Will the Maxtor OneTouch work with Windows 7. I can't get my Dell Laptop to get files. It shows under devices and working properly, but nothing happens. I can't open device or files.
View 2 RepliesI recently backed up my files from my last computer which was running windows xp onto an external hard drive using the files and settings transfer wizard. The files were compressed onto my hard drive as .dat files. Now, when I attempt to restore the files onto my new computer running windows 7, the files are not recognized under.
My last computer is crashed and out of commision. I do not know which service pack it was running. how I can recover my old files?
I had excell excell 2003.I now have windows 7.some of my excell files are shown as rev file and I can't open them
View 2 Replies View RelatedI have 2 PC's linked directly in a LAN.
PC1 is running Windows 7 Home Premium - 64bit
PC2 is running Windows XP Home Edition - Service Pack 3
Both computers have the same Workgroup PC2 has 2x Hard drives, one of which I have set up as a "Shared" hard drive.PC1 I have changed in 'Advanced sharing settings' - network discovery/public folder sharing/file and printer sharing turned on. Also �File sharing connections� is on �Enable file sharing for devices�..� And I have turned off password protected sharing.
I used the Windows 7 Easy Transfer for the first time and much to my surprise it worked without a problem.I previously asked questions of file transfer but after the answers I received I thought there might be a easier way to do this.My situation was migrating files from a laptop HP dv7-1247 x64 to a Netbook Acer 722-BZ197 x64 which both use Windows 7 HP SP1.Inititing the file transfer they utilize the terms from " old computer to new computer on this procedure. There is no mention of Windows 7 and only XP and Vista. Windows 7 was placed on the market 22 months ago but is not included on the instruction.As I proceded with this operation there a three methods available, migrating cable, flash card and network. Since I do not possess the cable nor flash card I selected the network After I intitiated the transfer from my " OLD HP with Windows 7 " it proved me with a code number to be used with the " NEW Acer with Windows 7.Proceeding to tha ACER it asked me for this code which I placed in the box. A new screen appeared but much to my surpise it asked if this transfer is from XP, Vista or Windows 7. I selected the Windows 7 and the complete transfer of my files was accomplished in less then 29 Min.
View 1 Replies View RelatedI use a HP dv7-1247 x64 and just bought a Acer Netbook 722-BZ197 x64 and both use W7 SP1 Home Premium. I would like to transfer all my files from the HP to the Acer so what is the best possible method to acccomplish this type of operation. I travel quite a bit and I would like to use the netbook instead of the larger laptop.
View 1 Replies View RelatedI took my old desktop HD out and hooked it upto my new Windows 7. teen when I try to even open my 2003 Word Reeume doc it says "Word can not open the document; user does not have access priviliges" It's my resume and all i want to do is copy it to my new comp.
View 4 Replies View RelatedI just a Bluetooth adapter, my 1st PC that has Bluetooth, and i was just wondering how do you send files from my phone to the PCThe only way i can get it to work is if i right click on the Bluetooth logo at the bottom and click receive file. In my opinion it takes forever to send more than 1 file by doing that all the time. Is there another way... If i don't click revive file my phone can not find the PC.
View 5 Replies View RelatedI have 3 computers 2 with windows 7 and 1 with xp. Now I need to share files. There is no problem with windows 7. I can access both the computers having xp and windows 7 and can transfer and share files. But one with xp. I can't see the other 2 computers with windows 7...
View 4 Replies View RelatedIf I close the folders during a file transfer, leaving only the transfer details window open, the file transfer ends prematurely.
View 6 Replies View RelatedLinksys E3200 Router
3 - Windows 7 Machines (Enterprise & Ultimate) , Tried wire and wireless
1 - Windows 8 64-bit machine
2 New Macbooks (Air and Pro)
1 Mac Mini server (2011 model) - 3TB external HD formatted in OS Journal (default mac) with samba sharing enabled
The macbook's we have connect and transfer large amounts of files just fine to the mac mini. No issues at all, even on wireless. The issue is when trying to transfer files from the Windows machines to the mac mini. You select just one 150mb file to copy over, and it might fail at 30mb or 120mb transferring giving an error like file or path is not available. However you can hit retry a few times and it might continue or restart, sometimes you have to cancel and copy the file over again. It acts like it loses the path, but you can instantly navigate to the server again instantly like there was never an issue. If you select a bunch files to transfer, lets just say like 2000 files, and its a total of 4gb. You will have to hope the retry works when the error happens or click skip and redo the file after. Nothing stands out that is causing this, but it is either an issue with the Mac & Samba transfer, router setting, or a Windows setting / registry issue causing it.I tried to search google, but most things that come up are how to setup sharing from mac to windows. Can't exactly find anyone else talking about this, except I did find 1 thread on Mac Rumors forums talking about it but it just had 2 people say they have the same issue, and 1 person said he had no issues.
I did not know where to put this so moderatoers if you need to move it please do. I am trying to transver files from my pc to a Viewsonic G tablet but my FTP software wants to open it and it keeps getting errors about establishing a connection. The problem is I do not want the FTP to open it, I want it to open normally with windows explorer. I have just gotten it back (the tablet) after a warranty repair but before I sent it in I had been experimenting with Filezilla and it must have become the default program for opening the Viewsonic. How do I set it back to Windows Explorer being the default program?
View 2 Replies View RelatedMy company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
Is it possible to connect xp mode to my Windows 7 network for easy file transfer? I've been trying but had no luck.
