My computer after trying to (stupidly) remove the SPTD driver so Daemon Tools would work. Is stuck on the black loading screen, even when loading from safe mode.
I tried removing the sptd driver, but only took out 1 of 2 files, the other not being removed properly. So i restarted (which worked) and restored my computer to an hour before i tried any of it. I could only log on in safe mode and i checked and saw that both drivers were there. So i turn off the computer and it was fine.
However, i tried to turn on the computer again later, but it got stuck on the black screen with just the mouse. I held the power button and retried,in safe mode, this time getting to my computer background, with nothing loading. I tried yet again and only got black screen. It says all my drives loaded and everything, including sptd, but nothing is loading.
What is wrong with my computer? I am not that good with them and cannot open it up without a lot of help if it is a hardware problem
I rebooted my PC after installing the latest version of iTunes, and upon reboot I couldn't get past the motherboard splash screen. I tried removing each stick of RAM individually, I tried removing the battery, but finally it was clearing the CMOS which helped me at least get past the mobo splash screen (after pulling out all of the USB devices plugged in otherwise it would also freeze), but now it gets stuck on the Windows 7 loading screen.
I tried entering the Windows 7 repair function, but it freezes on a black screen (I waited about 20 minutes).
I tried booting into safe mode, but it gets stuck while loading this file: AVGIDSEH.sys
Now since I can't even boot into windows to try to do any kind of diagnosis, I figured I would create a USB drive portable version of Windows 7.
My question is, if I manage to boot into my portable Windows, what kind of tests should I run?
Finally one last question, typically when Windows 7 gets stuck at loading is it hardware related or would a complete re-install fix the issue? At this point I just need to get it back and running I don't care about losing my settings and programs.
Yesterday I woke up to my computer sitting at the starting windows loading screen. I have no idea why it turned off but now every time i try to start it, It sits at the loading screen. I already tried system restore and start up repair. Did it a bunch of different times and the restore worked yet still had the same problem repair did not work. I can get into safe mode, so i tried to do the msconfig way. I did selective start up and disabled all the non Microsoft services. Restarted and It still sat on loading screen. I then opened the desktop up and tried cleaning it making sure all hardware was properly seated. Still no success.
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
restored my windows on my laptop a few weeks ago an last night the laptop just loads to black screen so I switch it off then back on again and it sakes me to do a start up repair this happens all the time and I get up today and it's still doing it any ideas what it could be and how to fix nspecified changes to system configuration might have caused the problem
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
So I booted up my PC today and every single time it would get past the windows loading screen, a BSOD would flash on the screen for a split second and reboot. I tried booting into safe mode and that would not work either. The next step I figured would be to format and do a clean install, but here's the thing... Windows didn't even recognize my partition! It has my other 2 HDDs but not my Windows 7 partition. The HDD in question shows up in BIOS, but not in Windows. So, should I just get a new HDD? Startup Repair didn't work either, as it just hung/froze.
I just installed a new motherboard into my compaq preserio and when the computer starts up I am greeted with a black screen that says "loading operating system...". When I plug the original motherboard in I am greeted with a black screen, nothing happens after that. I have already installed the new motherboard's drivers but thats was when it crashed. I ran a diagnostic on it and it gave me error BIOHD 3, which I believe means that the drivers couldnt be found. So I am stuck at a stand still until I can find a fix.
I have to load the safe mode for installing Steam after a crash. So I entered the advanced boot menu and chose Safe Mode with Networking. It started loading some .sys files. After a lot (I think it was loaded correctly) of .sys files my screen froze and after 3 seconds some weird blue dots appeared and (Left upper corner. Every dot was like 10x30 pixels) after some more seconds my screen turned black. No cursor, no login screen. How can I log in to the safe mode?
I left for work this morning, and my computer remained on as per normal. Nothing stressful left running only skype and a browser as far as I can remember. Come home and find that the screen won't move from being black. Restart and it loads up normal until it says "Loading Operating System..." It then moves to a black screen which after a few seconds fades out to an even darker black. Then nothing happens. I have/am trying to run the repair tool via CD boot of my Win7 disk but it is incredibly sluggish. I've been waiting to even see the repair tool for an hour each time before I get frustrated and retry. Also I cannot enter safe mode via spamming F8. It seems that my Win7 went rogue and decided to move out
I bought Oblivion through the Gamestop app about a month ago. It's been working fine and I've put about 35 hours into it Then today it started being weird- the screen goes black when I try to load my game. I tried opening it several times and it kept doing the same thing. I really don't want to have to re-install it or reset it in any way since I've put so much time into it and I don't want to have to restart the whole thing
When Win 7 pro (32 bits) boots up, as we all notice, there is a second or so when there is a black screen, w/ just your mouse cursor, and then you are supposed to see the blue Welcome screen.
