Windows 7 Pro, 32 Bit Stuck At Black Screen During Boot Up
Jun 26, 2012
When Win 7 pro (32 bits) boots up, as we all notice, there is a second or so when there is a black screen, w/ just your mouse cursor, and then you are supposed to see the blue Welcome screen.
In the past 2 months, my computer is stuck at that black screen about 7 times, as recent as tonight. I've done a clean install w/ the latest Nvidia driver 2 weeks ago. No change. It looks like win 7 Pro is stuck there and waiting for something as my hard drive light blink on and off.
So, I would do nothing, or sometimes I would disconnect the HDMI port connects to my 3rd PC Panel (see below), and I would wait for 5 min. or so. Then my login logo shows up, I click it, and I got to windows.
Now, w/ the normal boot up, I don't have that login logo, win 7 pro will simply boot up directly to win 7 main screen after I turn on the computer.
Some1 said this could be IRQ sensing problem of the video card. But so far, I have no proof on that 1 way or the other: All these started about 2 months ago, at or near the same time when the Sharp LED TV technician came to my house and upgraded all the firmware, including the firmware that consumers can't download, to my Sharp LED LCD TV, as the power button wasn't working.
Then in the past 2 mth., every time I turned on my LCD TV, which is connected to my computer as the 3rd screen via a DVI to HDMI cable, Win 7 senses this 3rd panel, and the screen went black and back on again. This isn't the way it used to be: as it WAS NOT SWITCH TO THE HDMI PC PORT.
My Sharp LCD has 4 HDMI output. Tonight for e.g., I was on Input 2, which is satellite, but as soon as I turn on the Sharp LCD, win 7 senses this 3rd screen, and the screen do that black screen then back on again w/ the music charm note.
This was not the way it used to be, in the past yr., w/ this same set up, win 7 only went to the black screen and back on when I switch to Input 1, which is PC at 1920x1080. And I don't know if the above is related to the boot up lock up or not.
View 5 Replies
ADVERTISEMENT
Dec 6, 2011
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU
Nvidia GeForce 7800 or smthng 512mb
4GB ram
2x120GB WD HDz
View 3 Replies
View Related
Dec 30, 2011
I just installed a new motherboard into my compaq preserio and when the computer starts up I am greeted with a black screen that says "loading operating system...". When I plug the original motherboard in I am greeted with a black screen, nothing happens after that. I have already installed the new motherboard's drivers but thats was when it crashed. I ran a diagnostic on it and it gave me error BIOHD 3, which I believe means that the drivers couldnt be found. So I am stuck at a stand still until I can find a fix.
View 2 Replies
View Related
Jan 7, 2010
My computer after trying to (stupidly) remove the SPTD driver so Daemon Tools would work. Is stuck on the black loading screen, even when loading from safe mode.
I tried removing the sptd driver, but only took out 1 of 2 files, the other not being removed properly. So i restarted (which worked) and restored my computer to an hour before i tried any of it. I could only log on in safe mode and i checked and saw that both drivers were there. So i turn off the computer and it was fine.
However, i tried to turn on the computer again later, but it got stuck on the black screen with just the mouse. I held the power button and retried,in safe mode, this time getting to my computer background, with nothing loading. I tried yet again and only got black screen. It says all my drives loaded and everything, including sptd, but nothing is loading.
What is wrong with my computer? I am not that good with them and cannot open it up without a lot of help if it is a hardware problem
View 3 Replies
View Related
Oct 2, 2012
it started over a year ago when I started to get random BSOD messages, after no specific update, installation, or hardware change whatsoever.those usually included "IRQ_LESS_OR_EQUAL". usually after a crash it took some startup attempts to boot successfuly.
more recently crashes followed those BSOD's:
"BAD_POOL_CALLER"
"BAD_POOL_HEADER"
"BAD_SYSTEM_CONFIG_INFO"
since the latest crash, the computer is failing to start - after widows logo appears, I get a black screen with a cursor. NO control afterwards - Ctrl+Alt+Del doesn't work and I all I can do is restart.
I tried:
1. safe mode (all kinds) - still get the black screen with no response
2. low resolution video mode- same
3. Windows Restore, both from the boot options dialog and from the WIN7 installation disc boot - it doesn't run, I get an error message ("the application referenced memory......... .....memory can't be read" )
4. memory check, it ran but I cant access the results.
5. Windows system files checker ('sfc'), via the repair tools command prompt - it doesn't start, says there's a startup repair pending so startup - yet there isn't
6. reset BIOS settings - nothing before the current trouble, at times, I also tried:
- reinstalling drivers for Graphic card, Network card and motherboard
- cleaning dust in the CPU cooler
- fastening connectors
- clean format (that was a long time ago but blue screens appeared even shortly afterwards)
nothing worked....
specs:
cpu: Intel I7
motherboard: Asus P7H55-M PRO
Graphic card: PNY nVidia Quadro 580
Windows 7 pro
View 8 Replies
View Related
May 3, 2012
I have a dv7 notebook with Win 7 Home Premium installed on it. Everything is running fine, except a couple of days ago the notebook began to take too damn long to boot up when restarting or just when powering it on.
