I've used disc analyze and it shows 4 tmp files that are 4gb in size and they are in C:$Recycle.Bin and I would like to know what are they and if necessary how can I erase them bay the way my computer feels sluggish and my internet traffic is huge (it shouldn't be) so I was wondering does this has to do with it?
View 3 RepliesJust about every time I try to permanently delete a large file or folder, either by shift/delete or emptying the recycle bin the operation hangs up.The little window opens and it counts up the size of the file and that it. Nothing else overtly happens. The status bar never starts indicating and the window just sits there with the little green lights chasing each other across it. If I try to cancel or close the window it nothing happens.During the time all this is going on, I can hit ctrl/alt/del and select Task Manager and it simply goes back to the desktop with this window still squatting there doing it's thing. I have pinned TM to the task bar and tried starting it from there but it never starts. Eventually everything just slows to a stop and nothing works which would seem to indicate some kind of memory leak. There are no error messages during any of this.I have to hit reset and restart the computer that way in order to regain control and we all know how bad an idea this is. I've already had my boot sector eaten once causing me to have to do a total rebuild and I'd prefer not to have to do it again.
View 5 Replies View RelatedI usually send clients large images around 4Mb via the email. I also upload to various sites, files up to 15Mb. They are all usually jpeg or .psd format.
For some reason it just doesn't work anymore - they get so far and seem to just hang. I contacted my ISP provider and they went through all their trouble shooter but told me that the problem is my end.
I am using Windows 7 64 bit. I have tried IE9 and Google Chrome but neither helps. I use Microsoft Security Essential. I have tried turning off the firewall but this doesn't work either.
Smaller versions of the jpegs seem to upload OK. I haven't done anything to change what I am using recently other than to run the automatic updates.
I have internet satellite using an ipstar modem. No router.
Every couple of weeks I get a strange large file with a title that doesn't make any sense. What is this file and is it necessary to keep them?
View 4 Replies View RelatedI have a video file that is 5+GB. Windows is telling me it can't move it because it is too large, even though there is ample space in the directory I'm moving it too
View 7 Replies View RelatedI am running Windows 7 x64 and my computer drastically slows down after opening or transferring large files >1GB. If I reboot the system everything is fine again.
View 6 Replies View RelatedI tried burning a 11minute and a 23 minute long movie in windows 7 media player but I get a message indicating that the files are too large to be burnt. I have previously burnt to disc a lot longer movies
View 2 Replies View RelatedIf you set the view to Extra Large Icons for video media files, it shows a screen capture from an instant very early in the video file (like in the first 5 seconds or something). Is there a way to modify what point in the video file the screenshot is taken from?
View 3 Replies View RelatedI'm renaming some songs but when I do this I get this message:But my filename is not that long! Here is how long I can make it before my keyboard does not enter characters. They just don't show up when I type.
View 9 Replies View RelatedI run a software tool that often generates 75,000 - 100,000 small files that need to be deleted after the software exits. Right now, it can take 8 - 10 minutes to permanently delete all these files from a single run, and I usually have 4 - 8 runs to deal with, so do the math. I have tried shift-del to permanently delete but it doesn't work - Windows still copies everything to the recycle bin. Also, while moving the files to the recycle bin, I often get an error message: "Error 0x80070050: The file exists." Bottom line is that it takes a *really* long time just to delete these files and I need a quicker way to do it.
View 8 Replies View RelatedFor some reason I am not able to transfer large files to my Windows Home Server (home build). The file will start to transfer then just stop and error out.
The error message says Network Error: There is a problem accessing serverfolder.
This is on a wired connection so I dont know why it would just be dropping the connection. I can still surf the internet fine during this time.
Realtek RTL8169/8100 network cart, cat5e cable, 10/100 netgear 24 port unmanaged switch, WRT54GL router(tomato firmware). NICs are set to auto negotiate.
Any ideas what could be causing this?
I attached a screen shot of the error message and network monitor.
I have a 30 GB file on my desktop and I want to move it to an external hard drive. In Win 7 it just won't go! Cut/paste, move to, nothing. How can it be done?
