PCI Dosen't Seam To Detect Graphics Card After NETFRAME 4.0 Update
Feb 26, 2012
I had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? [code]
i have this big problem is that my graphics card as a problem that in almost 2 years it never did thisi never had problems with this computerbut what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yeai did manage on getting a screen cap from the windows and it looks like thishe weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same resultim using Windows Ultimate 32 bit i have my graphics card connected to my TV(LCD) with a HDMI cable i thought it could be that so i tried another cable it didnt work so at this point i ran out of ideas
I purchased a HP Pavilion dv9540us Entertainment Notebook PC and upgraded to Windows 7, after I got a virus and let Microsoft Techs into my laptop remotely in an effort to remove the worm and they deleted some key OS Files. So, they were kind enough to give me Windows 7 Professional & install Office 2010, but failed to inform me that upgrading from Vista to Windows 7 would render my Nvidia graphics card useless. So, here I am trying to figure out what to do and where to get the correct Drivers to get my HDMI & Other ports working again. I tried talking to HP, but to them it's a matter of national security & if your not willing to "Grea$e the wheels" they're not willing to give up the "seceret." Although, They did tell me that I will need to download a chipset driver to my HP Pavilion dv9540us that is compatible with Windows 7 and then my Nvidia graphics card will be detectible by my Device manager. Then I would need to update my Nvidia Drivers, Reboot, and I should be up and running. Sounds good, but what is the HP Driver I need? Does anyone have a link or any better input? Because, I am about ready to Smash this thing or hunt down some HP Support guy.
I have a dell inspiron 6000 and I got mobile intel 915GM/GMS,910GML express chipset family for my graphics card driver. I want to play the Dimension U game, so I have to update my graphics card driver. But I can't
After I reformatted windows 7 I notice that it looked funny and that my graphics card was set to standard and my monitor was set to generic pnp monitor. Ive downloaded the graphic card drivers from amd but they still dont show up.
Windows 7 Home Premium (x64) Service Pack 1 (build 7601) Dell Inc. Studio XPS 1645 A13 System Service Tag: 2T6BCN1 (support for this PC) Chassis Serial Number: 2T6BCN1 Enclosure Type: Portable
I want to upgrade my GF daughters PC, she has a Dell Optiplex GX260 and I know the Graphis card will not support Aeros so I want to buy a new graphic card for it and it has to work with windows7, can some one tell me a good card to put in to it.
I purchased motherboard with the manufacturer number of MB.G0409.005 (MB.G0409.005 GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM2) on 2/3/12. I had put it into my system and then proceeded to install upgrades from the Gateway website. I saw there was a BIOS update (file: 924G1P11.ROM) available so I tried to update my BIOS. Well, after updating my BIOS with the .ROM file that I had gotten from their website [URL], but after that, the on board ATI graphics adapter is no longer working. I tried to contact Gateway with no luck and them telling me that they don't recommend updating the BIOS. I also tried to contact the place where I purchased the motherboard from and they said that they didn't have the original .ROM. The motherboard is also not listed on the Foxconn website either. I am running Windows 7 x64 Build 7601 and I have also tried using a Ubuntu 12.04 LTS live USB and that did not work as well. As far as I can tell, the BIOS will not even recognize it. I am now currently using a NVIDIA GeForce GT 220 graphics card that is plugged into the 16x PCI-E slot. I have found modified .ROM files that someone had done for this motherboard, but I don't want to risk it. And every forum and post I've come across has dead links to ones that someone has made a copy of the .ROM file and uploaded from their motherboard.
My system is a Gateway DX4300-15e with 6 gb's of DDR2 RAM (originally 8 gb's of RAM, but a 2 gb stick blew out from a power surge, hence why I had to get a new motherboard) with a AMD Phenom II x4 970 Black Edition Deneb 3.5GHz Socket AM3 processor.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
So, I upgraded from 32-bit Vista to Windows 7 RC. All went well, except for my computer now only detects (under Display Adapters) a Standard VGA Adapter. I have a Dell XPS M1530 notebook, and it came with a nVidia GeForce card, I believe it was a GeForce 8600M GT. I right-clicked and told it to check for hardware changes, but it will not detect the graphics card.
Because of this, it is not displaying any of the Aero effects, etc, and my second monitor is not receiving any signal although it is properly connected.
I'm new here because I've been searching everywhere and I can't find an answerRecently, I bought and downloaded The Sims 3 Supernatural, because I'm a huge fan and have all the games. Well, after I played the first time, and shut it off, my screen resolution went really big, so I adjusted that, then I noticed that my computer has been very laggy, and it recently told me it doesn't support 'Aero effects' So, I assumed it was the game, and uninstalled it. Then I re installed it, and now it is telling me that it doesn't have a graphics card to support it. I am not very intelligent when it comes to computers, and I have no idea what to do
I can't get my computer to recognize my Micro SD adapter, which I have tried on other computer and worked properly, so I suppose the real trouble is my laptop. When I insert it, nothing happens at all, and just once I've pulled it out, a message pops saying it can't recognize the device (and this only happens sometimes). I have a Toshiba Satellite T135-SP2909R and my OS is Win 7 (not upgraded from Vista, it's always had it), I have already downloaded the driver from the Toshiba webpage and from other sites, but it won't work either. When I run it, it says Realtek Card Reader 6.1.7100.30101 (perhaps it's the wrong one?). Also, someone told me it could be the bios, but I really don't know what that means.
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
I have a Maxtor One Touch 4+ 500GB External Hard Drive. I have been running Windows XP with it for years with no problems.I recently upgraded to Windows 7 and the Windows 7 won't even recognise my Maxtor External HD.
trying to factory reset my computer and ever since i upgraded to win7 f11 system recovery won't load up for me i tried CTRL + f11 still no luck i tried other keys also it just loads me up normally and the recovery disc doesn't have factory reset option me i wanna reset my whole computer before i get my new cpu ram een over a year i keep trying for days every couple months to get it to reset but no luck so i finally
My brother laptop is Dell 5110N and it have 2nd graphic card. (Onboard Intel HD 3000, and Nvidia GF-GT525)I installed new windows and download lasted update for both graphic card. first install for Intel HD 3000 and then Nvidia GF-525 But now problem is for second graphic nvidia gf525. in device manager it's ok and installed! but when System Rating detect Intel HD. why?Also i open cpuz programs in menu graphic just see Intel HD and don't see Nvidia GF-525
update for VGA Graphics for EI-Machine Sorrento,(NOTE Windows 7 Update downloads the wrong update for driver,) have searched for an update 21/06/2006 version 6.1.7600.1635, requires and update in order to give hardware acceleration. It seems no update available unless someone knows different.
After four or five trial and error attempts of system restores to find why my computer was having such an insanely long boot time I finally discovered that it was an optional windows update titled "Intel Corporation- Display - Intel(R) HD Graphics." I avoided the update and my computer worked amazingly. However, my girlfriend recently used my computer and decided to perform some updates...the Intel HD Graphics update being one of them. So of course now my computer is experiencing the same slow boot time and general sluggishness.
I was stupid and accidentally uninstalled my AMD Catalyst Program in an attempt to update the drivers. Now I cant switch to the card from the integrated Intel card. I can't restore the computer or re-install the program. When I try to re-install it, its doesn't work but there are no errors.
the xfx 1gb 4850 i had been eying is finally off the shelves the only place i find it is at frys and it costs 150+ s&h. do you guys have any other graphics cards you would recommend within the 100-150 usd category with at least 512 mb of memory.
