Transfer Of A Video File Over A Wired Network?
Aug 3, 2012
I have a wired network - ethernet cable from pc upstairs down to modem at television. Cable from modem to WD TV live. So all networked and wd tv is showing up correctly as a network drive.If I transfer a 350mb video file from my pc to the hard drive attached to the WD TV live, over the wired network, it takes just over one minute i.e. just over 5 megabytes a second transfer. Not great but adequate.If however I connect my Nokia N8 to the same pc and copy the file from the N8 rather than the PC (even though the N8 is connected to the pc!) the file goes to the WD TV in 28 seconds - over 12 megs a second.How can a file get transferred quicker over the network from a phone connected to the pc than from the pc itself to the same destination?
ps - the phone is displayed under "portable devices" rather than "hard disk drives" and the properties suggest it is using a protocol called MTP - media transfer protocol. I've also added another external usb drive to test the transfer and received the same results as the built in hard drive. So it does appear to be something to do with "hard drives" versus "portable devices" as recognized and dealt with by Windows.
View 4 Replies
ADVERTISEMENT
Oct 28, 2009
Ok I'm totally new to networks & everything so bear with me.
My computer is the main machine.
I have Win 7 64 & the other computer, which is my buddies is XP Pro 32.
I currently have an N wireless Netgear router that both computers are hooked up via ethernet & my machine also has the N wireless dongle from Netgear, but they dont have drivers for 64 yet.
Now I want to send a couple of files to my other computer which is my buddies. I want him to also be able to send me files, but he tends to surf the net a little less carelessly than I would and I want to make sure when hes sending or receiving info from my particular computer that I dont get a virus or anything.
So how do I set up a network between a Win 7 64 computer & an XP Pro 32 computer, making sure to extra safeguard my main machine?
View 9 Replies
View Related
May 7, 2009
What is the easiest way I can transfer files over ethernet from my desktop to my laptop? Do I have to setup a HomeGroup to do this?
View 6 Replies
View Related
Sep 22, 2009
i have bought a notebook with vista 32 bit home basic and didnt like vista so i upgraded it to windows 7 64bit after 1 day usage. Generally i found new os fine but i have a problem with file copying from my desktop (running xp sp3). My transfer speed is only 1.5 mbyte per second. Notebook has atheros 5007eg (54mbit) wireless lan and desktop has realtek gigabit lan. And my router is airties rt-205 with 125mbit wireless signal. I have done the following things but it's still same.
*netsh int tcp set global autotuninglevel=disable.
*Turn off Remote Differential Compression.
*Disabled Remote Assistance.
*Unchecked ipv6.
View 9 Replies
View Related
Mar 7, 2011
I have a problem coping files between two Windows 7 machines on a network.
I have a Dell Studio 1749 Laptop that came with Windows 7. It is connected to a wireless network. I have a Dell Inspron XPS 410 Desktop with a newly clean installation of Windows 7 connected to the wireless router via cable. I need to copy files from the Laptop Drive E to the Desktop Drive E.
From the Desktop I get message, You need permission to perform this action
In contrast, from the Desktop, I can copy from the Laptop to the Desktop. I have full permission and administration control.
View 1 Replies
View Related
Oct 26, 2011
I have a Dell XPS 15Z with gigabit ethernet port, have dgs 1005d gigabit switch and WDTV live hub also with gigabit "capability"... The network cables should be fine...
The issue is that the file transfer (these are usually HD movies) from my laptop to WDTV are rather slow having in mind it's a gigabit network connection... The speed tops 15 MB/s. Same thing if I connect WDTV directly with my laptop.
The switch indicates (green light) it has set-up a gigabit connection both with WDTV and my laptop.
I have disabled autotuning, RDC, AV software etc. Tried with jumbo frames, disabling flow control - EVERYTHING
View 4 Replies
View Related
Jan 17, 2012
my network setup is:
-TP-Link wirelesAP/Router with DD-Wrt installed
-Computer A - File server win xp sp3
-Computer B - My laptop win 7 x64 sp1
-Computer C - Wife's pc win 7 x64 sp1
issue: file transfer from/to xp from my laptop very slow while PC is turned off. as soon as i turn pc on all gets good. this looks really weird to me, all of these 3 are connected with cable not wireless, i also have tried changing the port of the laptop cable on the router but didnt change anything.
View 4 Replies
View Related
Feb 18, 2012
I've tried doing file transfer before, from my win7 desktop to xp laptop, and my desktop would freeze every time, making me force-reboot. Back then, I just thought it was just a laptop problem,but I just tried this with my new second desktop with win7, and it still happens!the old desktop that freezes's specifications are as follows.Q6600, HD5770, 4G ram, 1TB HDD, Win 7 64bit?
