This is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.
So in summary: Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - SuccessI've tried most of the proposed solutions I found on the internet. I've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change.I've turned of the power setting on my network adapters - no change. I've turned off the Remote Differential Compression - no change. I've tried the file transfer in Safe Mode - no change.
This is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.So in summary:Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - Success I've tried most of the proposed solutions I found on the internet. 've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change. I've turned of the power setting on my network adapters - no change
For some reason I am not able to transfer large files to my Windows Home Server (home build). The file will start to transfer then just stop and error out.
The error message says Network Error: There is a problem accessing serverfolder.
This is on a wired connection so I dont know why it would just be dropping the connection. I can still surf the internet fine during this time.
Realtek RTL8169/8100 network cart, cat5e cable, 10/100 netgear 24 port unmanaged switch, WRT54GL router(tomato firmware). NICs are set to auto negotiate.
Any ideas what could be causing this?
I attached a screen shot of the error message and network monitor.
I'm using Windows 7 Ultimate with a 6-core AMD processor, 16GB RAM, SSD as primary. Whenever I transfer a large file over the network to another system the mouse and other applications will persistently hang for a second here and there as long as the transfer is in progress. I'm sending 8-10GB files over from the secondary 2TB 5400RPM drive and no resources are showing as maxed out so I don't get it. I'm thinking of trying a 3rd party file transfer solution again, but this still shouldn't be happening with the default.
I am trying to map a network drive with an address like this: Quote: [URL] It's basically a folder on the school network, I can access this folder and view its contents perfectly fine through an internet browser, but when I try to map a network drive to it, it doesn't work, I keep getting errors like this: Quote: A device attached to the system is not functioning Why do I keep getting this message? And why am I able to access that folder through a browser but not through windows? I am using Windows 7 btw.
my previous computer - running windows xp - got seriously infected. couldn't do anything to resolve it, so i bought a new dell computer (inspiron 580) running windows 7. i had backed up about 100 gbs of files on an external drive, but when i look at the drive now on my new computer i can see that there is an enormous amount of space being used, but i cannot see (nor open) the files that are there!
I was just recently moving some of my files from My C drive to E. It was all going smoothly as I had done it before but, this time instead of copy and pasting I dragged and dropped the files over. I was doing this to cut down space on my C drive, to my surprise though I saw it was increasing (drive C) by every file I had put on E. I would like to know if I had done something wrong or what happened I started at 148GBs stored and it increased to 156GBs. If it helps I was moving games from my x86 program files.
I had backed up (on my main hdd) several pictures/documents/movies from an old harddrive several years ago- recently i tried to access it and while i can see the whole file structure and names and even information im unable to open any of them- this is almost across the board with the exception of maybe a couple files. I wonder if it could maybe that these are from a different windows based os and maybe incompatible with this computer? could it be a 32bit/64bit problem? or maybe a different file system?
I have taken ownership of all the files and folders on an old hard drive, but am still unable to access many of these files. When checking in the Security tab, I see myself as the owner with full admin permissions, but still cannot open the files
I've used disc analyze and it shows 4 tmp files that are 4gb in size and they are in C:$Recycle.Bin and I would like to know what are they and if necessary how can I erase them bay the way my computer feels sluggish and my internet traffic is huge (it shouldn't be) so I was wondering does this has to do with it?
Just about every time I try to permanently delete a large file or folder, either by shift/delete or emptying the recycle bin the operation hangs up.The little window opens and it counts up the size of the file and that it. Nothing else overtly happens. The status bar never starts indicating and the window just sits there with the little green lights chasing each other across it. If I try to cancel or close the window it nothing happens.During the time all this is going on, I can hit ctrl/alt/del and select Task Manager and it simply goes back to the desktop with this window still squatting there doing it's thing. I have pinned TM to the task bar and tried starting it from there but it never starts. Eventually everything just slows to a stop and nothing works which would seem to indicate some kind of memory leak. There are no error messages during any of this.I have to hit reset and restart the computer that way in order to regain control and we all know how bad an idea this is. I've already had my boot sector eaten once causing me to have to do a total rebuild and I'd prefer not to have to do it again.
I usually send clients large images around 4Mb via the email. I also upload to various sites, files up to 15Mb. They are all usually jpeg or .psd format.
For some reason it just doesn't work anymore - they get so far and seem to just hang. I contacted my ISP provider and they went through all their trouble shooter but told me that the problem is my end.
I am using Windows 7 64 bit. I have tried IE9 and Google Chrome but neither helps. I use Microsoft Security Essential. I have tried turning off the firewall but this doesn't work either.
Smaller versions of the jpegs seem to upload OK. I haven't done anything to change what I am using recently other than to run the automatic updates.
I have internet satellite using an ipstar modem. No router.
