OS Installation Gets Stuck Can't Access Safe Mode Either
Oct 19, 2011
i have toshiba satellite A205 win 7 its been freezing a lot lately i dont know why so i tried to install Windows 7 OS again (its not genuine) i usually do this successfully if i get virus but i dont think its virus this time but during the installation it got stuck it passes the copying windows file up to completing installation but it says it needs to be restarted and i did this several times it either hangs up or tells me cannot be installed restart.whenever i start all over again a black screen comes up with listing windows 7 several times asking me to select 1.i select the latest but same thing happens allover cannot access safe mode either i tried to install win 7 ultimate geniune but same thing happens.i also tried the repairing option its not working keeps telling me to restart..i believe its the hdd thats corrupted.i need to get my files.
View 4 Replies
ADVERTISEMENT
Sep 11, 2010
When I start my computer everything seems to be working fine but after login it says Please Wait then freezes at Welcome screen and the cursor can be moved around the screen and shows the loading icon and the screen also flashes black every few seconds. I've restarted and attempted to access Safe Mode however it also freezes at Welcome screen. I went into the repair system screen and tried a system restore but it says there are no restore points available and I know I haven't deleted my restore points. I've tried disconnecting any of the hardware I've had installed but that hasn't helped either. There also isn't any faulty hardware. When it was last working it said there was a Windows update so I installed the update but when I tried to turn on the computer the next time thats when the problem started and I don't remember what the update was for. I upgraded from Windows Vista Home Basic 32-bit to Windows 7 Home Premium 32-bit about 2 months ago and up until now I've had no problems with it. What can I do?
Here are the system specs:
Dell Inspiron 530s
Intel Celeron 2.00 Ghz
3.00 GB DDR2 RAM (I added 2.00 gigs myself came with 1.00 gig from factory)
Windows 7 32-bit upgrade from Windows Vista Home Basic 32-bit
250 Gb Hard Drive
View 9 Replies
View Related
Jun 3, 2012
After attempting to start my Laptop in Safe Mode, it loaded drivers normally only to crash a few seconds later. A prompt message appears but is impossible to read because Windows immediately reboots upon showing the prompt.
View 1 Replies
View Related
Nov 25, 2012
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies
View Related
Nov 13, 2011
My parent's Desktop was having a side x side error and i've been trying to help her get it repaired. Her problem is that none of the programs will open except for internet explorer. All other applications give the sxstrace.exe error and won't open. I advised her to hit F8 and get into safe mode so I could try and help her further. She couldn't get that to work so I had her force safe mode through msconfig. That worked and got her into safe mode and she's still getting the sxs error and can't get anything to work for her. I advised her to go back into mconfig and uncheck the safe mode boot and wait til I come home and fix it. Now the problem is when she tries opening the msconfig, she gets an error on that saying it can't open the application with the error code 0xc000142 Now she's stuck in safe mode with no networking and the computer is basically useless. I'm 800 miles from home and won't be there until thanksgiving and i'm trying to help her over the phone so im kind of limited here. I was trying to get remote assist going for her but she couldn't install that either without the sxstrace.exe error.
they're running windows 7, If i remember correctly it's the x64 version.
View 3 Replies
View Related
Dec 31, 2012
Basically my hp 2000 screen is busted so I have been using a external display with that being said I had accidentally toggled te safe mode minimal option in MSCONFIG and my computer rebooted I have no way of seeing what's on the screen right now because it is not loading to my external display what are my options? I called hp and they just told me to get the display of the laptop changed
View 4 Replies
View Related
Mar 15, 2011
I can only boot up in safe mode Ive tried loading windows 7 disc to repair wont work in safe mode,did restore no luck,did panda safe disk reload did virus scan clean,did dskchk,tried start windows normal from f8 menu,last known good config etc.
View 3 Replies
View Related
Jul 23, 2012
My system is stuck in a boot loop while booting in safe mode,I was updating the drivers on my video card. I used driver cleaner pro to remove my old drivers. I then used msconfig to boot in safe mode with the minimal option selected. When the computer reboots I get to the screen to type in my password for 5 seconds an the computer reboots itself.
