Whenever Live-Boot Or Windows Installation, Screen Goes Black
Sep 15, 2012
My system runs completely fine, but whenever I try to LiveBoot my screen goes black after about 5-10 minutes. Same goes with when I try to do a daily Windows Format/Installation and Safe Mode.
i have recently ordered a lappy ASUS K53SV-SX520D from flipkart. the specifications are i5 second Generation processor. it came preinstalled DOS. i tried to install the windows 7 ultimate 32 bit. and i installed successfully. But some problem arose i guess the reason is that i created 3 partitions while installations and from Disk Management i created another volume. of the remaining unallocated space.now when i started the lappy m not able to BOOT. its just the blank screen with a blinking curser. i have tried many times but failed. peoplesolve this problem. its a new laptop and m no even able to start it even once.secondly. someone suggested me to delete the partitions while instaling the Win 7 again. i tried that too.. but all the options to delete, format, new, are in gray. i mean m not able to delete those 4 partitions.
I tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know) anyways, everything goes fine until this screen: [URL] after that screen, my screen goes black and I can't do anything. it says nothing on my screen, just black.
I tried to install windows 7 on my laptop (hp pavilion ze5400, old 1 i know)anyways,everything goes fine until this screen:URL] after that screen, my screen goes black and I can't do anything.it says nothing on my screen, just black.
I have an interesting problem where MCE can Find all of the stations in melbourne but will only show live tv for channel 7...which is a problem because i dislike that channel.. and for any other station it shows a black screen. The controls still work and it displays a time status bar that moves but no image or sound comes??? it can also get the guide information for all of them without using the internet.
I'm running Windows 7 on my 17 920 with a ATI HD4650 Graphics card and i'm using a Pinnacle 2001E Dual DVB-T Usb Stick.
Has anyone got some ideas to fix this? or another program i can test the drivers with?
I have been struggling with my old desktop for 4 hours...as i have installed a fresh windows 7 home premium on a new Samsung 500GB hardisk, but soon after the installation when i rebooted my pc it rebooted to black screen which is never ending....i have tried installing Windows 7 Os three times and every time the result was the same. my disk is ok as it doesn't give any error while running check disk utility on it.
i have a MSI A6000 Laptop. Ive been trying to fix this problem for 2 day with 12 hours time and read countless forums but still haven't been able to solve it.
I recently encountered windows 7x64 installation error, where i could not select disk partition to install. ( i formatted and deleted all of the partitions for a clean install). But somehow after running the memory diagnosis i was able to go through the installation. But during the installation on the second time it restarts, my computer gets a black screen when starting.
i cannot access the post screen menu or the recovery option( it is however possible to access the same thing via booting through the USB and selecting the recovery option instead of installing). Also the memory diagnosis tool does not work any more giving an error. The bios options are as follows:
MAIN : Serial ATA [Hard Disk] Serial ATA [ATAPI CDROM] Advanced: PCI Latency timer [64] Legacy USB support [enabled] AHCI Mode [endabled]
installed windows 7 ultimate(tried both 64 and 32 bit) to my pc. but after installation when it reboots for the 1st time, it shows a black screen with the mouse pointer. i waited 1/2 hour but no use.my pc config core2quad q6600, asus P5KVM, 2 gb ddr2 ram, nvidia 9600gt 512mb and 380 gb seagate hd also when i try to boot in safe mode it says that windows have to start normally for the first time.i installed it over xp sp3 by formatting the c drive.i have reinstalled it atleast 6 times but no change.
I've recently purchased a new ASUS computer (N61V I think), it came with Windows 7 Home, however for school the techies will only work with Windows 7 Professional, so thus, I cannot use it at the moment. I went through start, and went to "Windows Anytime Upgrade", purchased the Professional upgrade, confirmed, etc, etc. But for some reason my screen has gone black (I'm using another comp!) and the lights are flashing on and off. This has been happening for 2 hours now, and I'm not sure what to do. It's got a 500GB hard drive (around 470gb left) and I'm not sure why it's having such problems. Very strong internet connection - plugged in- and has been on charging.
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU Nvidia GeForce 7800 or smthng 512mb 4GB ram 2x120GB WD HDz
I'm installing Windows 7 Beta x64 Build 7600 with a 4.7GB DVD but once it gets to the 'finishing installation' part it seemingly reboots (I think?) to continue with the install but the thing is at this point in time for me the screen goes blank and all I see is the cursor which I can move around. If I power it off and then turn it back on the loading screen comes up but when I get to the log on screen the same thing happens again.
The exact same thing happens to me with Vista. I installed it like three times (the difference is on Vista it gets past the install but still won't get past the logon screen so I can never shut down, restarting is fine though for some reason) and I'm being forced to roll back to 64-bit XP which to be honest I really don't want. So far I've detected that it's not the DVDs. It might be the RAM but I replaced both temporarily and that didn't work either.