I noticed it gets "stuck" on a black screen, just like a blank DOS screen, for about 2 minutes before booting up Windows.
I have tried downloading new BIOS from HP website, resetting the BIOS settings, changing the boot order but nothing really works. It always stays on the black screen for around two minutes and then Windows boots up normally. No text is shown, nothing at all.
View 9 Replies
View Related
Oct 21, 2012
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
View 4 Replies
View Related
Feb 13, 2011
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies
View Related
May 20, 2012
I built a new gaming PC about a month and a half ago and its been running fine up until now. I turned it on a couple of days ago and Win 7 was freezing up. The mouse cursor was a blue wheel and I couldn't click or do anything. I couldn't even access the command line and ctrl+alt+del didn't work either. At this point it did boot up in safe mode. I powered it down and now it won't boot past BIOS. I reseated everything and checked all the connections and everything seems good.
View 3 Replies
View Related
Jul 13, 2011
advent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies
View Related
Jun 24, 2011
I've an hp mini 110 with windows seven starter and I want to make a dual boot 7/XP...I downloaded the 32bit version of the sp3 XP and following this guide: Dual Boot Installation with Windows 7 and XP I installed on a new partition...(I didn't put the sata drivers cause when I started the usb on the boot xp started to install without problem)..after xp finished I booted but I get this error "windows could not start because of a computer disk hardware configuration problem.."...when I only can see XP and It can't be opened...I tryed with the 7-system-recovery on the usb to make recovery and put these strings on prompt
bootrec /FixMbr
bootrec /FixBoot
bootrec /RebuildBcd
but nothing,same error!!!I thought it was a sata driver issue so I downloaded the drivers and opened on the system recovery through usb but it says they can't be installed....so should I slipstream in the xp iso before install xp??
View 5 Replies
View Related
Dec 10, 2010
Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
View 1 Replies
View Related
Sep 6, 2011
When doing a regular log on where the desktop should be located at i only see a black screen.I can log on in safe mode w/ networking and i can get to the desktop and icons located on the desktop that way.I have not installed any programs in the past 2 month on the computer.The web sites thatPenn State Industries | Pen Turning | Pen Kits | Dust Colland Shipping, Freight, Logistics and Supply Chain Management from UPS this is the total.None of the NO NO web sites cause you get viruses and other bugs.If i do not know who a e-mail is from it does not get opened mark it as spam & delete it
View 2 Replies
View Related
Nov 1, 2012
windows 7 on my laptop (toshiba sat.) will not boot it goes to the [COLOR=blue !important][COLOR=blue !important]toshiba[/COLOR][/COLOR] screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
View 1 Replies
View Related
Sep 15, 2011
I have a major problem with windows 7 home premium which was an upgrade over vista. A while back I started having problems when I ran windows update. Almost every time it ran and I rebooted later all I got was a black screen with the mouse curser. When I rebooted a second time I got my desktop but none of my programs would load. I would get the spiral and then it stopped. The hard drive was chugging away. I usually got around this by going back 2 or 3 systems restores and then it worked fine. I recently used revo uninstaller to get rid of a program and to clean up the registry. It created a system restore and then I rebooted. When I rebooted I got a message of some disk problems and ran 3 corrective actions (I don't know what they do) including chkdsk and then rebooted. I got my desktop again but nothing loaded.
I did safe bootup to get to the system restore but they had all disappeared. Apparently either the disk or registry got corrupted. I can go on the internet in safe mode or load programs but can't print. I would love to be able solve the problem why programs can't load so I wouldn't be dependent on systems restore and get my laptop running normally. It is a Dell inspiron with intel core 2 duo
View 1 Replies
View Related
Jan 17, 2013
It worked Ok. Originally installed with Home Premium disk. Upgraded to Pro version online--no disk. It worked until I changed the secondary drive to an old one to get data from it. Only get black screen. Even put the original secondary drive back in. Still no go.
View 5 Replies
View Related
May 10, 2009
So I turned on my computer today which has no OS on it because I wanted to do a clean install and it is not seeming to go post the boot screen. It won't even let me into the BIOS info. Anyone know whats going on?
View 7 Replies
View Related
Jun 5, 2012
i bought a external hard drive and really wanted to have windows on it, so i installed windows 7 with some program, ok the problem is when i start the windows just dont boot, just appears a black screen with a blicking cursor, i think it is because mbr or boot are damaged because i removed ubunto and grub recently and i fixed it with partition wizard, i eard too i can repair this with windows re but it dont work on external hard drives
View 6 Replies
View Related
Aug 2, 2012
I just finished a new built and I ran into a problem after installing Windows 7. I was setting up some some drivers the PC randomly went to a black pixelated screen and it sounds like the CPU fan started running on max speed. Now, every time I turn it on the fan is still running on max speed and the screen goes black soon after the desktop starts up. I know it could be a hundred things but it be huge if you guys have any information on this issue. One last thing is I switched the main graphics card back to the integrated one and it seems to be running okay but I only had it on for a few minutes because the CPU fan is still running on MAX.
