Black Screen And Can Only See Mouse?
Jun 5, 2012When I boot up my computer going into the starting page since there is a guest acccount aand a admin I can only see my mouse and a blackground I don't understand computers that much but
View 1 Replies
ADVERTISEMENT
Black Screen With Only Mouse?
Aug 28, 2012So i have windows 7 64 bit pc that loads fine with one setup but then when i go set it up for another person in my office all i get is black screen with mouse and thats it.
View 1 Replies View RelatedNo Logon Screen With Black Screen And Mouse?
Apr 11, 2012yesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
View 3 Replies View RelatedWindows 7 Black Screen, Can See Mouse, Won't Go Further
May 7, 2011Okay so I was just on my computer and it was being a little slower at responding than usual and then it froze so I had to hol the power button to turn it off. When I turned it back on it came to a black screen with my cursor sitting there. I can move the cursor around but cannot use ctrl+alt+del to open task manager. Safe mode leads to the same problem. Safe mode with networking also leads to the same problem. I don't have a restore point so system restore is out of the question. I tried startup repair but it said there were no problems detected. I ran a memory test to try to find problems and it came up with nothing. I looked around the Internet for solutions but only found solutions for people who could access task manager.
View 5 Replies View RelatedGet A Black Screen With Only Mouse Pointer On It?
Sep 13, 2011Today i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happenswhat can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which onesi waited on the black screen and it seems to start windows after 10 mins which is way longer than usual and thats my problem its anoying. what else can i do? i already did the restoring point process. and start up restore, and memory disk checkup.
View 8 Replies View RelatedBlack Screen And Mouse Curser
Apr 11, 2011So i came home and turned on my computer, when it didn't wanted to go further than to the Login Screen, when i got my Black Screen and i could only see my Curser. What to do? Format it?
View 8 Replies View RelatedBlack Screen With Mouse Pointer
Dec 29, 2009Recently my computer has not been loading windows 7 up intill the login screen. I get to see the little circle color things swirl around with the "Loading Windows" text, but were the login screen usually appears, I get a totally black screen with a movable mouse pointer. It is a brand new rig with 4g RAM (2g sticks) and I am running the 64 bit version but wounder if this is causing the problem.
Also when I try to do a system restore using the windows disc, I must first go into the settings (by pressing DEL on start up), then set my bay drive to boot first rather then my SATA to get the "Press any button to boot from disc... " prompt. Otherwise windows will ignore the disc. However when I load the disc and try to go into restore points, there are none to choose from.... I have no clue what to do and am willing to just install windows complelty again ext.
Black Screen With Mouse Pointer?
Aug 7, 2011My laptop didn't reboot wen i restarted it.. so i decided to recover using the recovery disk.. But wen it reached the last cd, the recovery failed. So i decided to choose to delete all files.. after formatting, wen I reboot it appears, BOOTMGR missing. so I used windows 7 cd installer, planning to reinstall my OS.. i restarted, reboot on cd/dvd, then "windows loading" appears.. after that black screen with appears.. wmouse pointer appears.. Laptop: toshiba A665 OS: windows 7 home premium
View 5 Replies View RelatedBlack Screen With Mouse Curser
Nov 22, 2009I wanted to upgrade from Vista to 7, but I didn't want all of my programs to save. I bought an external HDD, and put all of my games and programs which I didn't want to get lost into the HDD. Then, I reinstalled Vista, so I had no data on my PC, but only on my external HDD.
After that, I installed Windows 7. Everything went well, until I had to boot my PC. It said it was loading windows (7), and than the screen turned black, and I haven't seen nothing exept of the mouse curser.
What could the problem be and how could I fix it?
I think the internet drivers are lost too. How can I reinstall them to have my web working?
Black Screen With Mouse Cursor
Jan 18, 2010Any one experienced a problem with Acronis 2010.
Didn't had time to look in to it, hope you guys can save me some time.
I used the Acronis 2010 System Cleanup for the first time. My windows 7 stopped responding, and I had to do hard reset.
After reset windows boots as far as black screen with mouse cursor.
I can move the mouse and Caps Lock respond, but that about it.
Same in safe mode.
Had no luck with Sys Restore, Boot recovery, Chkdsk didn't find any problems.
