Why Does MS Update Push 32 Bit Updates To 64 Bit Machine
Dec 26, 2011Why does MS update push 32 bit updates to my 64 bit machine?
View 3 RepliesWhy does MS update push 32 bit updates to my 64 bit machine?
View 3 Repliesupdate for VGA Graphics for EI-Machine Sorrento,(NOTE Windows 7 Update downloads the wrong update for driver,) have searched for an update 21/06/2006 version 6.1.7600.1635, requires and update in order to give hardware acceleration. It seems no update available unless someone knows different.
View 3 Replies View RelatedMy machine has been stuck on installing this update all night. I think my hard drive may be full, what should I do? Been meaning to format that thing and reinstall windows to it since its just a 40 gig SSD.
View 3 Replies View RelatedWindows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 Replies View RelatedIt appears to be solved, however Windows Update does not work. I get the message "Windows Update cannot currently check for updates because the service is not running. You may need to restart your computer." Needless to say, the restarts do not help. I also tried installing Windows Essentials for virus protection which could not receive updates. I have since uninstalled an am using Clamwin for virus protection.
View 7 Replies View RelatedI have tried updating them one-by-one but they still end up failing on me.
View 9 Replies View RelatedI've installed the updates upon request. It's been two days now and the pop up keeps on coming saying the same two updates available. I checked the update history and the updates were all installed successfully. These updates are actually a few years old and it's odd how they just popped up. The updates were for MS Framerwork KB2600217 and KB2656351
View 1 Replies View RelatedI'm having a problem with Windows Update. It's managed to install a few updates, bust most of the updates that it automatically finds fail to install (many important ones too - security updates, etc.). A bit frustrating. For the past couple of days, it tries to install the same two updates every time I turn off the computer. The process takes about 40 minutes. Then it shuts off without an error message. Afterwards, when I turn the computer on again, it doesn't say anything but there are once more two updates that need to be installed - the same ones. It's been quite frustrating. For now, I've got the updates turned off, so it won't try to install them any more, but that's only a workaround and no solution.
I think the problem might be connected with some other installations problems. I've tried to download the updates and install them manually, but it didn't work either; first it said that my virus scanner was interfering (I disconnected from the Internet, deactivated the virus scanner, and tried it again, which got a little bit further but not all the way). At the end I got a kind of dubious error message, which I sadly haven't written down, but it was similar to the ones that I got when I tried to install Microsoft Office and also was unable to get the installation to run through to the end. In both instances, the installation was almost done, after which I got a message that there was a problem with some assembly components, and then it undid the changes. This normally took more than an hour - 30 minutes for the installation to get to the point where it started over, an hour to get it to cancel itself. Haven't found a solution there, and that sucks, because I really need it. I've got a lot of files saved in OneNote format that I can't use and need for work.
The Office error messages led me to a couple of forums where it had worked out because people had updated their .NET framework. I can't do that because .NET is part of the OS framework in Windows 7, apparently. Then I read that some other people had just used Windows Update to update their OS, and then it worked. That's what led me to the discovery that my updates weren't working. I believe that that's got something to do with the problem.I've installed some software, but there's the problem with Windows - I can't install it at all. Not sure what to do here. Windows Update lets me look at the update history. I've found that I get the error code 643 for the two updates that have repeated over the past two days again and again. For the other ones it's a little different; they tried to install once and didn't work. For those, I get following code: 80080005.
I have windows 7 64 bit sp1, and when i check for updates it checks for updates with no results. I have let it run overnight and still nothing. It says checking for updates with the green line going back and forth, but never gets any results. Can someone help me with this it is very frustrating.
View 9 Replies View Relatedseveral of the Windows 7 machines on our domain here at work are reporting that windows could not search for new updates. We have just recently had a new server installed SBS2011 and then shorty after is when this issue sprang up. The windows xp machines are able to update fine.
View 9 Replies View RelatedDoes the Windows Update in 7 do an adequate job at updating drivers or is there really a practical use of any of the driver update software
View 4 Replies View Relatedfor a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).For some reason, it has decided not to recognize the drivers on my laptop.I have tried to uninstall and reinstall (no go).I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason no access yes I am Administrator).Reinstall again still no go.The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful still no printer. Now, it is unsuccessful again.I don't use the Fax component.The reinstall from the CD is successful, but when I plug in the printer, it fails."Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. [code] Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing.It never did this before when I was happily printing away from both computers.
I have no problem printing from the XP machine when it's plugged in there all is good there.I have been to the Canon website and downloaded the latest drivers, which installed perfectly, but again when I plug in the printer, it fails to install the fax driver and the printer won't work..I have also tried all of the various USB ports and ruled that out.I've also run the Hardware and Devices Troubleshooter also without success.Also, I don't know if this is relevant or not, but I can't even print to PDF. My CutePDF program is also not working. I thought this may have been a workaround until I got the printer working again, but no luck.CutePDF will go thought its processes (it's now ticked as default as my Canon is now longer even listed), up till the point where you need to name the file you're creating (that box doesn't appear) all you get to do is print, choose CutePDF, then it disappears no file or if there is, I have no idea where it's gone or what it's called can't find a trace of it.I have not downloaded or installed any other programs (except Windows Updates) in some time that could have caused this. I am at a loss. This is a business computer and printer and is causing much angst.I am running Windows7 (64bit) on an Acer Aspire Laptop (only 16 months old) Firefox 13.0.1.Also running Microsoft Fixit for Printers doesn't even detect the printer and tells me to install one it already is As does the Troubleshooter Does not detect the printer.
since i got my computer i try to windows update i get this error, windows update cannot currently check for updates cause the service isnt running try to reboot, ive done that and it didnt work and sometimes when i got into the update thing it freezes and not resopds.
