I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't it automatically set them?
View 1 RepliesFollowing the windows updates this wed, my pc wouldn't even start from a system restore.It was maybe heading that way as it was taking 20 minutes to boot up - despite 8 Gb RAM to help it along.I think one of the problems may be that it has never seemed top do many restore pointsd and there was only one choice for before the updates but even that didnt work. Now setting about the hours of work working out how to restore files from Livedrive.First thing I notice - can't set the time to 24 hour clock (12 hr clock irritates m,e). Despite going into setting and chhoosing the capital HH for hours it still stays as 12 hour clock.
View 6 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI am using a Lenovo Y450 Ideapad. When I turned on my laptop one morning, windows 7 refused to start up. After starting off with the initial Lenovo start up screen, a second screen of 'Loading Files' appears. It then goes into Startup Repair. After attempting to repair, a message appears stating that Startup cannot repair this computer automatically. It cannot repair and the only solution is to restart the system and the same cycle repeats. I have read some comments about using F8 and F2 but there are also no restore points (which is surprising) or any image points. I have important data and I usually back it up but havent done so in the last couple of weeks due to work. I am hoping that I can at least get the data out. Also, I do have a Windows 7 CD.
View 14 Replies View RelatedWhen I had XP,there was a separate folder containing System Restore Points. Has win 7 Home Premium got anthing similar? If so where do I find it?
View 13 Replies View RelatedWhy are my Windows system restore points disappearing?I am having problems with my system restore points in Windows 7. I create the restore points, but when after I shut down my PC, they are gone. This is happening with all restore points that the system creates also, such as when it installs updates. I have tried everything suggested online. I made sure that system restore is on, I checked the service, and I set volume shadowing to automatic. Why are Windows system restore points disappearing?
View 29 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View RelatedThis tutorial will show you how to delete the System Protection restore points in Windows 7.
View 0 Replies View RelatedIn my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies View RelatedIt seems my Win7 system is only retaining the last restore point created.I have configured it to save files and settings, and use 5% (5+gb) of available space (Win7 installed on a small partition for now). I can never see more than one available restore point even after ticking the "Show more restore points".
View 9 Replies View RelatedWhen I open system restore and click more restore points...I get about 60 different restore points dating back to last June.In CCleaner...theree are only about 10 dating back to last week ?Are these 5 dozen restore points a problem and is there a way to get rid of them without losing all recent restore points ?
View 4 Replies View RelatedI get this message when trying to do a system resore "No restore points have been created on your computer's system drive. To create system restore point open System Protection.I have checked that system protection is turned on and the option selected is "Restore system settings and previous versions of files".I have also set the maximum Usage to 30GB. I have tried to create a couple of restore point and it goes through the motions OK but on checking find that none have been created!I have AVG 2012 fully updated and have run a full scan also have the latest Malwarebytes installed and ran a scan with that.
View 5 Replies View RelatedHaving just had en error where I get 'non nsystem disk' message (now solved, I discovered in the process that there were no system restore points since January. I have been in task scheduler and it is set to create one on boot and one at midnight
View 5 Replies View RelatedDoes Running Defrag (Windows 7) modify or impact established Restore Points?
View 2 Replies View RelatedI own a 4GB Thinkpad SL510 laptop, running Windows 7 Pro 64-Bit w SP1 installed.Lately, I have noticed that my System Restore points disappear. When I open SR and look for restore points, none are there.To test this,I create one and it creates successfully. I go back and check after a while....and it's GONE. There is no apparent pattern of WHEN they disappear. Sometimes they go after a re-boot, sometimes they stay around for a day or so, then disappear. Sometimes they go away while the computer is still on.I would guess that this started about 1 week ago...at least that's when I first noticed it.There is a common error in the event log which I attached here. This seems to coincide with the time I no longer have restore points.The shadow copies of volume C: were aborted because of an IO failure on volume C:.I increased the amount of space for system restore to 40GB (which should be more than enough...this is 20% of my C Drive. I used to have this at 10% with no problems in the past.I've scanned for viruses and nothing comes up.I also ran CHKDSK C: /f /r and I found 4kb with bad sectors but no other areas.
View 5 Replies View RelatedI noticed my restore points were being deleted for some reason and I went to the System restore settings of my computer, and being oblivious to what I was looking at I confused my recovery drive with my C: and I turned it on and gave it a gig of disk space usage. After I realized I was configuring the wrong one I went back turned it off and deleted restore points but It won't let me put the max usage back to zero it will only let me keep it at 2% (320.00MB).Is this going to cause any problems or is it fine?
View 1 Replies View RelatedI would like to do a system restore, but when I try to do so (system protection/system restore), it tells me that "no restore points have been created on your hard drive".
2 weeks ago I successfully did a system restore, and I have not changed any settings since then. My recovery partition is still in place, the disk manager says the recovery drive has 8 GB out of 15 GB free. Could the restore point be in my recovery partition, but for some reason Windows isn't seeing it? How would I view the recovery partition to check?
