For some reason I am not able to transfer large files to my Windows Home Server (home build). The file will start to transfer then just stop and error out.
The error message says Network Error: There is a problem accessing serverfolder.
This is on a wired connection so I dont know why it would just be dropping the connection. I can still surf the internet fine during this time.
Realtek RTL8169/8100 network cart, cat5e cable, 10/100 netgear 24 port unmanaged switch, WRT54GL router(tomato firmware). NICs are set to auto negotiate.
Any ideas what could be causing this?
I attached a screen shot of the error message and network monitor.
Just installed Windows 7 64 Home Pro from XP two days ago. The last remaining issue I need to solve is a drag and drop file transfer to my other home network computer (HNC).o far I've been able to d&d files from the HNC via Acronis WD in it's explorer mode without any issues, some sized in the multi Gb range. I'When I try to d&d a large file, specifically my NVIDIA drivers sized at 123Mb the Windows 7 computer freezes immediately. The cursor is stuck and the computer is absolutely locked, the only thing that works to recover it is the power off button.When I come back I don't get any indication of anything going wrong and if I look on the HNC drive the file has been transferred successfully
This is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.So in summary:Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - Success I've tried most of the proposed solutions I found on the internet. 've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change. I've turned of the power setting on my network adapters - no change
This is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.
So in summary: Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - SuccessI've tried most of the proposed solutions I found on the internet. I've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change.I've turned of the power setting on my network adapters - no change. I've turned off the Remote Differential Compression - no change. I've tried the file transfer in Safe Mode - no change.
I'm using Windows 7 Ultimate with a 6-core AMD processor, 16GB RAM, SSD as primary. Whenever I transfer a large file over the network to another system the mouse and other applications will persistently hang for a second here and there as long as the transfer is in progress. I'm sending 8-10GB files over from the secondary 2TB 5400RPM drive and no resources are showing as maxed out so I don't get it. I'm thinking of trying a 3rd party file transfer solution again, but this still shouldn't be happening with the default.
about to do a major hardware upgrade on one of the win7 PCs in the house (will call it PC A), pretty much building a new computer so expecting to have to do a reinstall of the os like i did when upgrading my gaming pc (which will be PC B ). trying to backup important files on PC A by copying them over the network to PC B but am so far unsuccessful.
both computers are running 64bit win7 ultimate. both can see each other and access each others shares fine. just can't copy files over.
trying to copy the files from PC A to one of the slave drives on PC B on both PCs: the drives are shared, network discovery is on, password protected sharing is off, file and printer sharing is on. also tried going directly to the folder on PC B and setting the permissions so that 'everyone' had 'full control'
i don't see anything that would cause an issue. yet when i am on PC A trying to copy files to PC B it says that i need permission to copy the files.
i could send them from PC A to PC B instead of having to copy everything to the public documents folder in PC A and using PC B to grab them.
I used XP Transfer Wizard to store my files (over 200GB) on external hard drive. Now I have Windows 7 machine and can't use them directly.I tried to use Virtual PC XP mode to import files but Virtual PC can only handle something around 136 GB virtual hard disk, so after 6 hours of transfer it stopped... I don't have the XP machine anymore - I'm stuck with Windows 7 and can't figure out how to move these files over..Is there a way to actually open all these Wizard IMGXXXXX.dat files and read them?
I've used disc analyze and it shows 4 tmp files that are 4gb in size and they are in C:$Recycle.Bin and I would like to know what are they and if necessary how can I erase them bay the way my computer feels sluggish and my internet traffic is huge (it shouldn't be) so I was wondering does this has to do with it?
a friend of mine is trying to access files residing on a vista pc residing on the same network as his 7 pc in order to copy them over. cunningly, both pcs have exactly the same network name albeit one in capitals and one in lowercase although i am pretty sure this does not mkae a difference. can anyone tell if this is where the problem lies, especially since another vista pc on the network shows up fine
Just about every time I try to permanently delete a large file or folder, either by shift/delete or emptying the recycle bin the operation hangs up.The little window opens and it counts up the size of the file and that it. Nothing else overtly happens. The status bar never starts indicating and the window just sits there with the little green lights chasing each other across it. If I try to cancel or close the window it nothing happens.During the time all this is going on, I can hit ctrl/alt/del and select Task Manager and it simply goes back to the desktop with this window still squatting there doing it's thing. I have pinned TM to the task bar and tried starting it from there but it never starts. Eventually everything just slows to a stop and nothing works which would seem to indicate some kind of memory leak. There are no error messages during any of this.I have to hit reset and restart the computer that way in order to regain control and we all know how bad an idea this is. I've already had my boot sector eaten once causing me to have to do a total rebuild and I'd prefer not to have to do it again.
I have been suggested to keep my data in a separate drive than my operating system.
Actually, my hard drive is partitioned in two drives, c: and F:
I want to transfers my directory c:user to f:user. I did try to copy between them, but some files where not transferred
So what is the best way to do that. After, do I need to do special thing to make sure that all the references will be followed to the new files positions, IE when accessing them via my task manager
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
I usually send clients large images around 4Mb via the email. I also upload to various sites, files up to 15Mb. They are all usually jpeg or .psd format.