I have problems entering windows after the first installation of Windows 7 64 bit built 7000.After seconds the welcome (splash) screen appears, the windows suddenly reboot automaticaly.After that, black screen appears with dashes blinking.(Actually, my current OS is Windows 7 32 bit built 7600, but I think it isn't cause of the problems. I have formatted the local drive, in which my current OS was installed, before I install Win 7 64 bit).
I am currently using Vista Home Premium SP1, with a Nvidia GTX 295 and Intel Core i7 920. I purchased the Windows 7 Home Premium upgrade disc yesterday.
Near the end of the installation it does one of its usual auto-restarts. After the Windows 7 loading screen finishes, all i can see is a black screen with a mouse pointer, thats it. Then if i restart it takes me to a screen that says "your upgrade failed, restoring your previous version of Windows". I have tried every hint i can find, 9 installs later, and still no closer to finishing.
I am trying to do an upgrade with a computer I previously had Vista Ultimate on. I choose to do a clean install and formatted the hard drive with the 7 installer. The installation begins normally, but when it reboots and says "Starting Windows" a black screen comes up. I am able to see the mouse cursor and mode it, but nothing else occurs.
The hard drive light comes on periodically, but nothing happens even if I leave it sitting for several hours. If I restart the computer, it gives me the option to start in safe mode, then says 7 can not load in safe mode and reboots to the same black screen.
I have tried installing multiple times with the same result. I re-loaded Vista and tried to do an upgrade, but it tells me Vista Ultimate can not be upgraded to 7 Home Premium and I must do a clean install.
The upgrade advisor told me I should have no issues and Vista ran fine.
Any ideas what could be causing this black screen upon installation?
DVD disc boots up, Windows loading files...then Microsof Corporation loading screen comes up, and after that black screen, and nothing happens, everything is working but nothing happens. Tryed several times, but still the same thing happens. Any suggestions?
I get it to boot from the DVD and it gets all the way to the final step {Completing Installation} then the screen goes black and hasnt moved from it for like 2-3hrs..
I thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
My problem is that during Windows 7 Ultimate installation (right after the first reboot) the screen goes black! The monitor does not loose the signal because I can still see the green solid LED on it. I have run into this issue four times with four different PCs with four different configurations. The only common denominator here is the type of video card (I say the type of video card because this has happened with different brands and models of video cards). This has happened only with video cards that have DVI, S-Video and VGA ports, but only on the ones that have the VGA port that PLUGS through a little ribbon cable to the card it self. I have successfully installed Windows 7 on systems that have video cards with the same ports but the VGA port is solder to the card. It seems that after the first reboot and after it displays "Starting Windows", Windows thinks that the active port on the video card is the DVI port and NOT the VGA port that has been using up until that point! I know this because I have used a DVI to VGA adapter right after the screen goes black and there it is! the setup process waiting for my input (create a user)...
Have Windows 7 on my laptop and it's been working OK so far. When my WinXP install on my desktop started acting wonky and refused to launch except in safe mode, I figured I'd go ahead and trade up to Windows 7 since I'm a student and can get a copy for $20.I pulled all the data I wanted onto a USB drive, then started installing. Did a clean custom install; deleted both previous partitions and made a single new partition for it to install on (plus the mandatory 100MB partition). It chugged along and seemed to be progressing nicely: Copying files... check. Expanding files... check. Installing features... check. Installing updates... check. Completing installation... VIDEO MODE NOT SUPPORTED. Suddenly my monitor doesn't understand the output it's getting. The system doesn't see the keyboard either: caps lock & num lock buttons don't toggle their associated lights. So I gave it an hour. Still nothing. I figured it must have locked up, so I power-cycled it, hoping it had completed the installation. No such luck, I get an error message saying the installation ended unexpectedly and I have to restart. So I restart. Same thing happens.
During the portion of the install just before the final reboot, while it says, "Completing installation..." the screen goes black to show a single blinking cursor in the top left for a second or so (like it kicked out of the OS), then goes black & says video mode not supported, like its receiving invalid input from the computer. I connected another monitor and instead of saying video mode not supported, it just shows a black screen, like its getting good output from the computer but the computer just wants to show all black (this monitor does have a 'video mode not supported' equivalent screen, which it's not using in this case; that's why I think it's getting good output from the PC). I know the system isn't reaching the actual reboot, because it doesn't do the 10-second countdown before automatically rebooting, it just jumps straight to the black screen.
Machine Stats Processor is a 3.0GHz Core 2 Duo. Has 2GB of RAM. GPU is an Nvidia 8800 GT. Monitor is a Dell 2007WFPb. Disc I'm installing from says "Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media".
Current Things to Try Install WinXP and give Upgrade Advisor a shot. Current Operating System, pre-install- Never multi-booted before, not planning to start now. Current Hardware- 1 SATA hard drive- 1 SATA DVD drive- 1 USB external drive, but not connected during install- Didn't see any disks with an exclamation point or yellow triangle - Not a new HD; as I said, it's one I was using before, I deleted the two partitions I was using with WinXP, made a single new partition (plus the mandatory 100MB one), and formatted the new one using the installer's Disk Manager Windows 7 installation details - Disc says Windows 7 Ultimate 32-bit x86 Upgrade: Pre-existing OS License Required (Product Key Required) - September 2009 Systems Student Media ... I saw on various forums before I started that Upgrade versions could do clean new installs as well - 32 bit (x86) version - Bought a legit DVDInstallation Media- From a DVDThe procedure and speed of burning the ISO to DVD has been the most frequent cause of installation failure- Bought itOther- No overclocking?
