Windows 7 updates keep coming but will not download. I do not own the win 7 o/s disk, cannot re-load. When I restart pc, warning says loading 2 of 3 updates, but after 2 hours nothing changes. I have to manually turn off pc and then turn it back on.
View 14 RepliesI'm in the Midwest and thunderstorms are quite common out in this area. To protect my computer from power surges, I turn off BOTH my computer and the power supply. Then I unplug the surge protector from the socket which the computer and other peripherals are attached to. However, this morning when I plugged back the surge protector, turned on the PSU and then computer, Windows gave me a message the there was no virtual disk and then it went to a blank screen and got stuck there.
View 1 Replies View RelatedMy computer would start to boot up"Windows is loading files" and get stuck. I would have to do a hard shut down after it sticks there for an hour. Anyhow, it would eventually boot up, all though one time I got a BSOD Stop: 21C error.For the past 3 days, no sound is coming out of my speakers. All of a sudden it is coming out of my HDMI monitor instead, I went and bought new speakers because I thought they had died. It is still doing it though. Even if I plug headphones in the front jack, I get nothing.
View 12 Replies View RelatedI have had an issue the past week with my computer both loading and shutting down and I also have an issue with hiccups during gaming...
I have downloaded Malwarebytes and Superantispyware to see if I have also attempted to update all my drivers via windows 7 option
computer specs:
Intel Core 2 Quad Q6600 not overclocked
2x 2GB Mushkin Enhanced Redline DDR2 Ram
2x 2GB corsair DDR2 Ram
EVGA Superclocked GeForece GTX 560 Ti
EVGA Nvidia nForce 750i SLI
Antec High Current Gamer 900w PSU
Western Digital Raptor 160GB 10000RPM (Dont remember exact one)
Windows 7 64-bit Home Premium
Okay okay. So I tried to boot Windows 7 Disc on my PC. I rearrange the boot priority to my CD/DVD Drive. So it loaded the windows files. However, On the Windows Starting.. Sign its stucked. But when I changed my HDD to another one, which is seagate. It just normally boots. BTW, the previous HDD is Hitachi.
View 9 Replies View RelatedI rebooted my PC after installing the latest version of iTunes, and upon reboot I couldn't get past the motherboard splash screen. I tried removing each stick of RAM individually, I tried removing the battery, but finally it was clearing the CMOS which helped me at least get past the mobo splash screen (after pulling out all of the USB devices plugged in otherwise it would also freeze), but now it gets stuck on the Windows 7 loading screen.
I tried entering the Windows 7 repair function, but it freezes on a black screen (I waited about 20 minutes).
I tried booting into safe mode, but it gets stuck while loading this file: AVGIDSEH.sys
Now since I can't even boot into windows to try to do any kind of diagnosis, I figured I would create a USB drive portable version of Windows 7.
My question is, if I manage to boot into my portable Windows, what kind of tests should I run?
Finally one last question, typically when Windows 7 gets stuck at loading is it hardware related or would a complete re-install fix the issue? At this point I just need to get it back and running I don't care about losing my settings and programs.
Yesterday I woke up to my computer sitting at the starting windows loading screen. I have no idea why it turned off but now every time i try to start it, It sits at the loading screen. I already tried system restore and start up repair. Did it a bunch of different times and the restore worked yet still had the same problem repair did not work. I can get into safe mode, so i tried to do the msconfig way. I did selective start up and disabled all the non Microsoft services. Restarted and It still sat on loading screen. I then opened the desktop up and tried cleaning it making sure all hardware was properly seated. Still no success.
View 5 Replies View RelatedI have just bought a new PC 5 hours ago .. I have bought everything GPU/CPU/MOBO/RAM/PSU/CASE .. only thing i did not buy was a HDD and DVD-Rom.. Because i own both and both are only 4 months old.. So i have put the new Parts together.. Then went to old PC , Formatted C drive.. Then added HDD and DVD=ROM from old PC to New one .. Booted and everything was fine except ofc no windows so gave the boot.msgr is missing thingy .. So i put in my Windows DVD .. Set it to boot from DVD .. It boots .. Goes through the "Loading Files" Then it shows me the Windows logo and stays there for a small while.. Then it suddenly turns black with a small gray bar at the bottom... and thats it .. it stays there forever and after some mins i can even here the DVD stops running.. I have uploaded a PIC to help u understand.. Also i tried installing from USB flash drive and same problem.
Here is the PIC of where i am stuck at *Notice the barely visible gray bar at bottom? : [URL]
XFX Pro 550W
ATI 6850
AMD FX6100
4GB of DDR3 RAM
AsRock 970 Extreme 4 Motherboard
Thermaltake Spacecraft VF-I Case.
andwhen i put it on it keeps going in windows is loading files then when it is finish it goes on the laptop starting page and goes back on windows is loading files
View 3 Replies View RelatedI was attempting to run chkdsk and went into Safe Mode -- no problems discovered. However, since then whenever I boot / reboot laptop Safe Mode screens reappear. Thinking back I don't recall any guidelines from any Win7 tech sites advising turning off Safe Mode. So, I initially assumed Safe Mode automatically reverted to the prior mode -- apparently an incorrect assumption. How do I get back to Normal Windows Start Up for Win7 Home Premium x64?