For some reason it just doesn't work anymore - they get so far and seem to just hang. I contacted my ISP provider and they went through all their trouble shooter but told me that the problem is my end.
I am using Windows 7 64 bit. I have tried IE9 and Google Chrome but neither helps. I use Microsoft Security Essential. I have tried turning off the firewall but this doesn't work either.
Smaller versions of the jpegs seem to upload OK. I haven't done anything to change what I am using recently other than to run the automatic updates.
I have internet satellite using an ipstar modem. No router.
I have a video file that is 5+GB. Windows is telling me it can't move it because it is too large, even though there is ample space in the directory I'm moving it too
I am running Windows 7 x64 and my computer drastically slows down after opening or transferring large files >1GB. If I reboot the system everything is fine again.
I tried burning a 11minute and a 23 minute long movie in windows 7 media player but I get a message indicating that the files are too large to be burnt. I have previously burnt to disc a lot longer movies
I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
Windows Easy Transfer can't transfer your files and settings.
The message pops up only a few seconds after the transfer begins.Why is this?! I need those files and windows has screwed me.Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings.Same system language as before.BTW I'm on a Toshiba L505 laptop running Windows 7 Home Premium.
I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use.This new user account has the same unique name of the user account I am trying to restore but that's where the similarity ends.All the settings for this account are default settings and empty folders.
If you set the view to Extra Large Icons for video media files, it shows a screen capture from an instant very early in the video file (like in the first 5 seconds or something). Is there a way to modify what point in the video file the screenshot is taken from?
I'm renaming some songs but when I do this I get this message:But my filename is not that long! Here is how long I can make it before my keyboard does not enter characters. They just don't show up when I type.
I run a software tool that often generates 75,000 - 100,000 small files that need to be deleted after the software exits. Right now, it can take 8 - 10 minutes to permanently delete all these files from a single run, and I usually have 4 - 8 runs to deal with, so do the math. I have tried shift-del to permanently delete but it doesn't work - Windows still copies everything to the recycle bin. Also, while moving the files to the recycle bin, I often get an error message: "Error 0x80070050: The file exists." Bottom line is that it takes a *really* long time just to delete these files and I need a quicker way to do it.
I have a 30 GB file on my desktop and I want to move it to an external hard drive. In Win 7 it just won't go! Cut/paste, move to, nothing. How can it be done?
Am looking for a free service that would let me send a 30gb file via email if this possible, or somewhere even I could upload the file too for someone to get access too.
I am trying to get several peoples opinion. I believe that a small disk that is bootable similar to a ssd is better that a large one full of data. There is less disk to deframent and it should be faster. The larger data disk will contain most of the files many of which will not be used a large part of the time. One can keep larger files such as pictures or videos in that data disk. I probably prefer a small ssd(less than 100GB) but am not sure that is the best way to go right now. Later on when the price and quality of ssd goes down I could substitute that drive for the small hd partition or drive.
how to move all my files from my internal harddrive to my external harddrive. Everytime I try to transfer my files it will transfer for like 1GB and then it will freeze and restart.
I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
When i start downloading large data files with multiple connections (it does not matter which download manager i use - flash get, jdownloader, IDM) it starts to consume a lot of MB until it consumes all of it, but when i close the download manager only about 200 MB becomes free (before downloading started i had used only 900/2048 MB and after closing download manager, it is used ~1800 MB / 2048 MB and there is no program in task manager which would consume such a lot of memory and i can free the ram only by restarting computer. This happens to me on celan RC version and even on clean RTM version.
I have quite a fast conenction 50/50 Mbps so the RAM runs out quite fast (in 15 minutes i have no free ram).
This happens only in Windows 7 (in Vista, XP it downloads without any memory leak using the same download managers)
Does anyone have the same problem or know how to solve it?
System build 11 months ago Windows 7 Pro x64 Full Retail AMD Phenom II X6 1090T ASUS M4A88T-V EVO/USB3 (AM3) 16.0 GB Dual-Channel DDR3 @ 666MHz (9-9-9-24) AMD Radeon HD 6950 250GB M4-CT256M4SSD2 ATA Device (SATA-SSD) (OS) 1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA) 1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
I get BSOD sometimes when playing Battlefield 3, sometimes I don't get it. I also get BSOD when transferring large files from external hard drives or from my internal network.
My main HDD is comfigured into two partitions, C: for Windows 7 and D: for data/downloads/etc. Whenever I copying a large file from Partition D: to Partition C: and vise versa, the transfer slows down to a crawl and the HDD activity light on my case stops blinking.
Everything is so slow e.g. opening of FireFox, opening of Excel, opening of Task Manager etc. While I'm copying 750GB of data from one partition to another partition, why? I'm running Windows 7 x64 7100 on a separate partition and I have a Q6600, 4GB ram and 5 X 1 TB WD Black edition drives...Task Manager is showing 33 running processors, 3 - 5 % CPU usage and 1.35GB of ram usage. Is this a Windows 7 bug? Windows 7 is super fast when I'm not copying/transferring large files between partitions!