View 3 Replies View RelatedI have a problem with my IBuypower desktop. I have only had it for 3 months, and recently I've had this problem when trying to open certain programs. This is the message that pops up. "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher." This happens every time I try to run Command Prompt. This also happened to me when ever I opened up Guild Wars 2 when I had the free trial a few weekends ago. And recently (yesterday) World of Warcraft has been freezing on me. It all of a sudden happened out of nowhere, and after re-installing it, it still does it.. I've been running AVG and Total Defense Security Center, and both say there is nothing harmful on my computer. When I start up my computer, the computer checks the disks and says there is a file or program that was recently downloaded that needs to be removed, but I do not know what it is. I can't seem to find a solution to this anywhere online. Do I need to re-install Windows? I also just got blue screen.
View 1 Replies View RelatedCan someone tell me why I can't transfer a PDF file or E-Mail it and open it up? I recieved a PDF File by E-Mail and downloaded it just fine, but when I tried to put it in a folder it won't open. I also sent it to a friend by E-Mail, and the same thing.
View 4 Replies View RelatedOk I'm totally new to networks & everything so bear with me.
My computer is the main machine.
I have Win 7 64 & the other computer, which is my buddies is XP Pro 32.
I currently have an N wireless Netgear router that both computers are hooked up via ethernet & my machine also has the N wireless dongle from Netgear, but they dont have drivers for 64 yet.
Now I want to send a couple of files to my other computer which is my buddies. I want him to also be able to send me files, but he tends to surf the net a little less carelessly than I would and I want to make sure when hes sending or receiving info from my particular computer that I dont get a virus or anything.
So how do I set up a network between a Win 7 64 computer & an XP Pro 32 computer, making sure to extra safeguard my main machine?
What is the easiest way I can transfer files over ethernet from my desktop to my laptop? Do I have to setup a HomeGroup to do this?
View 6 Replies View RelatedMy power went out when I was moving a file to my other hard drive. Now I have one half of the file in the original directory and the other half that was transferred to the hard drive. How do I resume this/combine them back together?
View 1 Replies View RelatedI have scheduling system software on my xp computer for my salon. I transferred the software/file to my new windows 7 computer. I can't open it! I have tried Tornado transfer, flash drive transfer and external hard drive. (It will open on an old computer), but not windows 7.
View 7 Replies View RelatedI have a usb card reader plugged in with a 4GB card. The transfer rate starts in the MBps and then dramatically slows down to KBps. I included both screenshots below.
View 4 Replies View RelatedI have a LAPLINK v1.1 pc to pc usb cable, irunning windows 7 64bit but cannot find a driver compatible
View 2 Replies View Relatedproblem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.
I know for sure that problem occured after i fresh installed to windows 7 from xp pro. I have also tried to uninstall the usb root hub but still give me the same driver as it was.
I have a desktop PC running Win 7 Ultimate 64 with a secured wifi home network. I also have a Droid 2 smartphone on the network. I have been pulling my hair out trying to figure out a way to do file transfers between my droid (mainly music and photos) and pc.
When I try and view my PC files using any app on the droid I will see all the "public folders" but when I try and view any of the default music, documents, pictures libraries I get a user permission failure (username and password authentication needed). The twisted part is I have no username and password set up on my Win 7 PC . When it boots up there is no user name or password required. My wife and I are the only users so we have no "accounts set up". The Admin is the default account and there is no password.
Our daughter has a PC running Win Xp and I can view all shared files on that PC via the droid. Driving me nuts.
I assume the other option would be to somehow "include" all my music, pictures, videos, etc, from my default library in the "public" libraries.
I don't need to block the Skype, i only need to block the file transfer, so I don't know How make this
View 4 Replies View Relatedi have bought a notebook with vista 32 bit home basic and didnt like vista so i upgraded it to windows 7 64bit after 1 day usage. Generally i found new os fine but i have a problem with file copying from my desktop (running xp sp3). My transfer speed is only 1.5 mbyte per second. Notebook has atheros 5007eg (54mbit) wireless lan and desktop has realtek gigabit lan. And my router is airties rt-205 with 125mbit wireless signal. I have done the following things but it's still same.
*netsh int tcp set global autotuninglevel=disable.
*Turn off Remote Differential Compression.
*Disabled Remote Assistance.
*Unchecked ipv6.
My Question is, is it possible to increase the File Transfer Speed on my Computer??
View 9 Replies View RelatedI have a problem coping files between two Windows 7 machines on a network.
I have a Dell Studio 1749 Laptop that came with Windows 7. It is connected to a wireless network. I have a Dell Inspron XPS 410 Desktop with a newly clean installation of Windows 7 connected to the wireless router via cable. I need to copy files from the Laptop Drive E to the Desktop Drive E.
From the Desktop I get message, You need permission to perform this action
In contrast, from the Desktop, I can copy from the Laptop to the Desktop. I have full permission and administration control.
I bought a new computer and I want to only transfer my picture file from it. I dont care if I have to scan my entire old computer but I only want to transfer the picture file using the Belkin easy transfer cable. Can I transfer just the picture file using the Belkin easy transfer cable?
View 2 Replies View RelatedWHY bluetooth file transfer on PC does not work
View 1 Replies View RelatedI have a maxtor One Touch 111mini back-up device that contains all my xp files. I'm converting to windows 7 but cannot load the maxtor programmes onto windows 7.
View 3 Replies View Related