On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up but then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader connected via USB and the same negative results. this was tried with 3 different sim cards.
My windons 7 doesn't recognize my sim card on my reader. It says it needs wondows XP to run, so can you please help me update it on download software to get it workng properly.
Recently installed the Win 7 x64 RC and it does not recognize my wifi card (Abit Airpace Wi-Fi Wireless Network Adapter), as in it does not show up in the device manager. It does work in vista x32, and also worked in vista x64 when I had it. I've installed the motherboard drivers to see if that would effect anything, but not change. I tried installing the software that comes with the wifi card, and it does not find the card either (no updated drivers are available on the manufacturers website either). I've searched other forums, and it seems others may have had similar problems, but they were able to get windows to recognize their card after shutting down, switching off the PSU, waiting a few minutes and rebooting. This has not worked for me. Another note, in an earlier beta of win 7 x64, the card was recognized and the drivers installed, but it would blue screen each time it connected to the internet or I tried to open a browser.
On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up and then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader and the same negative results. this was tried with 3 different sim cards.
just build a new computer, its running windows 7 x64 business.. and whenever i use my sd card reader it wont work unless i change the drive letter.. OR I've booted the computer with the SD card already in the reader .I've tried multiple readers all known to be working, and multiple cards.what happens is when i place the card in the reader (without changing the drive letter) drive shows activity, and the drive will become visible, but never show the card, instead it registers it as a RAW card needing format..If I go and change the drive letter and insert the card, it then works, once.. if i take it out and put it back in, no luck goes back to recognizing it as a RAW card.
I have windows 7 Premium and I have been using my onboard sound (realtek) which came with my Motherboard (ROG Maximus IV). I then purchased the Asus HDAV 1.3 Deluxe soundcard and installed in my PCI-E slot. The soundcard was not recognised by my pc at all. When I tried to install my driver, it stated that the card wasn't plugged in. I tried every PCI-E slot and eventually took it out and returned it. The shop I bought it from did prove that the card worked fine. I then purchased the Auzentech X-Fi Home Theater card. Installed that in my PCI-E slot and again it is not recognised. When I try to install the drivers it just tells me that the card isn't installed. Windows has assigned generic driver but states it is not plugged in. I have since given up (But kept the card) and have gone back to using onboard.
I have been looking for a Windows 7 driver for a NVIDIA Geforce Go 6800for an Alienware Area-51 M7700 laptop. Every driver that I download from NVIDIA's website gives me the error message during the installation that it cannot find a driver compatible with my hardware. Windows 7 has installed a generic "standard VGA adapter" which does not allow for aero functionality
I had a custom PC built for me recently by a friend. Everything was installed except the sound card. I bought a creative recon 3d fatality sound card and looked up how to do it and its pretty straight forward.. However, no matter which PCI slot i plug it into upon computer start up my computer dosnt even recognize that there is an audio output device. I tried downloading the new drivers tons of times, rebooting, uninstalling the reinstalling.. Nothing seems to work and nobody really knows why. Also tried to F2 on start up to try and switch my motherboards audio out from a default setting but it really dosnt even give me that option.
I Have an Nvidia geforce gt 220 graphics card and it works on all my games but one. The graphics card wont show up in Microsoft Midtown Madness for some unknown reason? This game was fine and worked perfectly before i upgraded my PC From XP to Windows 7. This is Strange because this game works on my dads laptop (Windows 7) and recognizes the graphics card perfect, so its not windows 7, but its not the graphics card because it worked on XP.
I have had a dual monitor setup with my laptop(Inspiron 1545 with GM45 Intel Card) extending to a regular LCD screen. It worked for two months and until recently has stopped working.I have uninstalled, reinstalled, uninstalled, reinstalled the newest drivers, changed the cables(power supply and VGA), system restored back a month to when it was working, and changed the power outlet.This originally worked flawlessly and now the laptop is not recognizing any device I attach via the VGA output. I have plugged the laptop into another monitor with no avail as well. I find it hard to believe that this would stop working one day with no notice or any problems. I have also tried attaching a projector that had worked for over a year with the laptop and have gotten nothing.
I receive a black screen as if to say this something being outputted, but nothing is displayed. Both windows screen resolution and the intel GUI both do not recognize another device. [code]
the problem being is the motherboard will not recognize the graphics card with the latest drives and older ones to test, the strange thing is if i take a stick of memory out it boots up in single memory mode and recognises the card straight away, likewise if i install another module to make it 6gb it fires up perfectly and plays CODMW3 no problem but if i am doing office work after about 30minutes the screen starts to flicker and black lines appear through writing then finally the BSOD comes up complaining about one of the graphics card drivers, dont get me wrong i have played COD for ages and not had a problem, i am at a bit of a loss i want 6gb memory ideally but the system becomes unstable, the system works great as an office computer with 4gb of memory but wont play videos or do video editing because it doesnt recognize the card.