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies View RelatedI am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies View RelatedI am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
How to Delete System Protection Restore Points in Windows 7 ?
View 0 Replies View RelatedI am losing my system restore points and my computer is not creating them on its own.
View 5 Replies View RelatedI had reason to check my System Restore function today and found only 3 points to choose from. One from July 15, 2012, another from 2011 and the last from 2010. Obviously two of them are worthless. I understood that a new restore point should be added each week, or at a major change of some sort. How do I change this so that more points are added as time goes by? One each week would be just fine. I can't find this option in Win 7 as I recall was available in XP.
View 9 Replies View RelatedI made a recovery disk from another laptop which allows me to go into the system recovery options. I chose the first option use recovery tools the can help fix problems starting windows. I selected window 7 and then a window came up saying "add drivers". it says insert the installation media for the device and click okay to select the drivers. However I am starting from a recovery disk and I'm not sure where to find the drivers it is asking for.
View 9 Replies View RelatedI wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
View 3 Replies View RelatedI was fixing a laptop that was having several issues, (special keys wouldn't work properly, internet explorer would crash, PDF files wouldn't open, etc) and I found a suspicious file (C:User<user>AppDataRoamingElofenmoma.exe) that was booting on startup. Virustotal hit me with only 3 results for a trojan, which is actually quite low, but this file was clearly the problem, the details seemed to be in russian and it's Regedit entry was random letters.
So I cleaned all evidence of this file and now the keyboard works properly, but I'm still having problems with executable. Most of the times when I open a program nothing shows up, yet the process is running, after opening it 3 or 4 times one window finally opens, but there's still 3 or 4 idle processes before it with no window in sight. Some times when I force close the first process all the other windows suddenly show up. I also noticed that the processes for setups, chrome, internet explorer tend to stay idle even after closing them normally (in the program itself, manually closing the process works).Usually I would just format the PC, but this is a very complicated PC to format, the owner has tons of certificates that he needs and most of them he doesn't even remember how to reinstall them again.
Anyways, I am fixing a computer for a friend and his computer wouldn't start up properly. It would start up with the Windows 7 Boot logo and then go to a black screen with the mouse hanging there. I could move the mouse but nothing else would work including ctrl+alt+delete.I then used my Windows 7 usb pen backup install to install Windows 7 on the laptop and it would still hang at the black screen.I then used a program called killdisk, put it onto the usb pen and made it bootable, and it formatted everything off the hard drive. I then went to start the computer and it was still starting with the Windows 7 logo but just stayed there.I then used my Windows 7 off my usb pen and it didn't work. I also tried my Windows 7 disk and it didn't work.I faced this problem on this laptop before but it had Windows Vista on it (which was about 8 months ago) and put Windows 7 on it (8 Months ago).
View 3 Replies View RelatedI was having some problems with my computer. Seemed like it had a minor virus that my Norton wasn't getting rid of. I have all my files backed up so I decided to start with a clean slate and just restore my computer back to factory settings.i have a Dell Inspiron laptop. I performed the Dell DataSafe Restore and Emergency BackUp. I followed all the instructions and everything went fine. It told me it was successful and to restart the computer. I restarted and now Windows 7 will not work.i turn my computer on and a screen comes up that says "Windows Error Recovery" it gives me two options to "Launch Startup Repair" or "Start Windows Normally"... Starting normally just sends me backwards. I tried the Start Up Repair and it begins to run and then I get an error that it can not repair. There are some problem details/signatures if that is helpful but I don't understand them.I can't run in safe mode. I never made a set of recovery discs, I only have the disc the computer came with (drivers and software installation).
View 6 Replies View RelatedSo the SMART program has warned me about an imminent hard drive crash for a while. Yesterday Windows was installing updates when my dad closed the laptop lid, when I come home afterschool today, I open the lid and it is frozen. Windows warns not to power off during the updates but since it is frozen I have no choice so I power it off. I have constantly getting BSODs, and have to do a system restore everyday so I was not too worried when it wouldn't start up. So i hit f11 when i turn on my computer and it takes me to the HP Recovery Manager, HOWEVER this time the option to do a System Restore was greyed out and I can't click it! I don't have working recovery CDs so what can I do about this?? My new hard drive is also coming in tomorrow, but i won't be able to replace my failing hard drive when my Pc can't even start up now, and I can't do a system recovery to fix it...
View 9 Replies View RelatedI have Windows 7 Home Premium, 64 bit system, over 250gig free on Hard drive and 8 gig RAM. For whatever reason, This Windows 7 does not go back on earlier RESTORE points that I know I had set months ago....Is this a general problem with windows 7, or is there something that is not configured correctly, for Windows 7 to retain prior months restore points. What can I do to ensure restore points are created and kept for an extended period of time, given that I have plenty of Hard Disk space?
View 5 Replies View RelatedI have dual boot, win 7 and win Xp. Every time i use Win XP, my restore points on win7 are missing. I changed the drive letter on win 7 partition in win Xp with diskmgmt.msc, but still is the same problem.
View 3 Replies View Related