I got out of Safe Mode to restart somehow -- ESC key -- I did not force quit by turning off. Since then system now starts by scrolling thru 2-3 screens of "Loading: ... (various driver drive locations / various names)" and then Win 7 login screen comes in with Password box.
Everything else is running fine now except I suspect I need to go back to boot Safe Mode screen and turn Safe Mode off -- return it back to Start Win 7 Normally.
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
The first problem was that it kept booting into the windows startup repair. For a split second i can see windows 7 loading but then it automatically went to the startup repair , after many many reboots i opened the command prompt in windows startup repair and tried fixing the master reboot.Now it gets stuck at loading operating system.Even when i try to boot from the windows 7 CD and Truecrypt rescue disk it still gets stuck at loading operating system.The whole harddrive was encrypted with truecrypt and it use to go to truecrypt bootloader after loading the operating system but it doesn't do that anymore.
Specs :
mobo : Gigabyte GA-890FXA-UD5
cpu: phenom ii x6 1090t
gpu : radeon hd 6950
hard drive : western digital black caviar 1TB
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
View 3 Replies View Relatedmy Dell Studio 1555 laptop will not boot either into regular windows or safe mode.When booting into safe mode, the very last file that will load is "CLASSPNP.SYS".When that happens it will stay stuck loading the next file for a few minutes, then restart itself into the Windows Error Recovery screen.When I try start-up repair, it goes to a blank black screen and repeats the procedure above (ie. it gets stuck and restarts a few minutes later) When I hard-shut down by pressing the power button, a BSoD appears for a fraction of a second right before it dies.What could the problem be, and what can I do to fix it? I have the windows 7 install disk, if needed. Should I go ahead and try an installation repair using the disk?
View 5 Replies View RelatedSo I booted up my PC today and every single time it would get past the windows loading screen, a BSOD would flash on the screen for a split second and reboot. I tried booting into safe mode and that would not work either. The next step I figured would be to format and do a clean install, but here's the thing... Windows didn't even recognize my partition! It has my other 2 HDDs but not my Windows 7 partition. The HDD in question shows up in BIOS, but not in Windows. So, should I just get a new HDD? Startup Repair didn't work either, as it just hung/froze.
View 3 Replies View RelatedI have installed a legit Windows 7 OS on my laptop. Its not an upgrade, it was a blank hard drive. WIndows 7 installed flawlessly, picked up all my drivers. The only problem is I am having problems with Windows 7 updates. When I choose Windows 7 update, it says "Checking for updates" and stays like that - forever. Even the next day. I did heavy heavy research, found out others are having the same problem. I tried all the fixes I could find, which are listed below:
1. No Anti-virus programs installed yet - brand new Windows 7 ultimate installation
2. There is no spyware - its a brand new clean install
3. Firewall shut off
4. Temp files, cookies, history cleared
5. background intelligent transfer service set to automatic in services.msc
6. software distribution folder renamed
7. tried shutting off automatic updates and doing it manually
8. Added windowsupdate to trust zone
9. ran MicrosoftFixit50202 in normal and advanced mode
Even with my internet SHUT OFF (turned off modem) it still checks for updates and doesn't fail with "No internet connection available".
Ok over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit
So I checked to see if they failed and they were installed successfully!
I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.
I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.
I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!
Sometimes, when I turn on my pc, it gets stuck before loading the OSI can see the bios logo, all fineThen a black screen with an intermitent _ I must reset the pc from the case button because I cant even ctrl alt del (this happens right before i can see a windows logo, message, anything)and then after the reset the system boots normally
View 4 Replies View RelatedTrying to install windows 7 on a different partition to multi-boot with windows xp sp3.
Downloaded the "7600.16385.090713-1255_x86fre_client_en-us_Retail_Ultimate-GRMCULFRER_EN_DVD.iso" file and burned a DVD.
Booted from the disc and all went well with the "press any key to boot from CD or DVD" / "setup is copying files"..
Post this screen, the windows logo appeared and it took about 3 minutes for the screen where you choose your language,etc to appear.
Then comes trouble The screen remained idle for about another 3 minutes before the "Setup is loading" appeared and it stops here forever.... pls help!
Note: I tried installing from my pen drive as well..., but the same exact result.
My computer after trying to (stupidly) remove the SPTD driver so Daemon Tools would work. Is stuck on the black loading screen, even when loading from safe mode.
I tried removing the sptd driver, but only took out 1 of 2 files, the other not being removed properly. So i restarted (which worked) and restored my computer to an hour before i tried any of it. I could only log on in safe mode and i checked and saw that both drivers were there. So i turn off the computer and it was fine.
However, i tried to turn on the computer again later, but it got stuck on the black screen with just the mouse. I held the power button and retried,in safe mode, this time getting to my computer background, with nothing loading. I tried yet again and only got black screen. It says all my drives loaded and everything, including sptd, but nothing is loading.
What is wrong with my computer? I am not that good with them and cannot open it up without a lot of help if it is a hardware problem
So I popped the top off my desktop, removed my wireless card and was checking to see if the card would fit in a PCI slot (it's a PCI-E and it does not). I then re installed it and started my computer up. I was prompted with a hard drive option (a Y/N option) of which I chose N. I don't know exactly what it was asking but I am trying to get it to re prompt the menu.This lead to me getting stuck at the Loading Operating System screen. I was able to boot to windows by manually booting via F12 to my 128gb SSD. This successfully booted to Windows. I noticed that the interface was a little buggy (The date was 3 years off and not all the icons were appearing). I re booted, was prompted with the same Y/N, Chose Y, and was still stuck at the Loading Operating System.I can boot manually to Windows using F12 but something feels wrong due to the date, ect.Is this a MOBO failure? The NIC Port of the MOBO recently died on me so I don't know if the MOBO itself is dying on me. The computer is less than a year old and was built by me.
View 4 Replies View Relatedmy computer started laggin really bad, couldnt even move mouse without major lag. Anyways so i got sick of it and reinstalled windows 7 64 bit, now my computer gets stuck at loading operating system. Thought it was SSD so took it out and put in a 500gp wd hard drive (I know it works fine, becuase had it run on company server all week before i used it) so then i installed it on their and still was stuck so then i took out my other 500gb wd hard drive where i store all my files, just so i could make sure that my OS can only install on one item and not be corrupted by any other drives. So now the problem still presit and i have tried resetting my bios by taking out battery for 10 min, still no results, so then i ran startup repair (Had no hope) and it still didnt work. Need help and bellow I will post all my hardware, by the way my computer is a custom build and has been working fine for 2-3 months. Also I do overclock, but i doubt that had anything to do with it, because it started to lag weeks after i started overclocking. [code]
View 2 Replies View RelatedMy toshiba netbook (running windows 7 ultimate) has been stuck in an updates loop for the better part of the year. Whenever it has wanted to restart for updates, I always let it, but now it gets stuck configuring and sometimes realizes that it's failed and reverts the changes, or sometimes (when it's stuck on the same percentage for hours or even days) I have to pull the battery and restart in safe mode to get it to work again. Now it's really stupidly slow and can't even open firefox half the time. I've taken some basic precautions, like thorough malware scans, backing up all my files on my external hard drive and deleting useless programs, but it's still sluggish and unreliable
View 5 Replies View RelatedMy computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
View 2 Replies View RelatedThe other day I assembled a new built PC and then went to go install the OS. I tried using a boot disk of Windows 7 Pro x64 but right after the POST it immediately goes to a screen where it says "Loading Operating System" and just hangs there. I have tried various fixes I have seen on other sites but can't get it it to move on.
PC Specs:
HD 1T|WD 7K 64M SATAIII
DVD BRN ASUS | DRW
EVGA|GeForce GTX 570 1280MB 320-bit GDDR5
MoBo GIGABYTE|GA-P67A-UD5-B3
PSU CORSAIR|750W
CPU INTEL|CORE I7 2600 3.4G Sandy Bridge
MEM 4Gx4|CORSAIR Vengeance
Here are the case and monitor as well, in case they are important.
CASE ANTEC|NINE HUNDRED
MNTR SaMSuNG|LCD B2330
I installed an ocz vertex 4 ssd (256g model) into my msi gt70 laptop. A product key came with the laptop, and I've burned windows 7 to a disc. I made sure the ssd has priority in the BIOS too.
When I start up the installation, it gets to the "Installing updates" step, but doesn't progress any further, the laptop is effectively frozen on that step. I've tried re-installing a couple times now and it continues to get stuck on "Installing updates".
Do I need an active internet connection for this step by any chance?
Windows 7 64 bit cannot get windows 7 updates to down load getting error 8024402f have tried all suggested ready fixes like FIXIT. noted windows defender updated yesterday....emails work....internet works
View 1 Replies View RelatedI am currently having a probelm with my windows not downloading 2 updates. I let the auto update download and install all of the important updates but I noticed that there are 2 that are not automatacily downloading; SP 1 and Security KB2467173. The odd thing is, when I tried to download them manually through windows update, the download just hangs at 0% I have been using windows 7 for about 8 months and this is the first time an update won't download.One other thing, when I stop the update that's refusing to download, my cpu goes up to %50 usage untill i restart.
Win 7 64
Asus P7P55d Pro mobo
i7-870
4 gigs ddr 3
GTX 560 ti
i have a hp pavition dv6-6047cl notebook , i try to update, this is what i get. windows update cannot currently check for updates, because the service is not running. you may need to restart your computer
View 2 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I wonder if there is a program where I can download the updates for Windows 7 and then I can integrate them into iso.
View 6 Replies View Related