I just built a new computer with a Gigabyte Z68A-D3H-B3 motherboard but ir wont recognize my Asus GTX560 Video Card.I have checked all the bios settings and have installed all the drivers.
i've never tried to hook up dual monitors before so its probably something simple. i installed a new graphics card a while back and haven't used the original for months, and now that im trying to hook up dual monitors it wont even recognize the original in the device manager, or that i have a monitor plugged into it. both monitors work perfectly fine in the newer card slot.
My computer won't recognise my camera (Sony Cybershot 8.1) or the SanDisk card adaptor when I connect these to it. Last time I needed to download photos it opened the relevant program automatically.How can I gain access to either of these---I no longer have the installation CD for my camera or for the card adaptor.
i want to ask. My windows cannot recognize my CD-R files. i put in my CD-R and windows recognize it as blank CD-R. while there's file (an autorun files and software installer) in that CD-R. i have pc and laptop, i try putting my cd-r on my pc (win xp sp2) my windows recognize the file, but when i try putting on my laptop (win 7 64bit) it recognized as blank cd-r.
I was gfiven some external hardrives with enclosures and was told they all work. I cant get a single one to be recognized in computer. any tips or workarounds to get windows to recognize these drives. I am now using an acer 64 bit laptop.
I have a TDK Trans-it 4GB pen. One of my machines recognizes it just fine, but the other does not evenn recognize it (no dialog, search for new hardware does not return)
I have a laptop (Asus K55D) with two OS, Windows 8 and 7, operating through a KVM switch (trendnet tk-409). It is also connected to a Linux machine. Linux machine works fine. When booting the laptop, the Bios and the boot selection work fine too, and so does Windows 8 when booted. But when booted into Windows 7, while the display works, the keyobard and mouse do not.
I did a quick search on this site on "Administrator not reconized" and found the only threads mentioning this problem have both been closed. My problem is that in trying to download the entire HP driver/software disc for my hp printer psc 1350 series, I was not able to download the entire software, because I did not have Administrator's rights, etc, even though I was the only Administrator (and sole user of this computer at that time). I did some research online and followed one suggestion that I followed, which was to change the setting by going to Start, typing 'cmd' in search field, and typing in 'net user administrator /active:yes.' This created another "Administrator" user, which I am now finding quite useless, since many of my programs have already been downloaded on my first "Administrator" status. I need to know how to remove the last one I created (Administrator), if possible. As it stands right now, the one I had before is the only one with the option to delete. (Ugh!) In any case, even having the second Administrator user status, will not allow me to download the above mentioned software completely. So, I went full circle with the same problem, with no solution.
1) Remove the second Administrator user, and 2) how to get Windows 7 to allow me to download the above mentioned. BTW, I have already tried right-clicking the disc drive (setup file) and clicked "Run as Administrator" - all to no avail. Nothing seems to work.
For some reason Windows 7 Home Premium has decided not to recognize my CD/DVDW drive?t was fine yesterday but today not. The driver is up to date per the fix it tool.Anyone know what I should try next? I have a basic understanding of the computer, but am not expert by a long shot
I've just got a brand new EasyCAP capture card and my computer won't recognise it. In device manager it appears as SM-USV 007 in "Other Devices", and none of the tutorials i've been looking at say that. They all recognise EasyCAP as a capture card. My other problem is that my laptop won't read the installation disc for some reason. I don't know if it's the solution to my problem or it just contains drivers and the screen capture program. I have downloaded the Windows 7 x64 drivers and installed them but it fails to find them for the device.
I get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard Intel Core i5-2500 Processor 4x 1GB DDR3 Radeon 4870 Graphics Card 530 watt Power Supply Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. ) Maxtor 500GB 7200 RPM SATA HDD
I wondering if anyone could help me, when I'm playing a game on the pc I would like the sound to come from the speakers but use the front jack to plug in my headset and talk to friends on skype.My problem is the sound from my game comes through my headset as well and it's very annoying! Also if someone else is on the pc and i'm on a skype call I have to ask them to mute the sound on the pc. I have Realtek Hd Audio Manager installed and it recognizes the headset when I plug it in but in control panel under sound it doesn't,it thinks my headset is speakers.I've searched and searched for a solution, apparently older versions of Realtek had better options for controlling jacks,the one I have even though it's all updated is very basic with no options to change any settings to do with jacks.
