update for VGA Graphics for EI-Machine Sorrento,(NOTE Windows 7 Update downloads the wrong update for driver,) have searched for an update 21/06/2006 version 6.1.7600.1635, requires and update in order to give hardware acceleration. It seems no update available unless someone knows different.
View 3 RepliesBuilt a new machine at the weekend.
Specs:
Intel i5 2500k 3.30ghz
8gb ram
Win 7 home premium 64 bit
gfx card
Amd Radeon HD7700
Running the game off an SSD, not that that particularly should cause this problem, I imagine.
Game plays fine mostly, but three times now the game has frozen. On two occasions it froze in spot, sound still going, the screen went black, then redrew and played fine. One occasion it just stuck solid and I had to hard reset.I'm pretty sure all the main drivers are up to date, I sorted that out after the build. I thought maybe there was an issue last time as there were some surprise Windows updates after the crash and restart...but seemingly not."Display driver amdkmdap stopped responding and has successfully recovered." is what it says.
Why does MS update push 32 bit updates to my 64 bit machine?
View 3 Replies View RelatedMy machine has been stuck on installing this update all night. I think my hard drive may be full, what should I do? Been meaning to format that thing and reinstall windows to it since its just a 40 gig SSD.
View 3 Replies View Relatedcan anyone send me the links to update1) intel (R) HD graphics family2)radeon HD 6470M3)bios update for hp pavilion g6 1201tx
View 9 Replies View RelatedI have a dell inspiron 6000 and I got mobile intel 915GM/GMS,910GML express chipset family for my graphics card driver. I want to play the Dimension U game, so I have to update my graphics card driver. But I can't
View 9 Replies View RelatedAfter I reformatted windows 7 I notice that it looked funny and that my graphics card was set to standard and my monitor was set to generic pnp monitor. Ive downloaded the graphic card drivers from amd but they still dont show up.
Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
Dell Inc. Studio XPS 1645 A13
System Service Tag: 2T6BCN1 (support for this PC)
Chassis Serial Number: 2T6BCN1
Enclosure Type: Portable
[code]....
After four or five trial and error attempts of system restores to find why my computer was having such an insanely long boot time I finally discovered that it was an optional windows update titled "Intel Corporation- Display - Intel(R) HD Graphics." I avoided the update and my computer worked amazingly. However, my girlfriend recently used my computer and decided to perform some updates...the Intel HD Graphics update being one of them. So of course now my computer is experiencing the same slow boot time and general sluggishness.
View 2 Replies View RelatedI want to upgrade my GF daughters PC, she has a Dell Optiplex GX260 and I know the Graphis card will not support Aeros so I want to buy a new graphic card for it and it has to work with windows7, can some one tell me a good card to put in to it.
View 9 Replies View RelatedI have a sony vaio z227 laptop . it has a amd radeon hd 6650m graphics. but I can't update my driver from the amd site because the site doesn't have drivers for switchable graphics ! and the sony site doesn't update its drivers ! what should I do?
View 3 Replies View RelatedI purchased motherboard with the manufacturer number of MB.G0409.005 (MB.G0409.005 GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM2) on 2/3/12. I had put it into my system and then proceeded to install upgrades from the Gateway website. I saw there was a BIOS update (file: 924G1P11.ROM) available so I tried to update my BIOS. Well, after updating my BIOS with the .ROM file that I had gotten from their website [URL], but after that, the on board ATI graphics adapter is no longer working. I tried to contact Gateway with no luck and them telling me that they don't recommend updating the BIOS. I also tried to contact the place where I purchased the motherboard from and they said that they didn't have the original .ROM. The motherboard is also not listed on the Foxconn website either. I am running Windows 7 x64 Build 7601 and I have also tried using a Ubuntu 12.04 LTS live USB and that did not work as well. As far as I can tell, the BIOS will not even recognize it. I am now currently using a NVIDIA GeForce GT 220 graphics card that is plugged into the 16x PCI-E slot. I have found modified .ROM files that someone had done for this motherboard, but I don't want to risk it. And every forum and post I've come across has dead links to ones that someone has made a copy of the .ROM file and uploaded from their motherboard.
My system is a Gateway DX4300-15e with 6 gb's of DDR2 RAM (originally 8 gb's of RAM, but a 2 gb stick blew out from a power surge, hence why I had to get a new motherboard) with a AMD Phenom II x4 970 Black Edition Deneb 3.5GHz Socket AM3 processor.
Take a look at this in it there are links to graphics drivers. How to Update Your Graphics Drivers for Maximum Gaming Performance - How-To Geek
View 2 Replies View RelatedI had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? [code]
View 9 Replies View Relatedi have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
I replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies View RelatedI have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
View 9 Replies View RelatedI have a desktop with an ATI Radeon 3200 HD integrated graphics,can that be changed or would i have to change the whole box?
View 9 Replies View Relatedwell i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies View RelatedI connect to a remote machine C from Machine B which is connected from Machine A, How can I send ctrl+alt+end to remote machine C ? I cannot access m/c C from m/c A, I need to go through B to access C.
m/c A --> Remote destktop to m/c B --> remote desktop con m/c C.
Installing W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies View Relatedi bought a new hp g62 laptop with i5 and ati . i dont know what is the problem with the resolution and the size of the screen..
View 6 Replies View RelatedIn my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedHow to switch from onboard graphics to a graphics card
View 2 Replies View Relatedanyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
View 9 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
I am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies View Related