View 5 Replies View RelatedThis is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.So in summary:Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - Success I've tried most of the proposed solutions I found on the internet. 've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change. I've turned of the power setting on my network adapters - no change
View 1 Replies View RelatedAm looking for a free service that would let me send a 30gb file via email if this possible, or somewhere even I could upload the file too for someone to get access too.
View 9 Replies View RelatedI am trying to get several peoples opinion. I believe that a small disk that is bootable similar to a ssd is better that a large one full of data. There is less disk to deframent and it should be faster. The larger data disk will contain most of the files many of which will not be used a large part of the time. One can keep larger files such as pictures or videos in that data disk. I probably prefer a small ssd(less than 100GB) but am not sure that is the best way to go right now. Later on when the price and quality of ssd goes down I could substitute that drive for the small hd partition or drive.
View 7 Replies View Relatedhow to move all my files from my internal harddrive to my external harddrive. Everytime I try to transfer my files it will transfer for like 1GB and then it will freeze and restart.
View 1 Replies View RelatedI have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
View 1 Replies View RelatedThis is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.
So in summary: Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - SuccessI've tried most of the proposed solutions I found on the internet. I've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change.I've turned of the power setting on my network adapters - no change. I've turned off the Remote Differential Compression - no change. I've tried the file transfer in Safe Mode - no change.
When i start downloading large data files with multiple connections (it does not matter which download manager i use - flash get, jdownloader, IDM) it starts to consume a lot of MB until it consumes all of it, but when i close the download manager only about 200 MB becomes free (before downloading started i had used only 900/2048 MB and after closing download manager, it is used ~1800 MB / 2048 MB and there is no program in task manager which would consume such a lot of memory and i can free the ram only by restarting computer. This happens to me on celan RC version and even on clean RTM version.
I have quite a fast conenction 50/50 Mbps so the RAM runs out quite fast (in 15 minutes i have no free ram).
This happens only in Windows 7 (in Vista, XP it downloads without any memory leak using the same download managers)
Does anyone have the same problem or know how to solve it?
System build 11 months ago
Windows 7 Pro x64 Full Retail
AMD Phenom II X6 1090T
ASUS M4A88T-V EVO/USB3 (AM3)
16.0 GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
AMD Radeon HD 6950
250GB M4-CT256M4SSD2 ATA Device (SATA-SSD) (OS)
1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
I get BSOD sometimes when playing Battlefield 3, sometimes I don't get it. I also get BSOD when transferring large files from external hard drives or from my internal network.
My main HDD is comfigured into two partitions, C: for Windows 7 and D: for data/downloads/etc. Whenever I copying a large file from Partition D: to Partition C: and vise versa, the transfer slows down to a crawl and the HDD activity light on my case stops blinking.
View 9 Replies View RelatedEverything is so slow e.g. opening of FireFox, opening of Excel, opening of Task Manager etc. While I'm copying 750GB of data from one partition to another partition, why? I'm running Windows 7 x64 7100 on a separate partition and I have a Q6600, 4GB ram and 5 X 1 TB WD Black edition drives...Task Manager is showing 33 running processors, 3 - 5 % CPU usage and 1.35GB of ram usage. Is this a Windows 7 bug? Windows 7 is super fast when I'm not copying/transferring large files between partitions!
View 9 Replies View RelatedI'm using Windows 7 Ultimate with a 6-core AMD processor, 16GB RAM, SSD as primary. Whenever I transfer a large file over the network to another system the mouse and other applications will persistently hang for a second here and there as long as the transfer is in progress. I'm sending 8-10GB files over from the secondary 2TB 5400RPM drive and no resources are showing as maxed out so I don't get it. I'm thinking of trying a 3rd party file transfer solution again, but this still shouldn't be happening with the default.
View 5 Replies View RelatedWhen trying to run ipconfig using the cmd it returns nothing. Also, when downloading large files my internet will stop working and then start working after a while. OS is Windows 7 Ultimate x64?