Ram Fine, swapped dims, memtest pass.
Didn't had time to do more.
System Info:-
Windows 7 x64 Enterprise.
UD5, I7 920, 12GB RAM, 260gtx
x2 750 in Raid 0
x4 1TB blacks in Raid 5
I have 4 days old system image, but I like to know what went wrong.
Windows 7 Black Screen With Mouse Pointer
Dec 13, 2012[code] This info above is not for the PC in trouble.I have an ACER laptop and it all of a sudden went to a blue screen and then tried to reboot to a black screen with mouse pointer only. Tried my win 7 upgrade CD to see if I could repair and it only loads to the same end. No options are asked for.The blue screen has appeared a couple of times and states a unusable boot sector. I would like to run a checkdisk but cannot find one to put on a memory stick with a minimal operating system.I have tried all the reboot choices, F8, F2 and F12.I tried to use an old windows XP install CD and when I select install it says a HDD can not be found.
View 3 Replies View RelatedBlack Screen With Mouse Cursor In Windows 7?
Jul 12, 2011A few nights ago I came home to my Win 7 64 bit desktop frozen in a busy state. Windows was running, but the cursor was indicating busy and the computer was locked up. After 10 minutes of waiting for it to respond (hitting Ctrl+Alt+Del or Ctrl+Shift+Del had no response), I did a hard reboot (held down power button until the computer restarted). When the computer booted back up - I saw a "Resuming Windows" screen rather than "Starting Windows." Windows did load, and while everything appeared to run fine (Start menu would open and cursor was okay), no programs would open after clicking on them, and task manager would not appear. Fed up, I did another hard reboot. This time, Windows did not boot. The Windows 7 logo appears, gets very dim, and after a while a 0xed (Unmountable boot volume) BSOD appears and the computer restarts.
The fun really begins when trying to launch Windows Setup, any of the three safe modes, or last known good configuration. In the safe mode scenarios, safe mode never loads (gets hung up while loading drivers). For last known good configuration, I get the same BSOD. The really interesting part is Windows Setup. Windows setup loads (you see the loading bar), and then goes to a black screen. After a while (15-60 minutes), a cursor appears on the screen. You can move the cursor around - but that's it. Ctrl+Alt+Del has no effect. I've left the computer on for 24+ hours at this point - nothing else happens. I have a separate Windows 7 64 bit repair CD as well as a Windows 7 64 bit ERD CD. When forcing the computer to boot off the CDs, the same exact scenario occurs. Windows Setup loads...then black screen. Booted off an Ubuntu live CD - the harddrives (I have three) are all fine. Data is okay, SMART tests all pass. If I could just get to a place where I could run something like chkdsk or some fixboot commands - I'd probably be okay. But anytime I try to boot/run some Windows based software - everything goes to crap.
My next step (which I will probably work on tonight/tomorrow) is to remove the harddrive that has Windows installed on it (a ~70 GB hdd), hook it up to another computer through a USB cable system that will make it look like an external harddrive, and hopefully run chkdsk on it that way. I'm posting here to see if anyone has any suggestions or ideas though. It blows my mind that whatever is wrong with my Windows installation is somehow blocking a windows repair disc from loading.
Black Screen At Boot With My Mouse Cursor
Oct 20, 2009I have a problem when booting up Windows 7.
When I boot, I see the 4 particles, but after that, i get a black screen with my mouse cursor, but that's all.
If i wait for about 7 minutes, i get the login screen and everything works fine.
I haven't installed anything or done anything that could cause this.
Is this normal? I hope not because i hate waiting :P
I have read some other topics that seemed to be almost the same problem as mine. Some say you have to get a new videodriver. have done that, didn't
work. Restoring to a restore point didn't work either.
Any suggestions?
EDIT: Forgot to say, it is a dual boot (win xp/win 7) (maybe usefull information)
Black Screen With Mouse (only If Lan Cable Plugged In)
Aug 29, 2012System: Win7x64 pro, 32gb RAM, Asus Z77, i7 2600k. Normally boots in less than 60 secs Now, today it will boot to a Black Screen with a movable white mouse arrow (not a blinking cursor).