In the past 2 months, my computer is stuck at that black screen about 7 times, as recent as tonight. I've done a clean install w/ the latest Nvidia driver 2 weeks ago. No change. It looks like win 7 Pro is stuck there and waiting for something as my hard drive light blink on and off.
So, I would do nothing, or sometimes I would disconnect the HDMI port connects to my 3rd PC Panel (see below), and I would wait for 5 min. or so. Then my login logo shows up, I click it, and I got to windows.
Now, w/ the normal boot up, I don't have that login logo, win 7 pro will simply boot up directly to win 7 main screen after I turn on the computer.
Some1 said this could be IRQ sensing problem of the video card. But so far, I have no proof on that 1 way or the other: All these started about 2 months ago, at or near the same time when the Sharp LED TV technician came to my house and upgraded all the firmware, including the firmware that consumers can't download, to my Sharp LED LCD TV, as the power button wasn't working.
Then in the past 2 mth., every time I turned on my LCD TV, which is connected to my computer as the 3rd screen via a DVI to HDMI cable, Win 7 senses this 3rd panel, and the screen went black and back on again. This isn't the way it used to be: as it WAS NOT SWITCH TO THE HDMI PC PORT.
My Sharp LCD has 4 HDMI output. Tonight for e.g., I was on Input 2, which is satellite, but as soon as I turn on the Sharp LCD, win 7 senses this 3rd screen, and the screen do that black screen then back on again w/ the music charm note.
This was not the way it used to be, in the past yr., w/ this same set up, win 7 only went to the black screen and back on when I switch to Input 1, which is PC at 1920x1080. And I don't know if the above is related to the boot up lock up or not.
it started over a year ago when I started to get random BSOD messages, after no specific update, installation, or hardware change whatsoever.those usually included "IRQ_LESS_OR_EQUAL". usually after a crash it took some startup attempts to boot successfuly.
more recently crashes followed those BSOD's: "BAD_POOL_CALLER" "BAD_POOL_HEADER" "BAD_SYSTEM_CONFIG_INFO"
since the latest crash, the computer is failing to start - after widows logo appears, I get a black screen with a cursor. NO control afterwards - Ctrl+Alt+Del doesn't work and I all I can do is restart.
I tried:
1. safe mode (all kinds) - still get the black screen with no response
2. low resolution video mode- same
3. Windows Restore, both from the boot options dialog and from the WIN7 installation disc boot - it doesn't run, I get an error message ("the application referenced memory......... .....memory can't be read" )
4. memory check, it ran but I cant access the results.
5. Windows system files checker ('sfc'), via the repair tools command prompt - it doesn't start, says there's a startup repair pending so startup - yet there isn't
6. reset BIOS settings - nothing before the current trouble, at times, I also tried:
- reinstalling drivers for Graphic card, Network card and motherboard - cleaning dust in the CPU cooler - fastening connectors - clean format (that was a long time ago but blue screens appeared even shortly afterwards)
nothing worked....
specs: cpu: Intel I7 motherboard: Asus P7H55-M PRO Graphic card: PNY nVidia Quadro 580 Windows 7 pro
wondering if anyone could help me solve this problem. When starting computer everything works fine, the windows logo loads, I get the welcome word on the screen and just when the screen should turn into desktop all I get i black screen with a cursor. I can access the Task Manager through CTRL+Alt+Del.restart or shut down the computer. I tried setting it to an earlier date, but no difference. I tried the system repair - found no problems. So do not know what to do with it. It does load in safe mode.This has happened yesterday after I have attached hdmi cable to it, which I have done many times previously without any problems, do not know if this could have any connection to the problem.
i got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU Nvidia GeForce 7800 or smthng 512mb 4GB ram 2x120GB WD HDz
I have a dv7 notebook with Win 7 Home Premium installed on it. Everything is running fine, except a couple of days ago the notebook began to take too damn long to boot up when restarting or just when powering it on.
I noticed it gets "stuck" on a black screen, just like a blank DOS screen, for about 2 minutes before booting up Windows.
I have tried downloading new BIOS from HP website, resetting the BIOS settings, changing the boot order but nothing really works. It always stays on the black screen for around two minutes and then Windows boots up normally. No text is shown, nothing at all.
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
I'm new here.I couldnt find any solution for my problem anywhere and i thought i can find it here.
I have Windows 7 Ultimate 32 Bit and im trying to install it for about 6 months. I installed it once but after one week,os is gone and stuck at classpnp.sys
Here are the steps i followed when trying to install; Selected Boot Menu > CD/DVD
Seen windows is loading files. Seen Starting windows but its gone before the 4 colored windows logo comes.