[code]...
View 1 Replies
View Related
Aug 27, 2012
I installed Windows 7 on my desktop pc & when it's done the first stage it reboots. Then it takes me to the part where it says 'Completing installation...' and it hangs at that for a minute or two. Then the screen goes black and i dont know
View 2 Replies
View Related
Sep 9, 2010
I just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies
View Related
Mar 18, 2011
I have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies
View Related
Mar 18, 2012
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
View 3 Replies
View Related
Jul 5, 2012
I was having problems booting Windows 7, so I attempted to use the Bootrec.exe tool to rebuild the my BCD. But I screwed that up big time.Now I get the following error message on a black screen when I attempt to boot up: Windows Failed to start. A recent hardware change or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.The Windows Boot Configuration Data file does not contain a valid OS entry.As far as I can tell, the hard drive is operational. The BIOS detected it and it passed the diagnostics test.
View 3 Replies
View Related
Sep 15, 2012
My system runs completely fine, but whenever I try to LiveBoot my screen goes black after about 5-10 minutes. Same goes with when I try to do a daily Windows Format/Installation and Safe Mode.
View 4 Replies
View Related
Mar 5, 2011
Alright, so my Acer laptop has been working fine with no problems at all since i bought it about 2 years ago. This was until yesterday where i turned it on, just to see no login screen, only a black screen with a moveable cursor
I tried ctrl+alt+delete didn't work
I tried to repair windows with the repair disc through a USB, didnt work. It said that windows couldn't automaticly fix the issue, in the log it said:
Problem Signature:
Problem Event Name: StartupRepairOffline
Proglem Signature 01: 6.1.76900.16385
Proglem Signature 02: 6.1.76900.16385
Proglem Signature 03: Unknown
Proglem Signature 04: 0
Proglem Signature 05: Autofailover
Proglem Signature 06: 8
Proglem Signature 07: BadDriver
I tried to restore to previous system points, but didn't have any for some reason
When i boot from the repair disc, i'm able to get into the menu where i chose OS, and found out that when i press Load Drivers, i'm able to access my HDD, where everything seems to be intact, already copied some important work stuff to a seperate HDD if *** won't get working
View 9 Replies
View Related
Jan 28, 2013
I turn on my computer to eventually get a black screen with white cursor that will move around. The Toshiba insignia comes up beforehand as well as the windows four square icon then it is to this black screen and white cursor. I cant seem to get the computer to boot up from Windows 7 installation disc. Sometimes I also get a BOOTMGR image is corrupt. The system cannot boot. message as well. I imagine there is a solution of sorts as it seems many people have had a similar problem. I have a freind who maybe able to fix it seeing he is a computer programmer but that is not until the end of the week.
View 1 Replies
View Related
Jun 4, 2011
I couldn't find another thread relating to the exact same problem, as they have hijackthis logs etc. whereas I cannot get onto my laptop to do anything at all.I am running a Dell Studio 1555 with Windows 7. When I turn it on I can hear it boot, but everytime the screen just stays black. I cannot start it in safemode or do anything. It is just blackI can think is that the other day I used CC Cleaner and it did some things to the registry. Otherwise I have not downloaded anything or done anything that should suddenly make it stop working.
View 14 Replies
View Related
Jun 14, 2010
I tried Linux yesterday, and wrote over my previous Windows bootloader files with GRUB.
I later that day (as I could not boot into Windows 7), I deleted the Linux partitions with Windows 7 DVD. Now, after BIOS I just get a white blinking border on a black screen.
I tried
bootrec /fixmbr
Success
bootrec /fixboot
Success
bootrec /rebuildbdc
Success
bootrec /scanos (Total identified Windows-installs: 0)
I also tried the "automatic" systemrepair (1st choice in the DVD menu, with no luck)
View 9 Replies
View Related
Nov 28, 2011
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are:
Motherboard: gigabyte 970a d-3
Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2)
CPU: AMD phenom ii x6 1100t black edition 3 .3ghz
GPU: Sapphire hd 6870 1GHZ
PSU:700watt
OS: Windows 7 Ultimate x64
View 18 Replies
View Related
Aug 22, 2011
My netbook froze on friday night. Try to restart, but was stuck at grey screen. It has asus logo and eee pc written. The options f2 to run setup and tab to display bios post yields nothing. In other words, pressing either button doesn't work. I have removed the battery, pressed the power button without the power cord, put everything back in, tapping f2. So far, no progress. Few times, i try pressing f2 similtaneously as i hit the power button, i got american megatrends screens. Still, none go further. I have this netbook for a little over a year. The warranty just expired a month ago. It is running window 7 starter already installed when i got it at bestbuy. I had contacted asus support, and tried some i mentioned above. I prefer to do this by myself.
View -1 Replies
View Related