BUT ONLY if the NIC is enabled and the LAN cable is connected. If I unplug the lan cable or disable the NIC in the BIOS it boots fine. Additionally, if I leave the NIC enabled but unplug the lan cable until AFTER it boots to the desktop, I'm fine. (Thus, I can't assume it's a driver issue. Something is happening upon boot via the network.)
I've looked in the Event Viewer and can find where I have to power off the system via a hard reset and I can see errors when it boots and it sees the NIC unplugged but I can't find anything else.
Something else, it only happens on my User Account. I created another account (aptly called Black Screen) and it booted fine with the NIC enabled and plugged in.
I'm running NIS2012, updated and have done a full scan twice now.
Finally, thinking it was a startup service/program under my original user account I used msconfig to disable all non MS services and disable every startup. It still booted to a Black Screen w/cursor if the NIC was enabled and plugged in. Furthermore, Safemode w/o networking is fine but safemode w/networking has the same problem. BUT ONLY IF THE NIC IS PLUGGED IN AT BOOT - NOT AFTER THE BOOT.
Edit: updated Malwarebytes - scanned and found nothing. Used MS Security Essentials - scanned and found nothing.
Windows 7 Boots But Then Black Screen With Mouse?
Oct 19, 2012I can boot windows seven but the screen goes black when i select my user icon and the mouse pointer is visable and moves but nothing is there to click. I can get into taskmanager but there is nothing i can do there either. I have lost my instal/upgrade disk. This was an upgrade from vista.
View 1 Replies View RelatedSystem Boots To Black Screen With Mouse Pointer?
Dec 13, 2011I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition
View 5 Replies View RelatedBlack Screen With Mouse Pointer After Windows 7 Installation
Mar 15, 2010installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.
View 7 Replies View RelatedBlack Screen With Mouse Pointer After Windows 7 Logo?
Sep 6, 2012I am running Windows 7 Home Premium.All of a sudden, it has stopped starting up without me installing anything new.I gets past the bios, shows the Windows logo and then before the login page appears, the screen goes black and only has the mouse pointer (which I can move around curiously!).I have tried doing Startup repair, loading in Safe Mode, loading with lower screen resolution, loading with Last Known Good Configuaration, done a memory scan: they all lead to the same result.I don't think it is an issue with the Hard Drive because I can still hear it spinning, also, I am able to pull files off it when I plug it in to my USB (using an adapter). Also, Windows loads to some point and it would get stuck at the bios if it was.Don't think it is the graphics card or I wouldn't be able to see anything that I see up until that point including the mouse pointer.I have tried using Google but many places have left this unresolved or the problem is not exactly like mine.
View 2 Replies View RelatedGet A Black Screen With The Mouse Icon Visible And Movable?
Jan 16, 2012Upon starting the laptop it goes through the standard Starting Windows screen and then i get a black screen with the mouse icon visible and movable however the logon prompt never appears. The same happens when starting in safe mode however an error is displayed stating:Logonui.exe : The Application was unable to start correctly 0x000006 I have performed a chkdsk on the drive and also run windows repair performing startup repair that found no issues. No restore points have been created so cant try that either.t command prompt i have tried:bootrec /fixbootbootrec /fixmbrall to no avail.Other than recovering the users data and re installing the machine from scratch is there any trickery i can perform?
View 2 Replies View RelatedUpgrade Gave Black Screen With Mouse Pointer Only?
Jun 18, 2012Upgraded to Windows7 Bit32 from Vista on HP desktop machine. The only thing I get is a black screen after the startup and a mouse pointer, but nothing else.
View 2 Replies View RelatedBlack Screen, Mouse Pointer In Center On Bootup?
Dec 8, 2011When I boot my computer, I see "Starting Windows". The screen then goes black and the mouse pointer shows up in the middle. The mouse does not move.I inserted my Windows 7 disc and went into repair. I tried a restore and a repair. Nothing happened. I should note that also my mouse pointer was not functioning at this time, either. That is, the pointer was in the center and the mouse was not moving.I hear the fan going on, eventually it stops making noise, not to be confused with the computer shutting off. I guess you call that more of an "idle sound".I checked the connections. Unplugged and replugged in the mouse. No luck.
View 2 Replies View RelatedComputer Is Frozen, Black Screen With Movable Mouse After Splash Logo?