View 1 Replies View RelatedWhenever I view a folder which contains .MP4 (H264) video files in large icon view (shows thumbnails), Windows 7's Explorer crashes. Explorer loads for a few seconds, the green progress bar shows up, and then boom!, Explorer crashes. The thumbnails are not shown before crashing.I tried setting Folder options to 'Always show icons, never thumbnails' (disables thumbnails) on the same folder with MP4 (H264) video files and Explorer doesn't crash if the MP4 thumbnails aren't shown. I tried testing in other folders containing other video formats (with 'Always show icons, never thumbnails' set to off) like .AVI/Xvid, without an MP4/H264 file, and Windows Explorer shows the thumbnails fine without crashing.
I have not currently experienced problems with other formats, only MP4/H264. The only media players that I have installed are KMPlayer and VLC Media Player which both do not install external codecs, AFAIK. The only external codec I have installed is CoreAVC, but I have been using CoreAVC for months (KMPlayer+CoreAVC is one of the first things I installed in Windows 7) without any problems (this issue just arose a few days ago).I am using Windows 7 Ultimate, 32 bit.
a number of backup copies of large files on external USB-connected NTFS drives differed from the source versions still on my hard drive. I also discovered that I could reproduce the issue with newly-copied files.Here are the specifics of the issue, following a series of experiments:
- On my system, copies of large files, files typically larger than 500MB, are corrupted (altered) roughly 30% of the time when copying them under Windows 7 64-bit to USB-connected NTFS-formatted external drives.
- No error occurs / no error message appears during the copy
- The file size of copy is always identical, whether or not data was altered during the copy process.
- File differences are confirmed via either the command-line "FC" command or a utility such as WinDiff
- The issue impacts copies made via the Windows GUI -OR- via command-line copy or xcopy
- The issue occurs with multiple external USB NTFS-formatted drives, no matter what make or model.
- Subsequent attempts to copy an affected file will ultimately yield an identical copy. This would seem to rule out interference by an external program such as an anti-virus program (and the only AV I am running is Microsoft Security Essentials)
- The USB drives involved pass error checks, and copies made to these drives on other (non Windows 7) systems produce identical copies
- So far, the third party utility "TeraCopy" manages to consistently produce clean copies, and therefore is a temporary workaround. This utility apparently works because it, by default, bypasses the NTFS memory caching operation used by the Windows 7 OS...a caching system which I have so far found no way of disabling.
- The problem does not appear to impact relatively small files (1 to 100MB or so). I have not found any particular threshold, but I have seen the issue impact numerous files in the 500MB neighborhood.
- The problem seems to date at least to the version of Windows 7 that was in release as far back as the Fall of 2010, as I discovered corrupted backup copies of files dating back that far. Again, the files are corrupted with respect to the original copy...NOT with respect to file structure itself.
Any recommendations on Fast Drives that can save large files 8+ gigs in a matter of seconds. I have a USB 3.0 drive, even though it's connected to a 2.0 port, I'd still prefer something more faster, besides I want it to be internal.
View 4 Replies View RelatedIf you extract the icons from imageres.dll or shell32.dll then the maximum icon size is about 64x64 and 32x32 for most icons. I am trying to extract the largest icons, where can I get them.
View 14 Replies View RelatedMy client's computer was infected with a virus obtained via Facebook. I removed this and multiple other infections (and I'm pretty thorough with my scanning). She gets it back, starts working on it, and apparently her devices and printers icons are blank. Not missing, like with a "blank page" icon, just... blank. Here's the kicker: it only happens with large and extra large icons. It also happens with normal folder icons. When I change it to medium or lower, they come back. I've tried rebuilding the icon cache database several times, tried sfc /scannow, tried chkdsk, tried uninstalling any recent updates, etc... There have been no hardware changes, the hard drive has been tested as good (no bad sectors), her dual monitors are at a sane resolution, and I'm confident that the viruses has been removed.
View 6 Replies View RelatedAny simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
<span lang="EN">I have Windows 7 and Internet Explorer 9 on my computer. How can I get a large screen up when I click an icon or website without having to click that little box on the upper right of the screen?
View 3 Replies View Related