It really sucks because it's a driver that, when not installed, causes me to crash all the time! I've already tried disabling Windows Security Essentials' Real-Time Protection.
View 3 RepliesI have tried to repair from the disk and I have tried a system restore. It will only start in safe mode without extra functionality. It happened yesterday when my power after out ran.
View 2 Replies View Relatedmy computer was not booting up so last night I went to the built in startup repair in Windows 7 and through the command prompt did a "chkdsk c: /f /b" which I saw online. It took about 15 hrs to get where it is at now which it finished the stage 5 and now says "Free space verification is complete." I thought that meant it finished but im assuming not because it won't let me type in the CMD box. Its been at this point for about 2 hours now and im wondering if I should try to shut down and boot up my computer or wait out until it does more. Also during stage 4 it said a couple times that windows repaired bad clusters?
View 1 Replies View Relatedi got a prob with my Windows 7 after the installation n the first reboot,and Starting Up Services, it comes on Completing Installation screen when it ends, it doesnt reboot, neither turn off, it just stays on black screen for hours. with the computer working, and the mouses`s cursor moving.
Cant remember excactly the PC specs 2,6Ghz Intel CPU
Nvidia GeForce 7800 or smthng 512mb
4GB ram
2x120GB WD HDz
I've got a new Samsung laptop. For about a month now whenever I boot up the laptop it says "installation may take a few minutes""please wait." The thing is it doesn't install anything at all and is a nuisance. Also I checked the windows task manager and all it says it is is a 'install'. How can I stop it?
View 3 Replies View RelatedWhen I insert the disc and wait until the CD boots and the files loaded the installation screen appears and is just stuck. The mouse goes off and the keyboard is all so off. My configurations are Core i5 2400, 8GB ram
View 7 Replies View RelatedI can't logon into my computer because when windows boots then it will freeze on please wait without any hard drive noise. To fix it "temporally" i will need to boot on safe mode and them use system restore. Then when I shut down my computer and then tomorrow when I turn it on again it wiil freeze on please wait again.
View 1 Replies View RelatedI've had windows 7 for like 4 months now and i turned my computer on today and it was at the please wait screen for about 15 minutes so i forced shutdown by holding the power button and tried again but it will not go past the please wait screen right before the login prompt. I decided to try to run in a different mode and right now i am running in debugging services mode in which functions are limited.
View 1 Replies View RelatedSo a couple of days ago, my PC started hanging up on a "Please Wait" loading screen in between the "Starting Windows" screen (where the Windows logo forms from coloured orbs) and the user account selection screen. Sometimes I'd leave it half an hour and it still wouldn't load.To start with, I simply gave my PC a hard reboot, and the problem would go away. When this stopped working, I system restored, and then the problem disappeared. This morning however, I performed a system restore from safe mode, and now when I boot my PC, in whatever mode, I get the "Starting Windows" screen, then the PC hangs up on a black screen with only the mouse pointer active.
View 3 Replies View RelatedI need some help with my Windows 7 installation.
I've finally installed the RC build (7100 x64) on my Samsung SA11 notebook,
but after the installation of the latest nVidia drivers available for my card
I only get a black screen after I restart the PC. Any ideas?
I'm trying to install Win7 on my PC. I'm getting a black screen right before the language screen is suppose to be shown. This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.
I CHANGED the cd's for couple of times, this is not the cd. I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
I'm trying to install Windows 7 on my PC.I'm getting a black screen right before the language screen is suppose to be shown.This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.I CHANGED the cd's for couple of times, this is not the cd.I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
View 9 Replies View RelatedRight, straight to the point. I've recently been given a few parts of computer from my friends that has now been assembled into a working desktop.I've got Windows 7 saved as a .iso file on a usb-hdd. I manage to get it working up to the point where i click "Install Now" on the Windows 7 installer programme, then after a couple mins of loading once clicked it comes up with this message."A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."There are 3 options that come up with this pop up being "browse" "ok" and "cancel" After clicking "ok" it comes up with another message saying"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
View 9 Replies View RelatedI'm trying to install Windows 7. I've tried a full format and once it saves files and reboots it doesn't continue further it just starts from the beginning again. The HD has come from another PC that was working. Where can I start?
View 9 Replies View RelatedI wanted to install windows 7 on my notebook compaq. When I finish most of the steps. The first windows welcome screen can not load and stops just blue screen.
View 2 Replies View Relatedi was trying to upgrade my windows7 from 32 bit to 64 bit. i downloaded the ISO image and burned it to DVD by right clicking on the iso file, then open with, then widows disc image burner. now when i try to boot with the DVD and i get the "press any key to boot from cd or dvd" message with a black background. but if i press keys nothing happens and it remains same forever. why it doesnt proceed further ? what to do?
alternatively, i tried pressing F11 during restarting, then selecting cd or dvd for booting and hiting enter, but then also it takes me to the black screen with the "press any key to boot from cd or dvd" message and blinking cursor, if i press keys nothing happens !
Okay so i have this machine, acer m3100, that originally had windows vista. I tried to do a clean install of windows 7, with an original windows 7 installation cd.Everything would go okay until right after the computer restarts and goes to the part of COMPLETING INSTALLATION. At that moment my screen suddenly flashes with the blue screen of death. i wasnt able to right the error that shows up though. Then the computer restarts and goes to setup devices and right after that an error message appears saying, windows did not complete installation, due to an unexpected restart, restart the computer and restart the installation. If i click okay it will go into an endless loop. Restarting one time after another. So i thought i would install windows vista again. Try to make things the way they were before, but i get the same error. i'm only able to install xp. With XP everything works fine. I do want to be able to install windows 7 though.