I have a video file that is 5+GB. Windows is telling me it can't move it because it is too large, even though there is ample space in the directory I'm moving it too
I am running Windows 7 x64 and my computer drastically slows down after opening or transferring large files >1GB. If I reboot the system everything is fine again.
I tried burning a 11minute and a 23 minute long movie in windows 7 media player but I get a message indicating that the files are too large to be burnt. I have previously burnt to disc a lot longer movies
Is it possible to connect a drive to my WiFi router so that all WiFi devices could access the drive to store and share data i.e. Photo's, downloads, music etc?
Devices consist of netbooks (Windows 7) and android tablets and android phones.
If you set the view to Extra Large Icons for video media files, it shows a screen capture from an instant very early in the video file (like in the first 5 seconds or something). Is there a way to modify what point in the video file the screenshot is taken from?
I'm renaming some songs but when I do this I get this message:But my filename is not that long! Here is how long I can make it before my keyboard does not enter characters. They just don't show up when I type.
I run a software tool that often generates 75,000 - 100,000 small files that need to be deleted after the software exits. Right now, it can take 8 - 10 minutes to permanently delete all these files from a single run, and I usually have 4 - 8 runs to deal with, so do the math. I have tried shift-del to permanently delete but it doesn't work - Windows still copies everything to the recycle bin. Also, while moving the files to the recycle bin, I often get an error message: "Error 0x80070050: The file exists." Bottom line is that it takes a *really* long time just to delete these files and I need a quicker way to do it.
I have a 30 GB file on my desktop and I want to move it to an external hard drive. In Win 7 it just won't go! Cut/paste, move to, nothing. How can it be done?
Just installed Windows 7 64 Home Pro from XP two days ago. The last remaining issue I need to solve is a drag and drop file transfer to my other home network computer (HNC).o far I've been able to d&d files from the HNC via Acronis WD in it's explorer mode without any issues, some sized in the multi Gb range. I'When I try to d&d a large file, specifically my NVIDIA drivers sized at 123Mb the Windows 7 computer freezes immediately. The cursor is stuck and the computer is absolutely locked, the only thing that works to recover it is the power off button.When I come back I don't get any indication of anything going wrong and if I look on the HNC drive the file has been transferred successfully
So I have a a hard drive that is connected my router and shows up as a network location in My Computer. I was wondering if my bandwidth is used when I'm transferring files back and forth from my network drive and my laptop? How about watching videos from my network drive on my laptop?
I'm trying to set up two way sync between some files on my laptop and a network drive so that changes made to either the copy on the network or on my laptop get propagated to each other. I've read the instructions for setting up an "offline file" sync, which is a one way sync. The instructions usually mention that it's possible to set up a two-way sync, but they never actually describe how to do it.
Having a weird problem with a LaCie 1TB Network space. It is plugged into my router and i can see it on my windows 7 computer, map its folder as a network drive and even create folders/new word documents on it.
However whenever i try and copy a file larger than a few kB my entire computer freezes (completely unresponsive). The computer recovers fine on a hard reboot.
Any Ideas?
Also my computer freezes after being left on for a while (this may be due to utorrent, saw some mention of it causing windows to crash after an hour).
I have been suggested to keep my data in a separate drive than my operating system.
Actually, my hard drive is partitioned in two drives, c: and F:
I want to transfers my directory c:user to f:user. I did try to copy between them, but some files where not transferred
So what is the best way to do that. After, do I need to do special thing to make sure that all the references will be followed to the new files positions, IE when accessing them via my task manager
Am looking for a free service that would let me send a 30gb file via email if this possible, or somewhere even I could upload the file too for someone to get access too.
I am trying to get several peoples opinion. I believe that a small disk that is bootable similar to a ssd is better that a large one full of data. There is less disk to deframent and it should be faster. The larger data disk will contain most of the files many of which will not be used a large part of the time. One can keep larger files such as pictures or videos in that data disk. I probably prefer a small ssd(less than 100GB) but am not sure that is the best way to go right now. Later on when the price and quality of ssd goes down I could substitute that drive for the small hd partition or drive.
how to move all my files from my internal harddrive to my external harddrive. Everytime I try to transfer my files it will transfer for like 1GB and then it will freeze and restart.
I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
When i start downloading large data files with multiple connections (it does not matter which download manager i use - flash get, jdownloader, IDM) it starts to consume a lot of MB until it consumes all of it, but when i close the download manager only about 200 MB becomes free (before downloading started i had used only 900/2048 MB and after closing download manager, it is used ~1800 MB / 2048 MB and there is no program in task manager which would consume such a lot of memory and i can free the ram only by restarting computer. This happens to me on celan RC version and even on clean RTM version.
I have quite a fast conenction 50/50 Mbps so the RAM runs out quite fast (in 15 minutes i have no free ram).
This happens only in Windows 7 (in Vista, XP it downloads without any memory leak using the same download managers)
Does anyone have the same problem or know how to solve it?