I have a Maxtor One Touch 4+ 500GB External Hard Drive. I have been running Windows XP with it for years with no problems.I recently upgraded to Windows 7 and the Windows 7 won't even recognise my Maxtor External HD.
View 2 Replies
Acer pc dosen't boot, I do not have original cd and my windows ic crashed, I have cd with windows 7 and pc dosen't boot.
View 3 Replies View Relatedtrying to factory reset my computer and ever since i upgraded to win7 f11 system recovery won't load up for me i tried CTRL + f11 still no luck i tried other keys also it just loads me up normally and the recovery disc doesn't have factory reset option me i wanna reset my whole computer before i get my new cpu ram een over a year i keep trying for days every couple months to get it to reset but no luck so i finally
View 21 Replies View RelatedI had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? [code]
View 9 Replies View RelatedI have a maxtor One Touch 111mini back-up device that contains all my xp files. I'm converting to windows 7 but cannot load the maxtor programmes onto windows 7.
View 3 Replies View RelatedMy maxtor one touch III mini is 50% fragmented and I cannot defrag it. What do I do next to recover the fragmented files?
View 5 Replies View RelatedI recently got a new hard drive that is now windows 7, before I had windows XP. I only just transferred the usb cable and now every time i tried to back up or save a file to the Maxtor one touch 4 plus, it gave a warning window that said it couldn't perform the function because the disk was damaged or corrupted. I have also checked the drive for any errors by scanning it for any problems but nothing has come up. I just now uninstalled the driver in case I could reinstall it but that is not working because its not recognizing that it was uninstalled. Please help me find another software for this. I also looked online for the software and the Seagate company offers this software for free however, it is only compatible with the Mac OS X systems and not for any windows systems.
View 3 Replies View RelatedMy maxtor one touch III will not work with windows 7, it worked in vista until I upgraded to 7.
View 3 Replies View RelatedI just got a Dell server from a friend and want to install Windows 2008 Server on it.The thing is when I start installing it, when I have to decide the location I don't see any hard drive.I guess it's a problem of sata drviers, but I don't find any on the web... I forgot to mention that there is a Raid controller (I don't know if this can make any difference...)
View 3 Replies View RelatedWill the Maxtor OneTouch work with Windows 7. I can't get my Dell Laptop to get files. It shows under devices and working properly, but nothing happens. I can't open device or files.
View 2 Replies View RelatedCan't see files on a Maxor IDE drive, wont boot from it and if I make it a slave or cable select it still just sees it in device manager. Computer management wont see it and when I shut it off I get a message that I must 1st format the drive.
View 4 Replies View RelatedI used to have one! It seems to have disappeared, and I run diagnostics, and shows that the driver is messed up. I uninstall old driver, replug the external Maxtor HD back in, it shows that it installed a new driver, and I have to reboot. I do that, and still no HD. This is what I get, any help would be awesome, I have tons of shows I taped on the drive!
View 4 Replies View RelatedNEED WIN 7 DRIVER FOR MAXTOR III USB ?
Answer:-
No additional drivers should be needed to run any usb drive in W7.
Plug it in and W7 should detect it and autostart will pop up menu options.
Answer 2:-
Hope you are running 64 bit Windows 7!
Try this driver!
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=fa-go-desk-xtreme-sw&vgnextoid=a8d3b5b59b7d5110VgnVCM100000f5ee0a0aRCRD
Check the compatibility of your drive in windows 7!
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=211931&NewLang=en
Can anybody point me in the right direction as to where I can find a Maxtor Drive Diagnostic tool as I seem to be getting a lot of errors on my drive, Have tried Google but got lost in the thousands of links.
View 4 Replies View RelatedMy Maxtor One Touch 2 USB drive worked fine with XP and Vista 32 bit but Windows 7 does not see it in My Computer. I can'r find a new driver on the Maxtor site even though MS says to go there. Any ideas?
View 7 Replies View RelatedMy problem is that it My Maxtor ext 500g Drive worked fine with Vista but as soon as I Upgraded to Win 7 it doesn't. It is recognized and I can even open it but after about 10secs I get an error that "Win Explorer has stopped working, looking for a solution" the solution never comes and everything closes to a blank desktop.
View 2 Replies View RelatedI have windows 7 , and i have creative zen, and maxtor basics desktop 500gb. But the problem is. my computer doesnt recognize any of this hardware: i dont know what is going on? what can i do? Ive got dell studio 1537.
View 1 Replies View Relatedmy maxtor onetouch external drive is not being recognized by my computer
View 2 Replies View Relatedmy maxtor onetouch external drive is not being recognized by my computer?
View 1 Replies View RelatedMy notebook is not detecting the Maxtor Basic portable storage external hard disk drive when connected.
View 1 Replies View RelatedMaxtor external 500G hard drive causes BSOD on my Windows 7 install.
View 2 Replies View Relatedhow do you delete old backups from maxtor external hard drive
View 1 Replies View RelatedIs there a free download of driver for my maxtor personal storage 3200?
View 1 Replies View RelatedI have a Dell Vostro 3450 and want to connect to a Maxtor external hard drive with a 1394 firewire connection. What kind of adapter should I be looking for?
View 1 Replies View Relatedi want to ask. My windows cannot recognize my CD-R files. i put in my CD-R and windows recognize it as blank CD-R. while there's file (an autorun files and software installer) in that CD-R. i have pc and laptop, i try putting my cd-r on my pc (win xp sp2) my windows recognize the file, but when i try putting on my laptop (win 7 64bit) it recognized as blank cd-r.
View 1 Replies View RelatedI was gfiven some external hardrives with enclosures and was told they all work. I cant get a single one to be recognized in computer. any tips or workarounds to get windows to recognize these drives. I am now using an acer 64 bit laptop.
View 1 Replies View RelatedMy Windows 7 does not recognize my Overclock CPU-Z says all is oki but at windows it shows 3.07ghz/3.07ghz even it should show 4.02ghz/3.07ghz.
View 3 Replies View RelatedRunning Biostar TA79GX 128Mb, 8GB ram...in 4 sets of 2DIMM Running 32 bit... windows 7... only recognizes the 3.5 GB...
Do I have to change to 64 bit system for it to id the 8GB ram?
system won't currently handle my Pinnacle Ultimate Studio program with out physical memory dump (blue screen)
I have a TDK Trans-it 4GB pen. One of my machines recognizes it just fine, but the other does not evenn recognize it (no dialog, search for new hardware does not return)
View 6 Replies View RelatedOn my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up but then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader connected via USB and the same negative results. this was tried with 3 different sim cards.
View 2 Replies View RelatedI have a laptop (Asus K55D) with two OS, Windows 8 and 7, operating through a KVM switch (trendnet tk-409). It is also connected to a Linux machine. Linux machine works fine. When booting the laptop, the Bios and the boot selection work fine too, and so does Windows 8 when booted. But when booted into Windows 7, while the display works, the keyobard and mouse do not.
View 2 Replies View Related