View 2 Replies View RelatedWell this computer is brand new its supposed to have windows 7 its a Eee PC. A message pops up saying The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer, and then restart the installation.as far as I know new programs were not added and the installation was completed the first time. I already tried safe mode but it does not allow me.
P.S. its the mini so it has no cd rom to insert the cd and it did not come with a cd.
i have toshiba satellite A205 win 7 its been freezing a lot lately i dont know why so i tried to install Windows 7 OS again (its not genuine) i usually do this successfully if i get virus but i dont think its virus this time but during the installation it got stuck it passes the copying windows file up to completing installation but it says it needs to be restarted and i did this several times it either hangs up or tells me cannot be installed restart.whenever i start all over again a black screen comes up with listing windows 7 several times asking me to select 1.i select the latest but same thing happens allover cannot access safe mode either i tried to install win 7 ultimate geniune but same thing happens.i also tried the repairing option its not working keeps telling me to restart..i believe its the hdd thats corrupted.i need to get my files.
View 4 Replies View RelatedI am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
View 2 Replies View RelatedI have an acer aspire desktop, which I recently restored, or attempted to anyway. It has become stuck on a screen saying 'software installation' then a loading bar with 'installing nvidia vga 3d vision above it. it has been like this for at least ten hours, and seems to have gotten nowhere. I tried turning it off, but it just resumes in the same place, anyone know anything?
View 1 Replies View RelatedSystem Specifics:
Every part of the computer is completely new.Its a selfconfigured system...
Processor: AMD FX-8120 3,1GHz
Mainboard: Gigabyte GA-970-UD3 (BIOS F4)
RAM: DDR3 2x4GB 1600MHz
Graphics: Nvidia GeForce GTX 560 TI 1GB
SSD: 120GB SATA 6Gb/s
DVD: SATA Liteone iHas122
OS: Windows 7 Home Premium 64 Bit
So basically my problem is what is stated in the topic already.Windows loads the data off of the ORIGINAL (purchased it today) DVD, extracting files etc.Then after the Computer restarts and loads, the installation process comes back up again, and shows the "moving dots" behind "Finishing Installation Process" for about 10-15 seconds, then they freeze... i left it for 2 hours. Nothing happened.I tried unplugging everything during the reset, after another try to install it. It freezes.I tried the "Shift+F10" --> explorer.exe . It freezes.I tried a downloaded copy of Windows 7 Prof.... same thing, it freezes.I tried 3 different Sata2 HDDrives, same thing it freezes.
Ok, so earlier today i decided that i needed to restore my laptop to factory default. As you can see from the title, i use an acer laptop which means i used the acer Erecovery software. All went well at first, although it took a stangely long time at a screen which said "setup is starting." The problem now is, I am now stuck on the acer 'software installation screen!' It is stuck at 41/48 where it is trying to install clear.fi v1.0. I think i heard the sound of an error earlier which worries me as i dont want to force restart my laptop as it clearly says not to do that and doing this caused my hard-drive to break last time
View 4 Replies View RelatedIve just finished installing BitDefender and it asked me to´restart. and i did, but then i got stuck at the welcome screen. And it keept doing it all the time, Anyone know a solution??? I'd rather not install 7, again, because i have to many apps installed. btw, i can go into safe mode, can you fix it from there?
View 2 Replies View RelatedI have a Lenovo Thinkpad T400 with Windows 7 32 bit.When I got home today and wanted to turn my laptop on, I couldn't get past the startup screen, displaying the thinkpad welcome message. I have tried pressing the ThinkVantage button, and all the f buttons, esc, delete, nothing works.I have also tried inserting my Windows disc into the disc drive but that does nothing either.
View 3 Replies View RelatedYesterday I was listening to music until my netbook froze. When I restart it, the Asus eee grey screen came up and it is stuck there. Pressing F2 to go to set up did not work and pressing tab did not go to bios.
View 1 Replies View RelatedI now have another issue with my pretty new laptop. Windows won't start up. Well it starts up but when I get to the password screen and type that in my laptop just gets stuck on the welcome screen. I don't know what to do fix it. This all started last night when I accidentally pulled the power cord out of the wall and the CPU shut down. The battery pack wasn't in( didn't wanna bust my battery)
View 11 Replies View RelatedI Have a HP Dv4 Laptop runninh windows 7 that is not booting into windowsIt is getting stuck at the windows log on screenIt won't let me boot into safe mode.I was able to get all of the data off by using a Ubuntu CD and copying information to an external HD. The windows repair option is not working
View 10 Replies View RelatedI can't seem to shut down properly. It hangs on the shutting down screen and freezes (wheel stops spinning) I haven't managed to many BSODs but I have managed to get one, I've attached it. Any idea what the problem might be? I've tried restoring from previous restore point which then hung but windows said the restore was successfull
View 2 Replies View Relatedwindows 7 only gets pas welcome screen if chkdsk run first then rebooted again
View 1 Replies View Relatedlast night i installed some updates from windows update on my windows 7 Ultimate 64bit and then when i restarted my Computer at the point that it says welcome it doesnt open my Os i have to wait for like 3minutes and then it appears a Blue screen that says something about Physical memory and with big Letters this one... INTIALIZATION_FAILED i tried to make a fix of my startup but doesnt work itried to recover my windows in a previous date but i get the same and safe mode is not working at all..
View 6 Replies View Related