View 1 Replies
View Related
Nov 18, 2011
I have 3 computers 2 with windows 7 and 1 with xp. Now I need to share files. There is no problem with windows 7. I can access both the computers having xp and windows 7 and can transfer and share files. But one with xp. I can't see the other 2 computers with windows 7...
View 4 Replies
View Related
Oct 29, 2009
Just installed Windows 7 64 Home Pro from XP two days ago. The last remaining issue I need to solve is a drag and drop file transfer to my other home network computer (HNC).o far I've been able to d&d files from the HNC via Acronis WD in it's explorer mode without any issues, some sized in the multi Gb range. I'When I try to d&d a large file, specifically my NVIDIA drivers sized at 123Mb the Windows 7 computer freezes immediately. The cursor is stuck and the computer is absolutely locked, the only thing that works to recover it is the power off button.When I come back I don't get any indication of anything going wrong and if I look on the HNC drive the file has been transferred successfully
View 3 Replies
View Related
Mar 24, 2011
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
View 9 Replies
View Related
Aug 27, 2012
Is it possible to connect xp mode to my Windows 7 network for easy file transfer? I've been trying but had no luck.
View 3 Replies
View Related
Mar 17, 2012
how to transfer games from laptop to ps3 via wired or wireless? and also tell me how can i transfer the primary set up files for ps3 because i followed some tuts. but the won't work. i put primary data into my pendrive and connected with ps3 but i was unable to see anything in usb drive also no data to update. so tell me the easy and neat way to do this work done. and also mention the way by which i can connect my usb pendrive with ps3 to transfer primary setup files.
View 4 Replies
View Related
Dec 29, 2009
I've been searching around for a fix to my issues but I cant seem to find one so Ill try just taking a stab in the dark and seeing if anyone will reply.
Now..
I am using my on-board RTL8168C NIC to connect to a Netgear DG834Gv2 using a cat5 cable. My network connection state varies from full access to none at all. Sometimes I turn the computer on and it works fine, other times I have to disable then enable the NIC 5-10 times and eventually it works.....then doesn't work.
It also appears that when all the planets align,and for some reason or another I can actually get on the network...that the NIC gets "overloaded" with information then just disconnects me. Say for example, I can go around facebook and google, that sort of thing fine (when said connection is working) but say if I want to load up something like World of Warcraft it appears to break my connection.
I have tried using Gigabytes drivers on their webpage specific to my mobo, I have gone to Realteks website and used their latest drivers and I have also just used the bog standard windows 7 drivers, it appears when I do uninstall the device and then reinstall it with one of the drivers the device appears to work but then after 5-10 minutes maybe, the device fails me again.
I've been reading around and I have disabled the Bonjour service and set up the network as "Work" network.
This issue seems to come and go too. It appears to hang around from a day or 2, somehow repair itself and be fine for another 2-3 weeks and break again. Actually since Sunday I have been having this problem, Saturday I was pretty much downloading all day at my max 150kbps (Go go Australia's amazingly fast internet ) no problems at all.
We have 2 other computers on the network, 2 laptops, One using 7, the other using Vista, They do not have any issues at all.
Anyway, here are 2 IPConfig's One where my network connection is fine, The other where it is broken.
View 5 Replies
View Related
Apr 27, 2009
Alright, so I just did a fresh install of Windows 7 build 7086 x64. Everything works just find, except my network adapters. I'll detail system specs after I explain the problem.
When i connect one of my cables, the computer attempts to identify the network. It doesnt. I check IPconfig, and it gets all DHCP information from my Linksys router, but no internet connection. I have IPv6 turned off on both adapters, as well as the VMnet adapters i use for VMware Workstation.
I attempt to ping google.com and it comes back, ping request could not find host
I attempt to ping the router, and says host unreachable.
(IPconfig data - Local Area Connection 2) (Local Area Connection 1 shows up the same with IPv4 Address 192.168.1.102)
Connection-specific DNS Suffix : oxfordnetworks.net
IPv4 Address : 192.168.1.103
Subnet Mask: 255.255.255.0
Default Gateway : 192.168.1.1
The Gateway itself sees the Win 7 computer, but when i ping from the router to 192.168.1.103, it times out.
Also, I attempted to update the network drivers using the Intel Pro v14 Vista x64 drivers, and the installer wouldnt let me install the drivers because of "software not built for your operating system".