View 9 Replies View RelatedEvery time I shut down, Windows Update installs the same 2 updates. It never gives an error message saying that the install failed. It just insists on doing it again. This is the update from last week, I guess. I'm afraid I'm at work and away from the affected computer. It's not critical, it's just annoying, bc shutdown now takes too long.
View 8 Replies View RelatedWindows Update no longer working. Cannot update .NET Framework or install security updates. Get persistent bluescreen errors related to PFN. Now experiencing Internet connectivity issues even though network hardware appears to be operating fine. Current anti-virus does not detect any issues. Can't reinstall my Windows 7x64 upgrade or SP1 - because cannot install updates. Ready to rebuild ground-up with new Windows 7 disk.
View 2 Replies View RelatedIm trying to install a new hard drive for my friends computer. I have a working Windows 7 boot disk, I've used it on my desktop I built as well as just checked using my laptop. It booted up fine the first time but I think it went wrong some how and all that popped up were weird symbols. Now every time I try booting it up again the "push any key to boot from CD" prompt is displayed and even though I push enter immediately the screen just goes blank to black. Sometimes it has a blinking white line on the top left corner.Ive tested both the hard drive and the cd on my laptop and everything runs fine.
View 1 Replies View RelatedI recently formatted my Dell Inspiron Duo netbook, with Windows 7 Home Premium 32bit. I installed all of the software which I run on it without any problems.When I try to update Microsoft Office 2010 Professional Plus (32bit) Windows Update only finds a few updates, and after they're installed it doesn't find anymore updates. It doesn't even find Office 2010 SP1.{Note: I had no problems with other updates like Microsoft Visual Studio 2010 or other Microsoft updates.I tried uninstalling Office 2010 and installing it again but nothing changed. The privacy settings which show up the first time you run an Office application I set it as "Recommended settings".I also tried downloading Office 2010 SP1 (32bit) and when I tried to run it an error came up saying something like version mismatch (I presume that you need to install other updates before running the setup & I also tried to download an other update but the same error came up.)
View 3 Replies View RelatedReading around, it seems like everyone seems to have issues getting updates to install.This is on a freshly installed copy of 7 Pro x64 SP1.And here it fails later (it only tries to install 3 updates. the Update readiness tool spends awhile using a single core of my computer to install only to fail)DIT: UPDATE: after trying over and over, looks like the update readiness tool finally installed! I didn't change anything... really strange.
View 5 Replies View RelatedOk over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit
So I checked to see if they failed and they were installed successfully!
I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.
I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.
I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!
edit (Ian): This thread has been split from an audio drivers topic, as it may be of use to others having C004F012 errors.
When I went to install the x64 drivers, I got a message saying that my Operating System was not compatible, but then it asked me if I wanted to run it under the correct settings, which I did and then it installed. As for the Windows Updates, I tryed to run them and I get "Windows could not search for new updates" and error code C004F012.
I have Windows 7 Ultimate and I have my Windows Update settings set to "Download updates but let me choose whether to install them." The reason I use this setting is because even though I usually install the updates (because mostly they improve things), sometimes I'll see an update that I know I do not want to install. So I want to have control over which updates get installed.However, I ALWAYS want to install the latest "Definition Update For Microsoft Security Essentials", and since those updates are released very frequently, it's very annoying to always have to install them manually. Is there a way that I can have ONLY those definition updates installed automatically while still leaving it so that all other updates are not automatically installed?
View 5 Replies View Relatedmy acer laptops keyboard does nothing when i push any buttons. is there a setting to turn it on and off? or is the keyboard broken?
View 4 Replies View RelatedThis is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.So in summary:Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - Success I've tried most of the proposed solutions I found on the internet. 've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change. I've turned of the power setting on my network adapters - no change
View 1 Replies View Relatedi have problem, when i push shutdown computer it shut down and after 2 seconds it turn on. What can be the problem? Hardware or system problem?
View 9 Replies View RelatedThis is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.
So in summary: Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - SuccessI've tried most of the proposed solutions I found on the internet. I've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change.I've turned of the power setting on my network adapters - no change. I've turned off the Remote Differential Compression - no change. I've tried the file transfer in Safe Mode - no change.
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI have Hp Pavillian, Windows 7 Home Premium Edition, 64bit system. Everytime Windows downloads Windows updates, it is successfull downloading and installing, however, I then get a message saying: Failure configuring Windows Updates, Reverting Changes, Do Not turn off your computer.
I have gotten Windows Fixit for Windows Updates and installed....but that does not clear up the problem. I have not wanted to use Restore feature of Windows 7, since I have installed many critical programs that I use. Is there any other solution out in Cyberspace that will help resolve the "Failure Configuring Windows Updats".
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
when booting up windows 7 why do I have to key in F1 for windows to start up
View 1 Replies View Related