i have bought a notebook with vista 32 bit home basic and didnt like vista so i upgraded it to windows 7 64bit after 1 day usage. Generally i found new os fine but i have a problem with file copying from my desktop (running xp sp3). My transfer speed is only 1.5 mbyte per second. Notebook has atheros 5007eg (54mbit) wireless lan and desktop has realtek gigabit lan. And my router is airties rt-205 with 125mbit wireless signal. I have done the following things but it's still same.
*netsh int tcp set global autotuninglevel=disable.
*Turn off Remote Differential Compression.
*Disabled Remote Assistance.
*Unchecked ipv6.
I have a Dell XPS 15Z with gigabit ethernet port, have dgs 1005d gigabit switch and WDTV live hub also with gigabit "capability"... The network cables should be fine...
The issue is that the file transfer (these are usually HD movies) from my laptop to WDTV are rather slow having in mind it's a gigabit network connection... The speed tops 15 MB/s. Same thing if I connect WDTV directly with my laptop.
The switch indicates (green light) it has set-up a gigabit connection both with WDTV and my laptop.
I have disabled autotuning, RDC, AV software etc. Tried with jumbo frames, disabling flow control - EVERYTHING
issue: file transfer from/to xp from my laptop very slow while PC is turned off. as soon as i turn pc on all gets good. this looks really weird to me, all of these 3 are connected with cable not wireless, i also have tried changing the port of the laptop cable on the router but didnt change anything.
I'm trying to transfer between my Desktop computer (XP) and laptop (Windows 7). When I do it wifi it only transfers at speeds between 1MBs to 3MBs. When I physically connect to my router I get better speeds at 10-11Mbs. However in both cases on large files it loses connection.It says that connection lost/failed and gives me option of retry/skip. When I hit retry it still doesn't work. When I disconnect and retry that method it starts up again from scratch however rarely does it fully transfer a file. These files are anywhere from 2GIGs to 4GIGS.I don't have anti-security on either computer. I'm using new Netgear router.
Here is my problem. In this case, I am trying to transfer pictures from one of my XP systems to my Windows 7 Home Premium system over my wired network. Between the XP systems, things run fairly quick. But not with 7 involved. When I go to transfer the 47 pictures that I want, it tells me that it will take 18 minutes. And this is for only 66.7MB of data. Tell me this can get better. Being new to 7, I have no idea where to look for the problem. I tried searching Microsoft's site and the help files on my system. I just can't find a solution.
Here is some more info, and maybe some you don't need. On the Windows 7 system, I can access all the shared folders on my other systems (all XP SP3). If I go to the network map, my other systems are marked as "The following discovered devices can not be placed in the map.". I don't know if that is a problem or not. The reason I did that is because I was reading through the Microsoft site on file sharing and that was mentioned. It also mentions a program called LLTD, which may be needed on 32-bit XP systems. I tried installing that on my XP system, but it said I didn't need it.
As far as the file transfer, while sitting at my XP system, access is denied when I try to access the shared folder (for my pictures) on Windows 7. Now if I transfer them to the Users/Public/Pictures folder, it will transfer them in just over 5 minutes. Still a little slow, in my opinion, and not where I want them. Why can I transfer there and not into the folder I want them? And why is quicker to transfer while sitting at my XP system?
I have made sure that all the systems have the same workgroup name. I have also tried disconnecting the power from my modem, router, and all systems then powering each one up one at a time. That was suggested to me before. It didn't change anything.
One last thing. While starting my Windows 7 system, as soon as it was at the desktop, I tried to transfer the pictures again and the transfer took off. Almost immediately, it said that there was 20 seconds left. It was flying like I thought it should. Less then a minute into the transfer, it hit a wall and changed to about 20 minutes. Go figure. I checked my settings for the folders I want to transfer to and they are set as shared. Maybe at that point, a security program started up. I don't know. I do have a trial version of Norton's Internet Security installed. It came preloaded with the system. I was thinking of removing that and going with Avast free. I have checked any firewalls and did disable them. No difference.
I tried to list everything I've tried. Hopefully, some helpful info in there. I find it strange that I can access the shared folders but not transfer from them. Any thoughts on what to do? Is there a setting in Windows 7 that needs to be changed?
Using Easy Transfer from a Windows 7 desktop to a Windows 7 laptop [over a network] a 17.5 GB data partition transfer took over 5hrs. It all went smoothly but ... is this a reasonable time ?
Ok I'm totally new to networks & everything so bear with me.
My computer is the main machine.
I have Win 7 64 & the other computer, which is my buddies is XP Pro 32.
I currently have an N wireless Netgear router that both computers are hooked up via ethernet & my machine also has the N wireless dongle from Netgear, but they dont have drivers for 64 yet.
