Windows 7 Installation Does Not Recognize The HDD
Mar 12, 2012
I get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard
Intel Core i5-2500 Processor
4x 1GB DDR3
Radeon 4870 Graphics Card
530 watt Power Supply
Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. )
Maxtor 500GB 7200 RPM SATA HDD
No Disc Drive Atm Installing from Flash Drive
View 3 Replies
ADVERTISEMENT
Sep 8, 2010
I have recently built my own desktop pc and installed windows 7 ultimate 32 bit with no problems at all. I now am trying to upgrade to 64 bit but windows will not recognize any of my drives to install windows files to.
View 1 Replies
View Related
Jan 15, 2013
I'm trying to do a clean install of windows 7 (by booting the computer into the CD) but no drives show up. This usually happens to me so no big deal. The problem is.. recently I got a "new" computer, made out of old parts of other computers. SO i have no drivers CD.. So i have no SATA drivers...I tried to download about 30 so far with no luck. Simply because I have no idea what I should download.I simply don't know if sata drivers come from the HDD i have, from the motherboard, from the chip of the motherboard.. i have no clue.Here's my computer info you may need:I've seen posts saying to in the bios change from whatever I have to IDE or to something else, but I have no clue what that does so i would rather avoid it if possible. If there's no other solution, what does it actually do if i change from SATA to something else? (if its even SATA what I have).
View 9 Replies
View Related
Jan 4, 2012
Windows 7 doesn't recognize my WD HDD during installation?trouble shooting:This is what i did..... I took a laptop hdd and placed it into my desktop. I booted my desktop with the laptop hdd. I then placed the WD HDD ( the one that i've been having trouble with) as a second hard drive. I noticed that windows recognized the WD HDD and could write to it. I also reformatted the WD HDD. I then tried to run the windows installation from my laptop hdd so i could install it on my WD HDD and once again it didn't recognize it. I thought maybe i could clone my laptop HDD to my WD HDD with Acronis "clone software" and it couldn't recognize the WD HDD as well. This is frustrating...... Why can i write to the WD HDD but cant install the OS.
View 2 Replies
View Related
Oct 30, 2012
I've had windows 7 64bit installed on my PC and I converted one drive to bitlocker drive, it was working fine
and today after windows went crashing I've freshly installed windows7 64 bit enterprise but I cannot find my bitlocker drive it appears on the disk management as unallocated!
View 9 Replies
View Related
Oct 1, 2010
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
View 9 Replies
View Related
Nov 28, 2012
I have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H
Intel core i5 2500k
WD Caviar Black 1TB SATA 3 7200 rpm
Btw the HDD appears in the Bios.
View 10 Replies
View Related
Jun 21, 2012
We'll I've found others with similar issues, but none exactly like this. Have the HDD and SDD setup on RAID0 due to using IRST. 64Gb of the SDD is allocated as RAID0. When W7 prompts me to select the drive for W7 installation the only disk that appears is the 64Gb unallocated SDD sector.I've loaded the IRST 64bit drivers from the ASUS Mobo disk too. It recognizes the file I direct it to, but once loaded it still only recognizes the 64Gb unallocated SDD.
View 2 Replies
View Related
Nov 4, 2009
does it recognize it as general how much ram, or does it go specific. sorry if its a confusing question..but i have a gig ram on this laptop and i have some used for video ram..so total is a little under 1 gig, how will windows 7 recognize this, as "your pc has 1 gig ram" or "your pc has 9** ram".
View 8 Replies
View Related
Jul 14, 2010
I've tried installing a couple times now and I keep on getting an error saying that I'm missing a driver for the DVD drive.
Thing is, I'm installing Win 7 using the DVD drive.
So I've looked for a driver for my drive (Lite-On LH-20A1S) and all I get from the Lite-On site is Firmware. I've also tried the USB/DVD Download Tool to make a bootable USB stick but that program says my .iso isn't valid.
View 3 Replies
View Related
Mar 4, 2010
i have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.
View 8 Replies
View Related
Jun 22, 2012
I am trying to install windows 7 64 with a new M3A79-T. It keeps freezing at expanding files with error 0x80300001. I figure this might be due to missing sata drivers but when i click load drivers during the installationwindows doesn't recognize anything. I tried with the mobo support dvd and i tried burning drivers from the mobo website and using that dvd. In either case i can browse to the dvd but all the foldersin it are empty, so nothing to install even though the driver are definitely there. when i click on scan
View 7 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
View 2 Replies
View Related
Jun 5, 2012
i want to ask. My windows cannot recognize my CD-R files. i put in my CD-R and windows recognize it as blank CD-R. while there's file (an autorun files and software installer) in that CD-R. i have pc and laptop, i try putting my cd-r on my pc (win xp sp2) my windows recognize the file, but when i try putting on my laptop (win 7 64bit) it recognized as blank cd-r.
View 1 Replies
View Related
Aug 12, 2011
I was gfiven some external hardrives with enclosures and was told they all work. I cant get a single one to be recognized in computer. any tips or workarounds to get windows to recognize these drives. I am now using an acer 64 bit laptop.