View 3 Replies
View Related
Aug 10, 2011
The output of the "print route" command on my Win7x64 system is shown below.The wireless adapter has been assigned to 198.168.2.72 by the router and the Gigabit wired connection has been manually assigned the static address 198.168.2.8The strange thing is that the gateway metric which I believe is used to decide which connection to use is 25 for the wireless connection (i.e. fast) and 276 (i.e. slow) for the gigabit wired connection. But I expected this to be the other way around. Why does it think the wireless onnection is faster? Does this mean that network traffic is generally routed thru the wireless adapter? Is there a way for me to tell which adapter is being used to route traffic?Should I believe its reported speed, or should I force the metrics so that the wired connection is used by default. If so, what commands are used to force this priority, and do these commands need to be repeated after every boot, or are the permanent?
[code]...
View 4 Replies
View Related
Feb 2, 2011
Im using a Vodafone dongle so no router. I have connected the two via ethernet cable and the connection is there but "no network access" is below the Unidentified network. tried a couple of different things but no luck.
View 1 Replies
View Related
Mar 24, 2011
The title suggests i need to setup my networks so that they are both working harmoniously together.The reason i need this is because on the wireless side i need to connect to my router for internet access.On the wired side i need to connect to my NAS. I have tried connecting the NAS box to the router and it works but it is too slow.
View 5 Replies
View Related
Sep 7, 2009
It takes between 45-60 seconds from the time the desktop is shown, untill the network identification is done. This is both after normal reboot, or resume from standby. After that, everything works fine. For me, that is just a long time to wait, and i wonder if someone else have the same problem? I tried disabling ipv6 and the option to power down the card when in sleep mode.
My network card is in my system specs, and i use the only driver for Windows 7 64bit for this card.
View 7 Replies
View Related
Jan 17, 2010
I recently bought myself a new Netgear Stora MS2110 (network storage), my network situation is a bit strange. I've got my computer connected to a wireless network with internet access, and the Stora now connected to the computer by a wired LAN without internet. I just now discovered that I needed to have internet to setup the Stora, so my question is this - Can I somehow Bridge the wireless network onto the wired network through my computer? giving the Stora internet access and access to the wireless network.
View 5 Replies
View Related
Oct 31, 2012
I've been having this problem for weeks now and haven't had any luck fixing it. I'm having an unidentified network issue on my desktop, which is running Windows 7. I know it SHOULD be working because I've tried plugging the cable into my laptop and disabling wi-fi, and that works fine.I'm currently on my university's network, and this only started when I first moved in this semester. My ethernet was working fine when I was at home over the summer, and when I was at school last semester. I'm able to obtain an IP address, and I'm able to ping 127.0.0.1 and my IP address successfully from the command line. Based on reading tons of other posts, I've also tried.resetting TCP/IP. dnsflush disabling IPv6 uninstalling Bonjour reinstalling drivers for my onboard network card (mobo: ASUS P7P55D-E LX, Realtek PCIe GBE Family Controller)resetting the CMOSbuying a new Intel NIC http://www.newegg.com/Product/Product.aspx?Item=N82E16833106033) changing the "Link Speed & Duplex" setting for both cards (tried 1.0 Gbps full duplex, 100Mbps full and half duplex) changing network settings to automatically configure unidentified networks as private networks instead of publicrunning virus/malware checks I'm really at my wit's end for what else to try here. I thought buying a new NIC would do the trick and it was a last resort for me, but even that hasn't worked.
View 13 Replies
View Related
Jan 9, 2012
I currenly work in an IT department and have given this 'project'.
We have a number of users who have been given 32bit Windows 7 laptops for remote, home and office working.
I have been asked to create a batch file so that as soon as the user comes into the office they plug the laptop into the network and it should use the wired connection automatically to access the corporate LAN. As soon as they work away and need to access the corporate network remotly they do not need to press the wireless button on the laptop, when the laptop is switched and logged on i want the laptop to know that it is not on a wired network and for the wireless to kick in.
I have created two bat files -
netsh interface set interface �Wireless Network Connection� Disable
and
netsh interface set interface �Wireless Network Connection� Enable
these have been placed in task scheduler under create a basic task. I have tried both of these in cmd prompt but they still don't work.
View 3 Replies
View Related
Aug 19, 2012
I have two PCs cabled directly to a Netgear WNDR4500 router. This morning, my Windows 7 PC had no network connection when I turned it on. These computers don't get moved, I wasn't messing with the cables beforehand. Everything was fine yesterday.The Troubleshooter suggested I had a broken cable. I tried another cable, but it still would not work. I connected the Windows 7 machine to the same router connection my XP machine uses, but it still did not work.Device Manager reports the Network Adapter is working properly. The system tray network icon reports "Not connected/No connections are available." The Troubleshooter reports, "A network cable is not properly plugged in or may be broken." I tried disabling/enabling the Local Area Connection, but it still reports "Network cable unplugged." My gut feeling is that the Ethernet jack on the motherboard is physically broken. But it blows my mind that it would break for no reason.Could an automatic update of some sort disabled networking in a way that it only appears the cable is bad? Could the physical connection at the back of the machine spontaneously break? I suppose I could go buy a network card, which would be cheaper than replacing the motherboard. I'm gonna get cleaned up and head to the store now.