Now I want to send a couple of files to my other computer which is my buddies. I want him to also be able to send me files, but he tends to surf the net a little less carelessly than I would and I want to make sure when hes sending or receiving info from my particular computer that I dont get a virus or anything.
So how do I set up a network between a Win 7 64 computer & an XP Pro 32 computer, making sure to extra safeguard my main machine?
I have a problem coping files between two Windows 7 machines on a network.
I have a Dell Studio 1749 Laptop that came with Windows 7. It is connected to a wireless network. I have a Dell Inspron XPS 410 Desktop with a newly clean installation of Windows 7 connected to the wireless router via cable. I need to copy files from the Laptop Drive E to the Desktop Drive E.
From the Desktop I get message, You need permission to perform this action
In contrast, from the Desktop, I can copy from the Laptop to the Desktop. I have full permission and administration control.
I have a wired network - ethernet cable from pc upstairs down to modem at television. Cable from modem to WD TV live. So all networked and wd tv is showing up correctly as a network drive.If I transfer a 350mb video file from my pc to the hard drive attached to the WD TV live, over the wired network, it takes just over one minute i.e. just over 5 megabytes a second transfer. Not great but adequate.If however I connect my Nokia N8 to the same pc and copy the file from the N8 rather than the PC (even though the N8 is connected to the pc!) the file goes to the WD TV in 28 seconds - over 12 megs a second.How can a file get transferred quicker over the network from a phone connected to the pc than from the pc itself to the same destination?
ps - the phone is displayed under "portable devices" rather than "hard disk drives" and the properties suggest it is using a protocol called MTP - media transfer protocol. I've also added another external usb drive to test the transfer and received the same results as the built in hard drive. So it does appear to be something to do with "hard drives" versus "portable devices" as recognized and dealt with by Windows.
I've tried doing file transfer before, from my win7 desktop to xp laptop, and my desktop would freeze every time, making me force-reboot. Back then, I just thought it was just a laptop problem,but I just tried this with my new second desktop with win7, and it still happens!the old desktop that freezes's specifications are as follows.Q6600, HD5770, 4G ram, 1TB HDD, Win 7 64bit?
I have 3 computers 2 with windows 7 and 1 with xp. Now I need to share files. There is no problem with windows 7. I can access both the computers having xp and windows 7 and can transfer and share files. But one with xp. I can't see the other 2 computers with windows 7...
Just installed Windows 7 64 Home Pro from XP two days ago. The last remaining issue I need to solve is a drag and drop file transfer to my other home network computer (HNC).o far I've been able to d&d files from the HNC via Acronis WD in it's explorer mode without any issues, some sized in the multi Gb range. I'When I try to d&d a large file, specifically my NVIDIA drivers sized at 123Mb the Windows 7 computer freezes immediately. The cursor is stuck and the computer is absolutely locked, the only thing that works to recover it is the power off button.When I come back I don't get any indication of anything going wrong and if I look on the HNC drive the file has been transferred successfully
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
I'm connected to my work network using a PPTP VPN connection. The browsing of files on the remote server is extremely slow in Windows 7. I have another computer that has Windows XP on it, and there it's fast as always.Local network file browsing works fine.
I have an Acer Netbook and just plugged an external hard drive in via USB. I have 2.18G to transfer and it is telling me to wait another 2 hours and 15 minutes.It has Intel Atom N570(1.66GHz) and win7 Starter.
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
I'm running Windows 7 Ultimate x64 on my Computer(...) and I have recently found a problem that's pretty annoying: The file copying is really-really slower than on Windows XP and I mean that if I want to copy a folder which is about 650MBs over to a USB Flash Drive it takes about 1 day(what??) and the transfer rate is like 300KB/s. I have tried to look for solutions on the Internet but they haven't turned out handy. Could someone please help me asap as I need to give the USB to someone in a couple of hours?
I am hoping someone might be able to shed some light on this problem. When transferring a 3 gig file from my NV+ to my internal hard drive I get speeds of around 300 Kb/s and message saying the transfer will take 18 hours.When i transfer the same file to my wifes computer over the same network the speed jumps to 30MB/s which is what it should be. I cannot understand why this is happening as my wife's computer is way slower than mine with only a core 2 duo processor and 2 gig of ram
i have been having this problem for about three weeks now and my transfer rate is very slow.... and at the end it even takes longer... sometimes it even gets stuck at somepoints but resumes after quite a while
I have a Vantec NexStar TX NST-210S2-BK Hard Drive Enclosure - 2.5" SATA to USB 2.0 wit a 120 GB Segate Harddrive in it connected to an Asus K61-IC laptop and my transfer speeds on all my USB Ports are acting super slow.Also, Just recently I've had a balloon tip start popping up in the taskbar telling me that if I hook my USB Devices up to a USB 2.0 Port it will run faster. I'm pretty sure that all my USB Port's are 2.0.