View 5 Replies
View Related
Sep 23, 2012
My Windows 7 ultimate x64 is rebooting itself at the welcome/logon screen, in safe mode only. Normal mode is fine. The reboot happens instantly, after a few seconds at the welcome screen, the screen goes black and the system is rebooted as though I had hit the "reboot" button on the case, with no clean shutdown taking place. I am at a loss to know what could be starting in safe mode, that _doesn't_ start in normal mode, to cause this.
I have recently done a repair install of windows (the problem was there before that), I have tried replacing the safe mode parts of the registry with clean ones downloaded from an AV vendor website (mcafee if I remember correctly), and have tried doing sfc /scannow which resulted in a corrupted boot.sdi being replaced with the archived copy. None of these have fixed the problem.
Obviously, given that I have a usable normal mode, and good backups, this isn't the biggest problem ever, but it would be nice to get it fixed especially for the next time I need to fix a dodgy driver install or similar. What I can check next, particularly in regards to understanding the startup process and what will be loading at the welcome screen that might be causing the reboot.
View 7 Replies
View Related
Oct 19, 2012
I went into msconfig on the work laptop and changed the boot to safe boot network, as soon as I went to boot up the laptop and get into safe mode, the laptop freezes at CLASSPNP.sys then I have to reboot.I need to get it to boot back into windows normally, but even selecting "Start windows normally" sends it to safe mode because I set it to boot there in msconfig. What can I possibly do? I've tried running start up repair but says it cannot repair the issue. Due to security, the laptop hard drive has been encrypted with truecrypt, and therefore when I put the OS DVD in to try and do something from the command prompt, there are no OS's listed as installed so cannot alter the bootmbr or any windows files.
View 1 Replies
View Related
Oct 13, 2011
I have windows 7 home premium 32 bit dell laptop. Lately, it takes more than 10 minutes before it boots before the windows logo appears). From there the computer works normally. I got a suggestion to check for malwares or viruses so that is what I did. I started by going to msconfig and edited the boot options to start automatically to safe mode with networking, then rebooted my system. After booting, it loaded up the initial screen of safe mode, but then it restarted by itself.
I am now stuck on this reboot loop going into safe mode, it won't even let me go back to normal mode. I went to startup repair, but it didn't find anything, so had to reboot again onto the same situation. I have searched for possible answers, and the best that I could get was to remove the safe boot options and go back to normal mode. The syntax to type was bcdedit /deletevalue {default} safe boot but it didn't work, same with bcdedit /deletevalue safe boot.
I am getting this : "An error occurred while attempting to delete the specified data element. Element not found."
View 6 Replies
View Related
Nov 13, 2011
none of the programs will open except for internet explorer. All other applications give the sxstrace.exe error and won't open. I advised her to hit F8 and get into safe mode so I could try and help her further. She couldn't get that to work so I had her force safe mode through msconfig. That worked and got her into safe mode and she's still getting the sxs error and can't get anything to work for her. I advised her to go back into mconfig and uncheck the safe mode boot and wait til I come home and fix it. Now the problem is when she tries opening the msconfig, she gets an error on that saying it can't open the application with the error code 0xc000142 Now she's stuck in safe mode with no networking and the computer is basically useless. I need help getting her going if anyone has any suggestions. I'm 800 miles from home and won't be there until thanksgiving and i'm trying to help her over the phone so im kind of limited here. I was trying to get remote assist going for her but she couldn't install that either without the sxstrace.exe error.they're running windows 7, If i remember correctly it's the x64 version.
View 2 Replies
View Related
Feb 26, 2012
my Dell Studio 1555 laptop will not boot either into regular windows or safe mode.When booting into safe mode, the very last file that will load is "CLASSPNP.SYS".When that happens it will stay stuck loading the next file for a few minutes, then restart itself into the Windows Error Recovery screen.When I try start-up repair, it goes to a blank black screen and repeats the procedure above (ie. it gets stuck and restarts a few minutes later) When I hard-shut down by pressing the power button, a BSoD appears for a fraction of a second right before it dies.What could the problem be, and what can I do to fix it? I have the windows 7 install disk, if needed. Should I go ahead and try an installation repair using the disk?