View 7 Replies
View Related
Mar 22, 2011
I have a simple home network running several machines with Windows 7.
My "server" is running Windows 7 Pro x32. This machine is connected via wired internet directly to my wireless router. When I run a java speed-test web app, I am seeing speeds between 1 and 4 Mb/sec. (My connection is ~20Mb).
I have a Windows 7 Pro x32 laptop connected via wireless. This laptop gets 17Mb/sec speeds.
When I connect the laptop via a wire to the router, it's still upwards of 15Mb/sec.
This was not always the case with this hardware. I have tried shutting down any non-essential services. I have tried running the speed test in Safe Mode +Networking. I ran a live linux CD and got fast speeds.
View 9 Replies
View Related
Aug 11, 2011
Me again, so I know why the Windows 7 HP PC in my last thread won't connect to a wired network here at work, however I've just tried to connect this PC (which is running Windows 7 Professional 32 bit, 2.6Ghz Quad core, 4GB RAM (it's an Acer Veriton X275)) and I get the same stuff. It sees an unidentifed local area connection but it tells me there is no internet access and no network access. Not only is this annoying, but having just got the company to spend over �450 on copies of Windows 7 Pro for 4 other PCs (as well as memory upgrades for 2) it's more than a little worrying!
why this Windows 7 PRO PC won't connect to a wired network? Server PC is running Windows Server 2000, coming through a Netgear switch.
View 2 Replies
View Related
May 5, 2012
I have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
View 6 Replies
View Related
May 17, 2012
I have windows XP mode installed on Window 7 Enterprise and running Windows XP ofcorce. I need to connect my laptop to wired network and in some time to connect wireless for XP mode using. What I mean : I want to use wired internet for my Windows 7 and in same time wireless network for windows XP in XP mode that is running. This I need because those two windows need to be connected in different networks.
View 1 Replies
View Related
Nov 5, 2009
I work at a company in the UK which is attempting to start rolling out Windows 7 to all computers (early adopters and all that, it's just a lot easier than the current mishmash of OSes we have!). One of the 4 users migrated so far is having an odd issue with her wired network (her network controller is a "Broadcom Netlink Gigabit Ethernet"). She's the only person not from the IT dept or the MD of the company to be moved across, so we set her up as a non-administrator to avoid problematic software etc etc.
Suddenly, 3 days ago, whenever she switched on her computer, the connection would claim "Limited or No Connectivity" (even though she appeared to be connected to the Domain), and there was no Internet access. Having played around with numerous things (driver updates, both from Broadcom and HP - the laptop manufacturer, being the main one), I found the only way to get it working again was to disable and re-enable the network controller. The problem with this is that it required a UAC authorization (even though I'd set UAC to never notify), and that requires a domain administrator password (which is a pain in the wotsit).
Anyway, I figured, reluctantly, that if I set her account up as a local administrator, that at least it shouldn't require a password to reset the device. Rebooted the PC, and suddenly the wired network started working from boot without the need to reset the controller.
My question is - has anyone else had any issues with non-administrators being forced to reset their network controllers to get internet connectivity, and is there a known fix?
View 2 Replies
View Related
Oct 17, 2012
How to change the IP address of wired network printer?
View 2 Replies
View Related
Jan 28, 2012
I recently replaced my wireless router and Bellsouth DSL modem with a single Netgear DGN2200 DSL modem/wireless router. The problem is my desktop which is wired, cannot see the laptop computers that are on the network via wireless connection. If I start a homegroup with one of the laptops, the other laptop can join but my desktop cannot (no "join now" option). If I start a homegroup with my wired desktop, neither laptop sees it.However, if I connect my desktop to the network using my USB wireless adapter, then I can establish a homegroup with either a laptop or the desktop with no problem.I have checked that IPv6 is enabled and that all the services listed in other posts are enabled. I'm fairly certain the cause is some setting in my router security, but I don't see anything that would prevent my desktop from linking. I can also get on the internet with no problem.
View 1 Replies
View Related
Jun 16, 2010
The wireless is one I share with my roommates and is fast. The wired NIC connects to a router which has slower internet. The reason I connect to the wired router is so my PC can talk to a linux machine, which I use for some data downloading/analysis.I want to disable internet from the wired connection but keep the ability to talk to other machines on the wired network. I just changed the IPv4 settings and deleted the DNS server information. Is this the best way to do so? I want the wireless to provide internet.
View 7 Replies
View Related