So i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
When doing a regular log on where the desktop should be located at i only see a black screen.I can log on in safe mode w/ networking and i can get to the desktop and icons located on the desktop that way.I have not installed any programs in the past 2 month on the computer.The web sites thatPenn State Industries | Pen Turning | Pen Kits | Dust Colland Shipping, Freight, Logistics and Supply Chain Management from UPS this is the total.None of the NO NO web sites cause you get viruses and other bugs.If i do not know who a e-mail is from it does not get opened mark it as spam & delete it
windows 7 on my laptop (toshiba sat.) will not boot it goes to the [COLOR=blue !important][COLOR=blue !important]toshiba[/COLOR][/COLOR] screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
I have a major problem with windows 7 home premium which was an upgrade over vista. A while back I started having problems when I ran windows update. Almost every time it ran and I rebooted later all I got was a black screen with the mouse curser. When I rebooted a second time I got my desktop but none of my programs would load. I would get the spiral and then it stopped. The hard drive was chugging away. I usually got around this by going back 2 or 3 systems restores and then it worked fine. I recently used revo uninstaller to get rid of a program and to clean up the registry. It created a system restore and then I rebooted. When I rebooted I got a message of some disk problems and ran 3 corrective actions (I don't know what they do) including chkdsk and then rebooted. I got my desktop again but nothing loaded.
I did safe bootup to get to the system restore but they had all disappeared. Apparently either the disk or registry got corrupted. I can go on the internet in safe mode or load programs but can't print. I would love to be able solve the problem why programs can't load so I wouldn't be dependent on systems restore and get my laptop running normally. It is a Dell inspiron with intel core 2 duo
It worked Ok. Originally installed with Home Premium disk. Upgraded to Pro version online--no disk. It worked until I changed the secondary drive to an old one to get data from it. Only get black screen. Even put the original secondary drive back in. Still no go.
i bought a external hard drive and really wanted to have windows on it, so i installed windows 7 with some program, ok the problem is when i start the windows just dont boot, just appears a black screen with a blicking cursor, i think it is because mbr or boot are damaged because i removed ubunto and grub recently and i fixed it with partition wizard, i eard too i can repair this with windows re but it dont work on external hard drives
When Win 7 pro (32 bits) boots up, as we all notice, there is a second or so when there is a black screen, w/ just your mouse cursor, and then you are supposed to see the blue Welcome screen.
In the past 2 months, my computer is stuck at that black screen about 7 times, as recent as tonight. I've done a clean install w/ the latest Nvidia driver 2 weeks ago. No change. It looks like win 7 Pro is stuck there and waiting for something as my hard drive light blink on and off.
So, I would do nothing, or sometimes I would disconnect the HDMI port connects to my 3rd PC Panel (see below), and I would wait for 5 min. or so. Then my login logo shows up, I click it, and I got to windows.
Now, w/ the normal boot up, I don't have that login logo, win 7 pro will simply boot up directly to win 7 main screen after I turn on the computer.
Some1 said this could be IRQ sensing problem of the video card. But so far, I have no proof on that 1 way or the other: All these started about 2 months ago, at or near the same time when the Sharp LED TV technician came to my house and upgraded all the firmware, including the firmware that consumers can't download, to my Sharp LED LCD TV, as the power button wasn't working.
Then in the past 2 mth., every time I turned on my LCD TV, which is connected to my computer as the 3rd screen via a DVI to HDMI cable, Win 7 senses this 3rd panel, and the screen went black and back on again. This isn't the way it used to be: as it WAS NOT SWITCH TO THE HDMI PC PORT.
My Sharp LCD has 4 HDMI output. Tonight for e.g., I was on Input 2, which is satellite, but as soon as I turn on the Sharp LCD, win 7 senses this 3rd screen, and the screen do that black screen then back on again w/ the music charm note.
This was not the way it used to be, in the past yr., w/ this same set up, win 7 only went to the black screen and back on when I switch to Input 1, which is PC at 1920x1080. And I don't know if the above is related to the boot up lock up or not.
I just finished a new built and I ran into a problem after installing Windows 7. I was setting up some some drivers the PC randomly went to a black pixelated screen and it sounds like the CPU fan started running on max speed. Now, every time I turn it on the fan is still running on max speed and the screen goes black soon after the desktop starts up. I know it could be a hundred things but it be huge if you guys have any information on this issue. One last thing is I switched the main graphics card back to the integrated one and it seems to be running okay but I only had it on for a few minutes because the CPU fan is still running on MAX.
I installed Windows 7 on my desktop pc & when it's done the first stage it reboots. Then it takes me to the part where it says 'Completing installation...' and it hangs at that for a minute or two. Then the screen goes black and i dont know
I just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.