Did A System Restore / Now Get A Black Screen When Start Pc
Jan 13, 2012
At first it started with me downloading Cataclyst Control Center to update my graphics card wich is a X-fire ATI 5000 series. There apeared a black border around my screen of around 1 inch, but wherever I chekked the resolution showed it was my native 1920x1080, while still showing the black border.I tried de-installing CCC at that point but it didn't work, I also tried a system restore, but that didn't work either. I formatted my pc to factory defaults at that point.After a month I started using the pc again, and when playing Battlefield 3 I got an error that my graphocs card was failing or something. So this time I went to the device manager and tired updating it there, but it automaticly installed CCC again and my resolution got screwed again.I found a solution from: [Solved] 4870 not displaying 1920x1080 on Acer H233H - ATI - Graphic-Displays."I just went through this myself with an Acer P235H. The problem has nothing to do with Acer, and everything to do with ATI. You see, ATI assumes that you'll use your HDMI cable to hook up to a TV. Since most TVs are configured with overscan (i.e. the edges of the broadcasted image don't appear), ATI aggressively defaults to shrinking the image by 15% when using HDMI to ensure that the entire desktop will be visible.
The solution is to install the ATI Catalyst Control Center, available from their website. There's a section called something like "desktops & displays." On the bottom of that tab will be an area with a small icon of a monitor. Right click on that and select "Configure..." One of the tabs that shows up has a slider for display scaling. Move the slider to 0%, and voila! It was for my wife's computer. I had already promised to reduce the cable clutter by having a single thin cable for both audio and video, so not getting HDMI working would have entailed a serious loss of face."So I tried looking in the CCC, but found no such option, and then went to the website to update CCC. I got the latest version, and again found no such option. I chose to do a system restore and never again try to update my drivers for the sake of having a normal screen.When the restore was finished it automaticly restarted my pc, and I got to the password screen (with normal resolution now) and typed in my password, after that I got a blackish screen with only my mouse on it, wich I could still move.I restared my pc again then and this time I didnt even get to the password screen, it just straight out went to the blackish screen with my mouse on it after the welcome screen.
Just since yesterday my laptop was attacked by some kind of malware that tries to scare me into buying their products and hiding all my files. I managed to unhide all my files but somehow the virus still remains. I tried every solution on the web to get rid of this virus but to no avail **** does not work at all.And to top it all this particular virus shuts down all my usb ports and disabling me to connect to another computer to share files even. So I decided to reformat my laptop. But the thing is when after I clicked system restore, the thing shut down. Ok fine everything was normal and it started up as usual, but the next thing that happened was that it was stuck on a black screen. I thought the program was processing but I was wrong ( I've never reformatted a computer so please bare with my sillyness ) I've tried many many times by shutting down and trying to click on system restore but still same result, stuck on a black screen. And pressing F11 doesn't really help either, it will still result in a black screen. I've tried to use the system recovery disc but it didn't work at all.
I have Windows 7. Earlier, my computer was acting funny after trying to open some videos from my camera that I had connected. I retarted hoping it would act normal. I got the opposite. Every time I try to start up, it goes to a black screen after I put in my password. I will not let me open task manager or anything. I see a cursor that I can move around, but just a black screen. I've tried to google the problem (I am currently in safe mode) and tons of people said to do a system restore. Problem is, it says I haven't created any restore points and to open up system protection.
Here lies ANOTHER problem in my awesome string of luck. When I click on it, the system protection tab is not there. It's completely missing. I tried going to start, right clicking computer and going to properties. Guess what? It's not there either like it should be.
I have Windows 7. Earlier, my computer was acting funny after trying to open some videos from my camera that I had connected. I retarted hoping it would act normal. I got the opposite. Every time I try to start up, it goes to a black screen after I put in my password. I will not let me open task manager or anything. I see a cursor that I can move around, but just a black screen. I've tried to google the problem (I am currently in safe mode) and tons of people said to do a system restore. Problem is, it says I haven't created any restore points and to open up system protection. Here lies ANOTHER problem in my awesome string of luck. When I click on it, the system protection tab is not there. It's completely missing. I tried going to start, right clicking computer and going to properties.
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
I have a Dell system studio slim desktop, I used the "reinstallation DVD, windows 7 home premium 64-bit" disk to reinstall. After the reinstallation, when it automatically reboots, the screen starts up where I can press F2 or F12 for boot options but after that and windows logo, it stays on a black screen.