And endless black screen. I also tried to boot from dvd in safe mode.It hangs at disk.sys I checked rams. I have 1 gb x 2 rams.There is blue and brown sockets for rams on my motherboard.
Both of rams connected to blue ones.When i disconnect one of them pc opens but same issue. When i disconnect one of them and connect it to brown socket pc didnt opened.
Sometimes, when I turn on my pc, it gets stuck before loading the OSI can see the bios logo, all fineThen a black screen with an intermitent _ I must reset the pc from the case button because I cant even ctrl alt del (this happens right before i can see a windows logo, message, anything)and then after the reset the system boots normally
I'm in the Midwest and thunderstorms are quite common out in this area. To protect my computer from power surges, I turn off BOTH my computer and the power supply. Then I unplug the surge protector from the socket which the computer and other peripherals are attached to. However, this morning when I plugged back the surge protector, turned on the PSU and then computer, Windows gave me a message the there was no virtual disk and then it went to a blank screen and got stuck there.
My computer would start to boot up"Windows is loading files" and get stuck. I would have to do a hard shut down after it sticks there for an hour. Anyhow, it would eventually boot up, all though one time I got a BSOD Stop: 21C error.For the past 3 days, no sound is coming out of my speakers. All of a sudden it is coming out of my HDMI monitor instead, I went and bought new speakers because I thought they had died. It is still doing it though. Even if I plug headphones in the front jack, I get nothing.
Okay okay. So I tried to boot Windows 7 Disc on my PC. I rearrange the boot priority to my CD/DVD Drive. So it loaded the windows files. However, On the Windows Starting.. Sign its stucked. But when I changed my HDD to another one, which is seagate. It just normally boots. BTW, the previous HDD is Hitachi.
So I popped the top off my desktop, removed my wireless card and was checking to see if the card would fit in a PCI slot (it's a PCI-E and it does not). I then re installed it and started my computer up. I was prompted with a hard drive option (a Y/N option) of which I chose N. I don't know exactly what it was asking but I am trying to get it to re prompt the menu.This lead to me getting stuck at the Loading Operating System screen. I was able to boot to windows by manually booting via F12 to my 128gb SSD. This successfully booted to Windows. I noticed that the interface was a little buggy (The date was 3 years off and not all the icons were appearing). I re booted, was prompted with the same Y/N, Chose Y, and was still stuck at the Loading Operating System.I can boot manually to Windows using F12 but something feels wrong due to the date, ect.Is this a MOBO failure? The NIC Port of the MOBO recently died on me so I don't know if the MOBO itself is dying on me. The computer is less than a year old and was built by me.
Windows 7 updates keep coming but will not download. I do not own the win 7 o/s disk, cannot re-load. When I restart pc, warning says loading 2 of 3 updates, but after 2 hours nothing changes. I have to manually turn off pc and then turn it back on.
I have just bought a new PC 5 hours ago .. I have bought everything GPU/CPU/MOBO/RAM/PSU/CASE .. only thing i did not buy was a HDD and DVD-Rom.. Because i own both and both are only 4 months old.. So i have put the new Parts together.. Then went to old PC , Formatted C drive.. Then added HDD and DVD=ROM from old PC to New one .. Booted and everything was fine except ofc no windows so gave the boot.msgr is missing thingy .. So i put in my Windows DVD .. Set it to boot from DVD .. It boots .. Goes through the "Loading Files" Then it shows me the Windows logo and stays there for a small while.. Then it suddenly turns black with a small gray bar at the bottom... and thats it .. it stays there forever and after some mins i can even here the DVD stops running.. I have uploaded a PIC to help u understand.. Also i tried installing from USB flash drive and same problem.
Here is the PIC of where i am stuck at *Notice the barely visible gray bar at bottom? : [URL]
XFX Pro 550W ATI 6850 AMD FX6100 4GB of DDR3 RAM AsRock 970 Extreme 4 Motherboard Thermaltake Spacecraft VF-I Case.
my computer started laggin really bad, couldnt even move mouse without major lag. Anyways so i got sick of it and reinstalled windows 7 64 bit, now my computer gets stuck at loading operating system. Thought it was SSD so took it out and put in a 500gp wd hard drive (I know it works fine, becuase had it run on company server all week before i used it) so then i installed it on their and still was stuck so then i took out my other 500gb wd hard drive where i store all my files, just so i could make sure that my OS can only install on one item and not be corrupted by any other drives. So now the problem still presit and i have tried resetting my bios by taking out battery for 10 min, still no results, so then i ran startup repair (Had no hope) and it still didnt work. Need help and bellow I will post all my hardware, by the way my computer is a custom build and has been working fine for 2-3 months. Also I do overclock, but i doubt that had anything to do with it, because it started to lag weeks after i started overclocking. [code]
