I tried a restore and a repair. Nothing happened. I should note that also my mouse pointer was not functioning at this time, either. That is, the pointer was in the center and the mouse was not moving.I hear the fan going on, eventually it stops making noise, not to be confused with the computer shutting off. I guess you call that more of an "idle sound".I checked the connections. Unplugged and replugged in the mouse. No luck.

View 2 Replies View Related

Black Screen Of Death With Mouse Pointer - Acer Aspire 5732Z

Mar 3, 2012

My mother in law has an acer aspire 5732Z, yesterday she was fiddling with the touch pad sensitivity and suddenly her screen went black. Each time she tries restarting, she gets the windows 7 startup screen, but just before getting to the log in screen, the screen goes black. The mouse pointer is still on the screen and she can hear that the computer is still on. But besides that, nothing can make it start up properly.I have tried talking her through safe mode startup, but that didn't do anything. She has pulled out the battery and restarted, which does nothing either.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved