Windows 7 Ultimate 64 Bit Gets Stuck After Loading Files
Jun 10, 2012
I have just bought a new PC 5 hours ago .. I have bought everything GPU/CPU/MOBO/RAM/PSU/CASE .. only thing i did not buy was a HDD and DVD-Rom.. Because i own both and both are only 4 months old.. So i have put the new Parts together.. Then went to old PC , Formatted C drive.. Then added HDD and DVD=ROM from old PC to New one .. Booted and everything was fine except ofc no windows so gave the boot.msgr is missing thingy .. So i put in my Windows DVD .. Set it to boot from DVD .. It boots .. Goes through the "Loading Files" Then it shows me the Windows logo and stays there for a small while.. Then it suddenly turns black with a small gray bar at the bottom... and thats it .. it stays there forever and after some mins i can even here the DVD stops running.. I have uploaded a PIC to help u understand.. Also i tried installing from USB flash drive and same problem.
Here is the PIC of where i am stuck at *Notice the barely visible gray bar at bottom? : [URL]
XFX Pro 550W
ATI 6850
AMD FX6100
4GB of DDR3 RAM
AsRock 970 Extreme 4 Motherboard
Thermaltake Spacecraft VF-I Case.
My computer would start to boot up"Windows is loading files" and get stuck. I would have to do a hard shut down after it sticks there for an hour. Anyhow, it would eventually boot up, all though one time I got a BSOD Stop: 21C error.For the past 3 days, no sound is coming out of my speakers. All of a sudden it is coming out of my HDMI monitor instead, I went and bought new speakers because I thought they had died. It is still doing it though. Even if I plug headphones in the front jack, I get nothing.
andwhen i put it on it keeps going in windows is loading files then when it is finish it goes on the laptop starting page and goes back on windows is loading files
My computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
I'm in the Midwest and thunderstorms are quite common out in this area. To protect my computer from power surges, I turn off BOTH my computer and the power supply. Then I unplug the surge protector from the socket which the computer and other peripherals are attached to. However, this morning when I plugged back the surge protector, turned on the PSU and then computer, Windows gave me a message the there was no virtual disk and then it went to a blank screen and got stuck there.
Okay okay. So I tried to boot Windows 7 Disc on my PC. I rearrange the boot priority to my CD/DVD Drive. So it loaded the windows files. However, On the Windows Starting.. Sign its stucked. But when I changed my HDD to another one, which is seagate. It just normally boots. BTW, the previous HDD is Hitachi.
I rebooted my PC after installing the latest version of iTunes, and upon reboot I couldn't get past the motherboard splash screen. I tried removing each stick of RAM individually, I tried removing the battery, but finally it was clearing the CMOS which helped me at least get past the mobo splash screen (after pulling out all of the USB devices plugged in otherwise it would also freeze), but now it gets stuck on the Windows 7 loading screen.
I tried entering the Windows 7 repair function, but it freezes on a black screen (I waited about 20 minutes).
I tried booting into safe mode, but it gets stuck while loading this file: AVGIDSEH.sys
Now since I can't even boot into windows to try to do any kind of diagnosis, I figured I would create a USB drive portable version of Windows 7.
My question is, if I manage to boot into my portable Windows, what kind of tests should I run?
Finally one last question, typically when Windows 7 gets stuck at loading is it hardware related or would a complete re-install fix the issue? At this point I just need to get it back and running I don't care about losing my settings and programs.
Yesterday I woke up to my computer sitting at the starting windows loading screen. I have no idea why it turned off but now every time i try to start it, It sits at the loading screen. I already tried system restore and start up repair. Did it a bunch of different times and the restore worked yet still had the same problem repair did not work. I can get into safe mode, so i tried to do the msconfig way. I did selective start up and disabled all the non Microsoft services. Restarted and It still sat on loading screen. I then opened the desktop up and tried cleaning it making sure all hardware was properly seated. Still no success.
Windows 7 updates keep coming but will not download. I do not own the win 7 o/s disk, cannot re-load. When I restart pc, warning says loading 2 of 3 updates, but after 2 hours nothing changes. I have to manually turn off pc and then turn it back on.
I was attempting to run chkdsk and went into Safe Mode -- no problems discovered. However, since then whenever I boot / reboot laptop Safe Mode screens reappear. Thinking back I don't recall any guidelines from any Win7 tech sites advising turning off Safe Mode. So, I initially assumed Safe Mode automatically reverted to the prior mode -- apparently an incorrect assumption. How do I get back to Normal Windows Start Up for Win7 Home Premium x64?
I got out of Safe Mode to restart somehow -- ESC key -- I did not force quit by turning off. Since then system now starts by scrolling thru 2-3 screens of "Loading: ... (various driver drive locations / various names)" and then Win 7 login screen comes in with Password box.
Everything else is running fine now except I suspect I need to go back to boot Safe Mode screen and turn Safe Mode off -- return it back to Start Win 7 Normally.
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
The first problem was that it kept booting into the windows startup repair. For a split second i can see windows 7 loading but then it automatically went to the startup repair , after many many reboots i opened the command prompt in windows startup repair and tried fixing the master reboot.Now it gets stuck at loading operating system.Even when i try to boot from the windows 7 CD and Truecrypt rescue disk it still gets stuck at loading operating system.The whole harddrive was encrypted with truecrypt and it use to go to truecrypt bootloader after loading the operating system but it doesn't do that anymore.
Specs :
mobo : Gigabyte GA-890FXA-UD5 cpu: phenom ii x6 1090t gpu : radeon hd 6950 hard drive : western digital black caviar 1TB
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
my Dell Studio 1555 laptop will not boot either into regular windows or safe mode.When booting into safe mode, the very last file that will load is "CLASSPNP.SYS".When that happens it will stay stuck loading the next file for a few minutes, then restart itself into the Windows Error Recovery screen.When I try start-up repair, it goes to a blank black screen and repeats the procedure above (ie. it gets stuck and restarts a few minutes later) When I hard-shut down by pressing the power button, a BSoD appears for a fraction of a second right before it dies.What could the problem be, and what can I do to fix it? I have the windows 7 install disk, if needed. Should I go ahead and try an installation repair using the disk?
So I booted up my PC today and every single time it would get past the windows loading screen, a BSOD would flash on the screen for a split second and reboot. I tried booting into safe mode and that would not work either. The next step I figured would be to format and do a clean install, but here's the thing... Windows didn't even recognize my partition! It has my other 2 HDDs but not my Windows 7 partition. The HDD in question shows up in BIOS, but not in Windows. So, should I just get a new HDD? Startup Repair didn't work either, as it just hung/froze.
Sometimes, when I turn on my pc, it gets stuck before loading the OSI can see the bios logo, all fineThen a black screen with an intermitent _ I must reset the pc from the case button because I cant even ctrl alt del (this happens right before i can see a windows logo, message, anything)and then after the reset the system boots normally
My computer after trying to (stupidly) remove the SPTD driver so Daemon Tools would work. Is stuck on the black loading screen, even when loading from safe mode.
I tried removing the sptd driver, but only took out 1 of 2 files, the other not being removed properly. So i restarted (which worked) and restored my computer to an hour before i tried any of it. I could only log on in safe mode and i checked and saw that both drivers were there. So i turn off the computer and it was fine.
However, i tried to turn on the computer again later, but it got stuck on the black screen with just the mouse. I held the power button and retried,in safe mode, this time getting to my computer background, with nothing loading. I tried yet again and only got black screen. It says all my drives loaded and everything, including sptd, but nothing is loading.
What is wrong with my computer? I am not that good with them and cannot open it up without a lot of help if it is a hardware problem
So I popped the top off my desktop, removed my wireless card and was checking to see if the card would fit in a PCI slot (it's a PCI-E and it does not). I then re installed it and started my computer up. I was prompted with a hard drive option (a Y/N option) of which I chose N. I don't know exactly what it was asking but I am trying to get it to re prompt the menu.This lead to me getting stuck at the Loading Operating System screen. I was able to boot to windows by manually booting via F12 to my 128gb SSD. This successfully booted to Windows. I noticed that the interface was a little buggy (The date was 3 years off and not all the icons were appearing). I re booted, was prompted with the same Y/N, Chose Y, and was still stuck at the Loading Operating System.I can boot manually to Windows using F12 but something feels wrong due to the date, ect.Is this a MOBO failure? The NIC Port of the MOBO recently died on me so I don't know if the MOBO itself is dying on me. The computer is less than a year old and was built by me.
TeamViewer 8.0.16642 stopped loading on my Win 7 Ultimate box at startup. I went to services.msc and stopped TeamViewer. I went to Control Panel, Uninstall a Program and uninstalled TeamViewer. It took a long time to uninstall. I ran CCleaner Registry and deleted the TeamViewer entries. I also ran Little Registry Cleaner and deleted the TeamViewer entries. I deleted the TeamViewer folder in Programs x86 folder and ran both reg cleaners again and rebooted. I was able to successfully reinstall TeamViewer 8.0.16642 again... but TeamViewer fails to load on startup. I was not upgrading TeamViewer when I reinstalled it. Any ideas on how to get TeamViewer to load on startup? I'm confused because it used to work VERY well for me. I'm not sure why it stopped working or why it won't start at reboot in the system tray.
Today, there was a power shortage while my PC was on. Quickly, after it happened, I turned off the PSU and the Surge Protection in fear something might have happened there.After the power came back, I turned everything on again and started Windows.It booted normally, no strange sounds nor other stuff.My PC has only 1 user (me) so there's no User Panel. It automatically went to loading Windows.The problem started here. Windows would load my wallpaper and Task Bar (I dunno how it's called in English, it's the one with the Windows Button), but no programs nor the icons would load. It's stuck there.I have tried CTRL+ALT+DEL, but there was no response (actually, there was, an error message saying Windows wasn't able to show the user panels and power panels, and that I should reboot my computer manually).After some time, I was able to get into Computer. My 3 partitions were there (2 HDDs, 1 for OS and another partitioned in 2) but I couldn't access them.
my computer started laggin really bad, couldnt even move mouse without major lag. Anyways so i got sick of it and reinstalled windows 7 64 bit, now my computer gets stuck at loading operating system. Thought it was SSD so took it out and put in a 500gp wd hard drive (I know it works fine, becuase had it run on company server all week before i used it) so then i installed it on their and still was stuck so then i took out my other 500gb wd hard drive where i store all my files, just so i could make sure that my OS can only install on one item and not be corrupted by any other drives. So now the problem still presit and i have tried resetting my bios by taking out battery for 10 min, still no results, so then i ran startup repair (Had no hope) and it still didnt work. Need help and bellow I will post all my hardware, by the way my computer is a custom build and has been working fine for 2-3 months. Also I do overclock, but i doubt that had anything to do with it, because it started to lag weeks after i started overclocking. [code]
Ok so today o decided to uninstall alienware my colors or something like that. Downloaded it from dell website. Its for windows 7 the name of was breed. So after i uninstalled it my icons arrows were gone it was the app icon and the arrow that goes with it was like a page and two blue dots. I couldnt acess any folders.no control panel. It was all blabk. Desktop appeard fine except for the arrows were missing on tje icons. It asked me to restart so i did.it went pass the windows logo loading screen. Then came the welcome screen.it prompted please wait with the circle. Problem was after that. No login or anything. No password on my account so it should have loged in. It doesnt hang or anything. It just stays on that screen. Only options i have it restart sleep and shutdown aling with that button for speech keyboard and someother things. I tried safe mode no luck same thing doesnt log in. Tried restore to previous known state. Nothing. I cant acess repair option as i have no windows 7 64-bit cd. Only 32-bit cd. Also it doesnt show my account.
Mb-asus p5g41t-mlx3 Cpu-intel pentium d 925 3.00ghz oc @4.00ghz graphics-xfx radeon hd 6770 1gddr5 oc psu-corsair gs 700 Cooling-corsair h70 Memory-corsair ddr3 1333 4gb 2 sticks Hard drive-cavair 250gb hardrive
i am having problems with my windows 7 devices and printers screen. I have tried all solutions like stopping the blue tooth support service, uninstalling printer drivers, registry fix for IE 8, stopping printer spooler service and changing display icons all to no avail. I have no idea when the problem started but ive been experiencing this for three months now. i think i dont want to reinstall my OS if it ii am using windows 7 ultimate 64 bit on 4gb ram and intel core i5 processor. also using ie9 as my browser.
The other day I assembled a new built PC and then went to go install the OS. I tried using a boot disk of Windows 7 Pro x64 but right after the POST it immediately goes to a screen where it says "Loading Operating System" and just hangs there. I have tried various fixes I have seen on other sites but can't get it it to move on.
PC Specs: HD 1T|WD 7K 64M SATAIII DVD BRN ASUS | DRW EVGA|GeForce GTX 570 1280MB 320-bit GDDR5 MoBo GIGABYTE|GA-P67A-UD5-B3 PSU CORSAIR|750W CPU INTEL|CORE I7 2600 3.4G Sandy Bridge MEM 4Gx4|CORSAIR Vengeance
Here are the case and monitor as well, in case they are important. CASE ANTEC|NINE HUNDRED MNTR SaMSuNG|LCD B2330
I have read a lot on this getting stuck. I had an issue with it getting stuck, so I had HP to send me the recovery disks and I backed everything up and did a clean install. It did its thing and now it is at the Windows is loading files screen. Bad news is, it has been on this screen since last night at around 8:00 (12 hrs), Good news is, it has been moving. I put a sticky note on the progress bar, even this morning it has moved about a half an inch. Should I be worried or just patient? It said it may take up to 3 hours and it has been 12 hours.
I have Dell XPS 15. I shut it down normally and then tried to switch it on.. but it is hanging up and getting Windows is loading files after the progress bar. I tested the memory tests and it has passed the test saying now error found with your memory.
I just put this computer together (check out my specs) and put the OS DVD in to install. It goes through the motions of "loading files" and then when it says "starting windows" it gets just to the point where you can see all 4 colored orbs and it freezes.How do I fix this issue and install windows 64bit?
I've been trying to install Windows 7 for days now...with no luck at all so far...and I'm getting quiet frustrated as you can imagine.
The installation always stops after the installer loads the files, screen freezes on the windows logo, and the progress bar stops immediately stops moving (or it freezes even before the logo is even fully displayed). The DVD then stops and no matter how long I wait nothing happens from there. If I run the text mode install, it stops on disk.sys.
I've looked everywhere on the net and tried many things:
unplugged anything not necessary during install (all usb, got rid of sound card, tried another graphic card, removed ram, switched ram position)
cleared cmos, no change
bios: disabled all unecessary (floppy (I don't use any) enabled/disabled parallel/serial port (for some it was a fix on other mobo's...or so I have read), messed around with lots of settings
tried other DVD drive, burned another DVD.
Now this issue isn't new to me, since I have never been able to install vista either. xp and ubuntu gave me a lot of problems too, but with xp pressing F7 during the initial loading would solve the issue and the install would run fine, on ubuntu adding no acpi would also allow install. With vista and windows 7 setup, pressing F7 during the file load doesn't apparently work, and I don't know how to bypass the acpi check.
If I try to run the install within xp, I get a compatibility report saying that my computer isn't acpi compatible...while the k7s8x bios clearly says it is. I tried enabling/disabling the acpi in the bios and it makes no difference (my bios is the last available, the 2.60)
I have seen people asking for k7s8x lan drivers for windows 7 on this forum, so I guess it is possible to install vista/windows 7 on this mobo after all.
Any suggestions welcome, as I'm completely out of ideas now!