I have 2 desktop computers and one laptop on a network, all three are also part of a Homegroup. When I try to copy files from the main Admin PC to the laptop it slows down to less than 15KB/s. I thought perhaps it was the wifi reception but even when connected with Ethernet it's still terribly slow to the point that a 300MB folder takes 2 hours (estimated time). I end up cancelling the transfer sand sometimes windows explorer ends up crashing. However when I copy files from the second desktop to laptop it is normal speed. No lag, no glitch. All the files I tried to copy where share, available to Everyone. Everything else works fine, streaming video and music from the main admin PC is flawless, I just can't seem too transfer files from the main Admin PC to the laptop.
I recently completed a clean install of windows 7.
I have the i7 950 on the ASUS Rampage II Extreme motherboard.
I am currently experiencing extremely slow usb tranfer speeds.
I get transfer rates on average of 650 KB/second.
I checked the device manager and 2 of the 8 usb controllers say enhanced. The other 6 do not. According to the specs of the board, all 8 should be usb 2.0.
I have tried letting the system update the drivers, but for all, it retains the current driver. I even went so far as to disable the controllers and restart. All 8 returned, but with the current drivers.
I tried using the install CD that came with the mobo, but it states that it cannot run using the current OS.
i just notice that my usb transfer is really slow around 11mb/sec for my usb stick and around 20mb/sec for my external hard drive. I noticed this change right after installing SP1. (I'm on windows 7 ultimate 64bit.) The thing is that it happenned in a particular moment, i was transfering files to my external hard drive the same day i installed Sp1 and in the beginning of the transfer the transfer speed was normal, around 60mb/sec. Then my Internet security software (Eset Smart Security) tells me that a process has changed in i think it was taskhost.exe (i am not 100% sure but i know it was a windows process), it ask me do i accept it, i press ok accept the change and then i saw my transfer speed slowed down right away to something like 20mb/sec.
As of recently (for the last couple of weeks) I noticed that the transfer rate to my external WD Elements SE 1TB drive is very very slow (~2MB/sec). This wasn't always the case, and the drive was much more responsive than that.
I searched about this topic extensively and the only thing I found was an issue with installing Windows 7 SP1 that in some cases screwed up the USB2 drivers. This was supposedly addressed by KB2529073 which is installed on my system. However, I'm still experiencing this ulta slow transfer rate.
I know there are very similar threads but like I said I cannot find a solution. [code] I recently noticed the transfer rate really slow, at an average about 1.5MB/s.I have tried enabling Better Performance option but what happens is that it starts really fast and then goes down to about 1.5MB/s anyways and usually just freezes or stops.I also have a laptop, its an Acer Aspire AS5745DG-6681. Specifications are:Intel Core i5-480M, 15.6" HD (1366x768) LED-backlit, 4GB RAM, 500GB HDD, Blu-ray Combo Drive, NVIDIA GeForce GT 425M 1GB, Wireless N, HDMI, Webcam, 9-cell, Windows 7 Home Premium 64-bit.I updated the RAM to 8GB on the laptop.Using the same external hard drive, I can get rates at an average of 30MB/s and better performance is also disabled on the laptop.I Don't know what the difference is they both have Windows 7 64 bit, just the laptop is Home Premium and my desktop is Windows 7 Enterprise.
I bought a hp dv5-2230us 3 days ago with a i3 380 4 gb ram and win 7 home premium . I tried to copy a 1GB file onto an sd card and it took over an hour! it was going at about 200kb a sec or so. On my old satellite A105 with 1 GB ram and T2050 1.6 GHZ it took about a min to transfer the same file on the same card running ubuntu. It was not a linux specific file. Only thing that has been installed is firefox, flash, java, and microsoft updates.
I have recently had to format my hard drive and re-install windows. I have also had to replace the motherboard, CPU and power supply. I borrowed a 1.5 TB Freecom firewire external hard drive from a friend to back-up important data before the format, but the transfer speed is uselessly slow now that I am attempting to put the data back on the drive.
I have tried:
- updating the drivers for the firewire card
- switching to 1394 OHCI Compliant Host Controller (legacy) in the device manager
- Optimizing the drive for 'better performance' as opposed to 'speedy removal' in the drive's properties.
As things stand at the moment, I am getting about 400 kb/ps transfer speed from the external to my on-board drive. As you can imagine, this is virtually useless to me, considering I have hundreds of gigabytes worth of data to transfer.