View 5 Replies
View Related
Sep 22, 2012
i just bought an asus u31s laptop a couple of weeks ago for school and all was great until today. it suddenly crashed and gave bsod. i was just on Internet or something, nothing special, but it had been running for a few hours. so now it won't boot up, it simply reboots constantly. i can't even get into safe mode. bios i can get into, but i'm unable to do anything, since it appears to freeze, when i get in there.
View 9 Replies
View Related
Feb 13, 2011
Like the title says, my computer is stuck on a black screen.I downloaded an update and was instructed to restart the computer. After restarting the computer it went to a black screen. It won't do anything past that. I've tried starting it in safe mode but always with the same result. I have no idea what to do with this short of taking it to Best Buy to have the geek squad take a look at it and frankly I don't feel like doing that.
View 2 Replies
View Related
Jan 18, 2013
my pc semi froze, wouldn't let me access control manager and browsers forze but other applications were working. So i decided to restart my pc and upon restarting it froze on the bootup screen (windows logo). I tryed accessing safe mode but got stuck on " windowssystem32DRIVERSCLASSPNP.SYS ". Once it crashes on the boot up and I press the reset button my main drive is no longer detected by my bios but when i fully shut down the pc and start it up again it gets detected no problem. I have browsed around and I have seen a lot of people stating it was bitdefender, but as I cannot gain access to my safe mode to restore or delete it I have no idea if it really is that. I would like to hear your suggestions on the problem, I could take my ssd out and put it in an external drive and plug it into my laptop to try and delete bitdefender but as its mounted to the floor of an antec 902 and its pretty jam packed in there id need to removed my gfx cards hard drive trays, and power supply just to get to it and that is something I really dont have the time for.
View 4 Replies
View Related
Jul 26, 2011
I am having a serious problem whenever I try and load windows it freezes at the main page. I can, however, access internet easily in safe mode.
View 2 Replies
View Related
Oct 27, 2012
Acer Aspire ZR7 model stuck on "Setup is starting services", never progresses.I can't locate o/s discs et.al.It will not open in safe mode using F8.I've also attempted Lft ALT + F10, no good And, F12 at Windows screen. No good.
View 7 Replies
View Related
Oct 14, 2012
I was on my computer today (Win 7) and programs just started shutting down and the computer reset. The computer starts back up (Asus) and when it gets to the point where windows starts, the screen goes black and there is a blinking cursor line. Not buttons work at that point.In my manual for the Asus and it says to select a boot device, press f8 when he Asus logo appears, to access Windows in Safe Mode press f8 after post. I start pressing f8 at all different times, but all I can get is the boot device menu or a blank screen.I put in the WIN 7 disc and told it to do a startup repair - it says nothing is wrong. I try a system recover from a few days ago, and it has an error and can't do anything.I was running Norton Virus and it didn't pick up anything before the crash, I also have Norton Ghost and I think I have a backup from a few days ago. But I can't seem to access anything
View 1 Replies
View Related
Oct 14, 2012
I was on my computer today (Win 7) and programs just started shutting down and the computer reset. The computer starts back up (Asus) and when it gets to the point where windows starts, the screen goes black and there is a blinking cursor line. Not buttons work at that point. In my manual for the Asus and it says to select a boot device, press f8 when he Asus logo appears, to access Windows in Salf Mode press f8 after post. I start pressing f8 at all different times, but all I can get is the boot device menu or a blank screen. I put in the WIN 7 disc and told it to do a startup repair - it says nothing is wring. I try a system recover from a few days ago, and it has an error and can't do anything. I was running Norton Virus and it didn't pick up anything before the crash, I also have Norton Ghost and I think I have a backup from a few days ago. But I can't seem to access anything.