For a little background history, the desktop had a power supply die and I bought and added a new PSU. After that it worked until viruses on my computer forced me to reinstall windows.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
I have a samsung R700 laptop, which decided this morning to die. I had downloaded some films last night (which I have done many times with no problems previously), switched off the laptop (which rarely do - prefering instead to hibernate.) When I switched it back on this morning, windows was carrying out about a million updates. After around 10 minutes, the screen came on, and everything looked normal. I tried to open a document, but the laptop screen froze, and although the curser was there and moving, I was unable to close or open any other pages/applications. After restarting a few times and having the same thing happen, I started in safemode, restored it back to last month, and tried again. In safemode I can scan (have used 3 virus scanners which have been reccomended) but all results are clear. I can access the internet and all of my documents. Restarted the machine after an hour switched off, and when booting up in normal mode, the home screen is just black. There is a white cursor which moves, but no taskbar or icons etc. Safe mode is still functional.
my hp notebook has a black screen with a white curser. i have tried a recovery disc, running a system diagnostic which tells me it all passed, i have tried a hard reset, and my safe mode wont come up.
I have just put 64bit 7 on my pc after having 32bit 7 on it and I have noticed after the starting windows orb goes the screen turns blank for 10 secs then tarts allot slower than it use to on 32bit and 32bit never had that problem is there a way to stop this from happening?
im having this problem on my acer 4741g laptop recently. Upon start up im having this black screen with cursor for about 10-15minutes until in boots up to normal start up display, i also observed that after the black screen in boots up very slow. This only happens when i shut down or restart my system otherwise this problem dont show up.I already did some troubleshooting including start up repair, adjusting my resolution and system recovery but still cant fix the problem.
I was about to use my friends new ASUS laptop this morning, and soon the Windows update started. But after a while, the battery was out because the plug was not connected. So that I restarted. But this time normal windows 7 looked like started with comment updating something. But it took very long time and next time when I looked at it, it was just black screen.After that I shut it down and restarted. But nothing happened on the screen. I tried to press Alt+F10 at the same time, but didn't work.
My Dell laptop won't load past the windows start up screen.. then goes black sometimes with cursor, sometimes without. F8 does not work, safe mode with networking will not come up.
Recently i updated my M17x R2 laptop,windows 7, ati 4870x2 graphics, 2 x 320GB hard drives,and all of a sudden little blue screen came up, all i had time to read was something about video drivers update,then computer shut down,now when i start up all i get is black screen,nothing else not even logo screen,i am certain this is not hardware problem as everything has been running perfectly,its something to do with the updates,unfotunately cd/dvd drive is broken so my only option is to do something through USB,only problem with that is i cant get into bios F2 or boot menu F12 to change boot order because screen black,so i need something on USB that will overide the bios/boot,also tried pressing F8 and nothing,but when i do start up everything sounds fine,fans,cpu,its just screen
Im having an issue with my computer. I was playing on my computer yesturday and everything was fine until this morning when i turned it on. At first, it would log into windows but everything was slow, windows security center services was off (coulnd turn it back on), i coulnd open firefox. I then started it up in safe mode and ran Avast full scan (nothing found), ccleaner, and malwarebytes (nothing found)I then tried to restart it in normal mode and now i got a black screen with a movable cursor after welcome screen.
I was having some problems with my computer. Seemed like it had a minor virus that my Norton wasn't getting rid of. I have all my files backed up so I decided to start with a clean slate and just restore my computer back to factory settings.i have a Dell Inspiron laptop. I performed the Dell DataSafe Restore and Emergency BackUp. I followed all the instructions and everything went fine. It told me it was successful and to restart the computer. I restarted and now Windows 7 will not work.i turn my computer on and a screen comes up that says "Windows Error Recovery" it gives me two options to "Launch Startup Repair" or "Start Windows Normally"... Starting normally just sends me backwards. I tried the Start Up Repair and it begins to run and then I get an error that it can not repair. There are some problem details/signatures if that is helpful but I don't understand them.I can't run in safe mode. I never made a set of recovery discs, I only have the disc the computer came with (drivers and software installation).
So the SMART program has warned me about an imminent hard drive crash for a while. Yesterday Windows was installing updates when my dad closed the laptop lid, when I come home afterschool today, I open the lid and it is frozen. Windows warns not to power off during the updates but since it is frozen I have no choice so I power it off. I have constantly getting BSODs, and have to do a system restore everyday so I was not too worried when it wouldn't start up. So i hit f11 when i turn on my computer and it takes me to the HP Recovery Manager, HOWEVER this time the option to do a System Restore was greyed out and I can't click it! I don't have working recovery CDs so what can I do about this?? My new hard drive is also coming in tomorrow, but i won't be able to replace my failing hard drive when my Pc can't even start up now, and I can't do a system recovery to fix it...
My friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..
Black Screen with cursor? When I switch my laptop on it comes up with a black screen with just the cursor in the top left, this happens before I get to any login screens etc, It's like its wanting to boot a CD but there;s no CD/DVD in the rom! Even when I have put one in, it still hasn't worked..I've looked on lots of forums but none have helped. The only thing that works is F2 that takes me to InsydeH20 Setup Utility & F12 Boot menu.But they dont help! I've tried the usual F8 for safe mode but no such luck, nothing happens, still the same black screen with cursor!
I relocated my 500gb hdd to insite. Before i had it as exernal hdd. But i get black screen when i start my pc. I get even if i remove it.in black screen here is also flashing "_". When i installed Windows 7 i didnt have it coneted witht pc. Sorry if here is some miss spells using mobile to write.
When I start up my computer I have a black screen show up.... I then have to choose between two windows 7 which are highlighted....
I can enter down and go to safe mode or other options. I do not know why this is happening on each start-up.
I think perhaps there are still two copies of the windows 7 Operating system on the computer. I had to do a reinstall and I assume one was not removed.
I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't it automatically set them?
I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]
I recently ran into frustration trying to save or make new any files in the root C: directory, with Windows7 Home Premium being set by default, of course, to not allow this. I did a cursory skim of some information online about changing these settings, and made some changes a bit hastily. Specifically, for the C: drive I took ownership of every subdirectory and gave my account full permissions under security. Annoyingly, this didn't fix the original issue of saving to that drive (which I no longer care about anyway), and it caused (at least) two new problems. Now my start menu has far fewer listings than it used to have; I imagine some programs were listed in it based on the previous permissions. I tried to do a system recovery, both through the OS and with a recovery disc, and that does not work either. It lists restore points, but after restarting it says that the restore was unable to complete.Can I fix the permissions and ownership of just the restore directory and program components, enough to run one, and revert?Or, failing that, is there a way to undo recent ownership changes made? I poked around in the Event Viewer, but it's not laid out very clearly.It's ok if it's not possible or easy to do it this way; I can grab just my vital files and completely reinstall Windows if it's absolutely necessary, but it seems excessive. I doubt the system restore files are corrupted. More, let's say, confused.Let me know if you need any of the error message codes. Somehow they never seem useful. Screenshots forthcoming.
Sometimes when I turn on my computer, the screen will turn on as usual, and there is like a cursor that blinks in the top left corner of the screen, again, as usual. However, it will sometimes stop, and stay on this screen for upwards of a minute or more. The laptop sounds like it's still working, as the fan is going pretty fast and everything sounds like it's spinning, however it doesn't show anything on the screen. After around the minute duration, the screen will go black and the normal boot up process is proceeded with. From what I've read of other people, they can't even get past this screen, which is why I think my problem is slightly different, or the same, just not as severe. Does my problem also sound like it's the MBR, as indicated by other people's questions on the Internet?
If so, is there any easy way to repair it without having to use a windows 7 disc, as I have a laptop and didn't get a disc with it...
my system crashed yesterday due to gpu overheating. now it boots till windows animated logo but at the point right when welcome screen usually comes there is nothing now but a moveable mouse cursor on a completelly black background.now i have following stuff to get back to normal: two very old restore points and a recently created macrium reflect system image but no repair disc. i will be very happy, if there is a way to use the image since i know that some of you prefer macrium reflect insted of microsofts system image solution. unfurtuntelly my restauration points are way to old (april 2011).
Today I tried to boot up my laptop but I am stuck at a blinking cursor on a black screen. To make matters work my keyboard doesn't work either so I can't use F2 or F12 before it boots to the black screen.
My promblem is, I shut down my computer earlier in the afternoon yesterday. I come back and turn it on and after running a minute or two, the fans are going like crazy and screen goes black, monitor goes to sleep. I manually hold down the power button, restart and choose the option to repair. Once again, after a minute or so fans start running hard, blacked out screen, monitor goes to sleep.My husband has tried F8 and we've tried going back to a restore point. It will start and sound normal, but when the fans start to run hard we know the screen will go black.Opinions from various people I know and from websites are stating it's my ATI Radeon graphics card. We've even tested the RAM, yet within those two minutes after start up, monitor goes black and states no signal or it's sleeping. We've also tried numerous monitors, just for sake of process of elimination.
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