Jun 8, 2012Computer is frozen, black screen with movable mouse after splash logo. Same happens in safe mode. The log in screen never shows up. The computer sounds like its loading at that point, but nothing ever comes up. I can get into ubuntu. This happened after updating my graphics card nvidia. I have dual monitors. Windows 7 64 bit Home Premium, HP Pavilion p6107c Desktop.
View 1 Replies View RelatedBlack Screen Of Death With Mouse Pointer - Acer Aspire 5732Z
Mar 3, 2012My mother in law has an acer aspire 5732Z, yesterday she was fiddling with the touch pad sensitivity and suddenly her screen went black. Each time she tries restarting, she gets the windows 7 startup screen, but just before getting to the log in screen, the screen goes black. The mouse pointer is still on the screen and she can hear that the computer is still on. But besides that, nothing can make it start up properly.I have tried talking her through safe mode startup, but that didn't do anything. She has pulled out the battery and restarted, which does nothing either.
View 4 Replies View RelatedHow To Make White Mouse Pointer Go Black
Mar 27, 2011I would like to replace my elusive, puny little white mouse pointer with a big, bold black one. Win 7 is an all-singing, all-dancing clever stuff, i'm told so am thinking there must be a way of doing this as opposed to buying third-party software.
View 3 Replies View RelatedVideo Turns Black And Grey, Keyboard/mouse Becomes Unresponsive
May 11, 2012I bought a new computer with the following parts. PCPartPicker part list / Price breakdown by merchant / Benchmarks CPU: Intel Core i3-2120 3.3GHz Dual-Core Processor ($117.99 @ SuperBiiz) Motherboard: ASRock P67 PRO3 SE ATX LGA1155 Motherboard ($102.55 @ Newegg) Memory: Patriot Signature 8GB (2 x 4GB) DDR3-1600 Memory ($41.99 @ Amazon) Hard Drive: Samsung Spinpoint F3 1TB 3.5" 7200RPM Internal Hard Drive ($109.99 @ Newegg) Video Card: Asus Radeon HD 7850 2GB Video Card ($249.99 @ Amazon) Case: Fractal Design Core 3000 ATX Mid Tower Case ($69.99 @ NCIX US) Power Supply: Corsair 500W ATX12V Power Supply ($41.98 @ Newegg) Optical Drive: LG GH22NS90B DVD/CD Writer ($22.98 @ Newegg) Monitor: Acer S220HQLAbd 21.5" Monitor ($128.96 @ CompUSA) Total: $886.42 (Prices include shipping and discounts when available.) (Generated by PCPartPicker 2012-05-12 00:22 EDT-0400)
When I first got it, it arrived without the video card so I used a temp one. The computer started crashing, so I thought it was because the video card was old. I borrowed another one from a friend and uninstalled the old drivers and installed the new ones. The same thing happened with this one. I decided to run some test so I downloaded prime95, memtest86+, and a video benchmark. Everything passed except for prime95. Memtest ran for 11 hours with no errors and prime95 crashes after a couple of minutes. I returned the motherboard because I thought it was faulty, but the same thing happens with replacement. I tried moving the memory sticks to different slots and using one and then the other. I tried installing windows 7 32bit and 64bit. I ran the diagnostic test for the cpu and everything passed. I have installed the latest updated drivers.
So if it's not the motherboard, memory, cpu, nor gpu, what could it be. Can someone please help me identify the problem(s). I don't know where the .dmp went but here is a screen shot [URL] and I will attach the PERFMON HTML file.
When Reboot, The Screen Eventually Goes To A Black Screen Saying "Windows 7 Failed To Start?
May 12, 2012My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
Dell Vostro 1520 Black Screen Won't Reach Login Screen
Dec 15, 2011i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedSystem Goes To Black Screen Before Login/welcome Screen After Windows 7 32-bit Upgrade?
Sep 2, 2012My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedFull Screen Videos Crashing To Black Screen And Buzzing
Mar 26, 2011My computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
Black Screen After Windows Start Up Doesn't Go To Login Screen
Nov 12, 2011I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedBlack Screen On Startup / Showing Cursor / Doesn't Go To Log In Screen
Dec 5, 2011I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View Related