View 1 Replies
View Related
Jan 26, 2013
I recently just put together my very first Gaming PC Build and everything looked fine. The Gpu was running, motherboard fine, everything except the Motherboard with the CPU. I have heard from a lot of people that AMD Phenom II x4 965G + ASUS Motherboard 760G just glitches out even though I can run the system up and play all of these high CPU dependable games like L4D PERFECTLY with out any problems what so ever. I reboot the computer I am sent to the black screen with "PRESS F8" to open Boot Menu or Bios" I believe. Press DEL for what ever and TAB for EZ FLASH 2, I already updated the correct bios update from ASUS website of my model Motherboard but this will not go away and I have no way to access the "F8" for Safe Mode and all the other options, I am using Windows 7 Home Premium.
View 4 Replies
View Related
Dec 26, 2012
I reinstalled Windows 7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer"I'm thinking there's got to be a simple registry key fix for this but am having a bear of a time finding anything applicable online.I don't have an urgent need to use Safe Mode, btw, just doesn't seem right not having it available should I need to
View 5 Replies
View Related
Sep 27, 2010
I forgot to plug in my computer and the battery died. When I tried turning it back on, it takes me directly to:
"Startup Repair - Your computer was unable to start. Startup Repair is checking your system for problems. If problems are found, start up repair will fix them automatically. Your computer might restart several times during this process. No changes will be made to your personal files or information. This might take several minutes."
Followed by a loading bar that says searching for problems. After leaving this on for a while it gives the system restore option, however this just takes me back to the previous screen. I cannot cancel the Start up repair and I can't access safemode. After searching for over an hour the only solution I've found so far is reinstall the OS, however my computer did not come with the OS disc and I have school related files on the computer that I can't lose.
I am using a Toshiba Satellite A505-S6981 T6600 That's 9 months old with windows 7, Specs (To my limited knowledge) say:
C2D 56600, 4GB DDR3
16", 400 GB HD, DVDRW
Windows 7 P 64 Bit, 80211bgn
View 9 Replies
View Related
Nov 6, 2012
Last thing I did on my laptop was download baseball team logos a couple days previous to problems.. Use mobile hotspot for internet and this is not working in SafeMode. These are the lap top specs, and can provide more if needed: [CODE]
View 9 Replies
View Related
Oct 10, 2012
Earlier this week my HP desktop forced shutdown while browsing the Internet using IE9. Upon reboot the HP screen loaded, afterwards a black screen with a flashing cursor appeared. I had used CTRL+ALT+DEL function in which my computer rebooted.Showed the HP screen and immediately showed the black screen with a flashing cursor. Again no mouse cursor was available. I performed a diagnostics check in which the CPU, HDD, etc. checked out, restored BIOS to factory settings, even placing the HDD as priority 1. I inserted the Windows recovery disk and attempted a start up repair, and a restore point with no favorable results. Through the recovery disks command prompt I accessed all my music and documents, so I assume the hard drive is still functioning. I'm thinking as a last resort of performing a repartitioning of my hard drive and performing a clean install of Windows 7.
View 2 Replies
View Related
Dec 30, 2012
my laptop looks like it has a massive problem. i have been on various forums for advice but unable to solve - this is the problem
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all.
i run Windows 7 on a Dell inspiron 1564
View 1 Replies
View Related
Dec 27, 2012
I reinstalled Win7 on my laptop yesterday (a recovery reinstall, not a clean one). The install worked fine, I'm able to boot up and use all my programs again no prob, but when I attempt to go into Safe Mode, it thinks Windows hasn't completed the install. While the message "Setup is starting services" is on the screen, a popup appears saying "Windows cannot complete installation in Safe Mode. To continue installing Windows, restart the computer".
View 10 Replies
View Related
Jul 26, 2012
My HP Pavillion G6 laptop recently had a hard disk (I think) error and I was forced to use a clean install to keep on using my computer. After the clean install, everything seems to be working fine and for a week or so there have been no problems whatsoever. Just this afternoon,my computer failed to start, it was stuck at the "Starting Windows" screen. Safe mode refused to work either, stuck at the loading drivers screen. I have not changed my computer in any way before. I tried to use startup repair and it went on FOREVER. LKGC failed too. I am currently contemplating another minimized image recovery, but i fear that my HD has failed. I am most confused as to why there were no warning signs after my clean install, computer ran just like when i first bought it. T
View 1 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