View 1 Replies
View Related
Apr 11, 2011
My Windows 7 does not recognize my Overclock CPU-Z says all is oki but at windows it shows 3.07ghz/3.07ghz even it should show 4.02ghz/3.07ghz.
View 3 Replies
View Related
Dec 30, 2010
Running Biostar TA79GX 128Mb, 8GB ram...in 4 sets of 2DIMM Running 32 bit... windows 7... only recognizes the 3.5 GB...
Do I have to change to 64 bit system for it to id the 8GB ram?
system won't currently handle my Pinnacle Ultimate Studio program with out physical memory dump (blue screen)
View 13 Replies
View Related
May 30, 2011
I have a TDK Trans-it 4GB pen. One of my machines recognizes it just fine, but the other does not evenn recognize it (no dialog, search for new hardware does not return)
View 6 Replies
View Related
Apr 27, 2012
On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up but then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader connected via USB and the same negative results. this was tried with 3 different sim cards.
View 2 Replies
View Related
Oct 31, 2012
I have a laptop (Asus K55D) with two OS, Windows 8 and 7, operating through a KVM switch (trendnet tk-409). It is also connected to a Linux machine. Linux machine works fine. When booting the laptop, the Bios and the boot selection work fine too, and so does Windows 8 when booted. But when booted into Windows 7, while the display works, the keyobard and mouse do not.
View 2 Replies
View Related
Jan 24, 2011
I did a quick search on this site on "Administrator not reconized" and found the only threads mentioning this problem have both been closed. My problem is that in trying to download the entire HP driver/software disc for my hp printer psc 1350 series, I was not able to download the entire software, because I did not have Administrator's rights, etc, even though I was the only Administrator (and sole user of this computer at that time). I did some research online and followed one suggestion that I followed, which was to change the setting by going to Start, typing 'cmd' in search field, and typing in 'net user administrator /active:yes.' This created another "Administrator" user, which I am now finding quite useless, since many of my programs have already been downloaded on my first "Administrator" status. I need to know how to remove the last one I created (Administrator), if possible. As it stands right now, the one I had before is the only one with the option to delete. (Ugh!) In any case, even having the second Administrator user status, will not allow me to download the above mentioned software completely. So, I went full circle with the same problem, with no solution.
1) Remove the second Administrator user, and 2) how to get Windows 7 to allow me to download the above mentioned. BTW, I have already tried right-clicking the disc drive (setup file) and clicked "Run as Administrator" - all to no avail. Nothing seems to work.
View 7 Replies
View Related
Mar 13, 2011
For some reason Windows 7 Home Premium has decided not to recognize my CD/DVDW drive?t was fine yesterday but today not. The driver is up to date per the fix it tool.Anyone know what I should try next? I have a basic understanding of the computer, but am not expert by a long shot
View 6 Replies
View Related
Apr 5, 2012
I've just got a brand new EasyCAP capture card and my computer won't recognise it. In device manager it appears as SM-USV 007 in "Other Devices", and none of the tutorials i've been looking at say that. They all recognise EasyCAP as a capture card. My other problem is that my laptop won't read the installation disc for some reason. I don't know if it's the solution to my problem or it just contains drivers and the screen capture program. I have downloaded the Windows 7 x64 drivers and installed them but it fails to find them for the device.
View 1 Replies
View Related
May 28, 2012
I wondering if anyone could help me, when I'm playing a game on the pc I would like the sound to come from the speakers but use the front jack to plug in my headset and talk to friends on skype.My problem is the sound from my game comes through my headset as well and it's very annoying! Also if someone else is on the pc and i'm on a skype call I have to ask them to mute the sound on the pc.
I have Realtek Hd Audio Manager installed and it recognizes the headset when I plug it in but in control panel under sound it doesn't,it thinks my headset is speakers.I've searched and searched for a solution, apparently older versions of Realtek had better options for controlling jacks,the one I have even though it's all updated is very basic with no options to change any settings to do with jacks.
View 2 Replies
View Related
Mar 16, 2011
How do I get my Windows 7 to read both RAM 1 gig each. total of 2 it only recognizing 1 gig?
View 2 Replies
View Related
Jul 29, 2011
I am running windows 7 ultimate and it only reconizes 3.4 of my 12 gig of ram. My Asus board sees all 12 gig?
View 1 Replies
View Related
Aug 10, 2011
will win7 64 recognize 2 2tb hd in raid 0 4tb
View 4 Replies
View Related
Aug 25, 2011
I disassembled my computer, carried it in my luggage and reassembled it. The only thing changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment...nothing. Not even any yellow exclamation marks in device driver. I have tried to force installation, tried installing a legacy device, everything I can think of. how I can force Win7 to search for and find my DVD-RW's?
View 8 Replies
View Related
Aug 25, 2011
I disassembled my computer and then reassembled it. The only thing I changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment, nothing. Not even any yellow exclamation marks in device driver. Both DVD-RW's are on an IDE cable, while my HD's are all SATA. I have tried to force installation, tried installing a legacy device, everything I can think of. How I can force Win7 to search for and find my DVD-RW's?
View 1 Replies
View Related