I disassembled my computer and then reassembled it. The only thing I changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment, nothing. Not even any yellow exclamation marks in device driver. Both DVD-RW's are on an IDE cable, while my HD's are all SATA. I have tried to force installation, tried installing a legacy device, everything I can think of. How I can force Win7 to search for and find my DVD-RW's?
I disassembled my computer, carried it in my luggage and reassembled it. The only thing changed is the case. Since reassembling it, Windows (7 ultimate 64-bit) will not recognize either of my 2 DVD-RW's. At boot, my bios offers them as boot options, and with the Win7 disk in the one, it will boot from it if selected. However, once within the Win7 environment...nothing. Not even any yellow exclamation marks in device driver. I have tried to force installation, tried installing a legacy device, everything I can think of. how I can force Win7 to search for and find my DVD-RW's?
After I forced shut down my netbook by hitting the power button, I get the message force shut or cancel whenever I shut down. Is there anything I can do to turn the message screen off? I had to power off when my netbook hanged. Since then the force shutdown or cancel message always blink when i shut down
An excellent printer/fax/scanner in my office cannot work from Win7, according to itself.No updated Win7 driver seems to be available for my HP Color LaserJet 2840.I've seen it work before, but do not know how to do it.How can I force Win7 to use an XP driver (in the machine that's connected to the printer) over the network?
When I shut down my PC (Compaq Presario CQ5600y/AMD Athlon) running Windows 7, I get a quick message that says something like program running force shut down? (although nothing is running that I know of). It only started doing this this week. Once I click on the "force shut down" button, my PC shuts off fine, but I would like to know what the "force shut down" is all about.
I actually don't have a problem with drivers, but in how windows detects hardware and finds appropiate drivers. Because sometimes I have many computers at a time to fix, I wondered if there was a way in which windows 7 can be forced to update every installed driver in the system at once, this because when windows 7 is installed, it installs outdated (but working) drivers for some devices. Generally, I don't install drivers by double clicking them, but rather by extracting them (exe's) and then making windows find them, I do this because doing so, prevents most of the time, the installation of unwanted applications.Now, I know I can update each driver individually using the device manager, but this could take very long depending on the machine. I would like windows (on a clean installation), to uninstall ALL of the drivers, including chipset, video, audio, etc, and then look for them in a specific folder, say C:ew_drivers (where all new extracted drivers are).
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
I want to set system policy to force password change. It is my understanding that Windows 7 group policy editor is not availible with Windows 7 basic or Home Perimum. This being the case does this mean that there is no way to change policy these to versions or just that the policy editor itself is not available.
I have album artwork displayed for every album/directory in my music directory (D:Music) by using a folder.ico and a desktop.ini file.This method was used as a work-around to fix the deficiency in Windows Vista and 7 to no longer display front-facing album covers using the folder.jpg file.This work-around looks fantastic and actually looks better than XP because it's borderless.It also has the advantage of staying loaded into memory, which I have plenty of, until I restart the computer, unlike the use of folder.jpg, which has to be reloaded every time the directory is opened and scrolled.However, when I first open my music folder, it has to load all the artwork and I have to manually scroll through the entire directory until all of the folder.ico files are read.I have a very large library and this takes some time. I can set D:Music to open at startup, and it will read the folder.ico files for the visible albums/directories, but then I still have to manually scroll after that.Is there any way to force Windows to load the folder.ico files for every folder in my D:Music directory at startup, with no intervention from me? When I go to open or scroll through the music directory, all of my album artwork has already been pre-loaded into memory and thus it is a seamless flow of album artwork with no waiting.
Multiple users with read/write authority on a mapped server drive allways leave problems as misplaced files or folders.Is there a way to force windows to allways ask for confirmation on mouse operations!
The situation: Using windows explorer to access a shared network resource, for example, \blahfolderfolder2 - the first time I try this on a new installation, it requires authentication (user/pass) which I provide (this is on a workgroup, not a domain).That's fine. The goal: I want a way to force Windows 7 Pro to forget the authentication and ask for a new authentication next time an access is attempted for that share. Here's what I have tried, and what has not worked: Windows Explorer -> Tools -> Disconnect Network Drive (it doesn't work because there is no mapped network drive to disconnect; next connection attempt does not ask for authentication) From command prompt (run As administrator): rundll32.exe keymgr.dll, KRShowKeyMgr -- Then select any network share to clear credentials for, then click delete button. (no network shares listed; next connection attempt does not ask for authentication)
From command prompt (run As administrator): net use * /delete /yes ( nothing happens; next connection attempt does not ask for authentication) From command prompt (run As administrator): control userpasswords2
Go to advanced tab, click on manage passwords. This brings up the credential manager (can also get to credential manager directly from control panel). Find credentials to delete (windows, certificate-based, or generic) - there are currently none listed, though there had been earlier, and all were deleted. No change; next connection attempt does not ask for authentication. From command prompt (run As administrator): secpol.msc
Go to security settings -> local policies -> security options -> Network access: Do not allow storage of passwords and credentials for network authentication.
Enable it. Exit and reboot. No change; next connection attempt does not ask for authentication. I have tried all of these with or without rebooting immediately after.
When I turn off my laptop there is a message that tells "a programme is still running, do you want to have a forced shut down?" But there aren't any programmes running in start task manager.
when ever I shut down my PC I get a navy blue window having nothing in it but having a caption and two buttons "FORCE SHUTDOWN" and "CANCEL" and it just blinks for a second and then disappears and the PC shuts down.1. What is this message?
Is there a way to force Windows to save a programs progress (ie a rendering program such as Revit) and restart, similar to the actions it takes before the computer shuts down after the battery has died?
is there a way to force Windows 7 to unload/close/kill (last resort) applications from the virtual memory even if the gui & any icon disappeared from the desk-task bar, when i closed them ?
I run a Windows Server 2008 R2 machine that amongst other things, acts as a media store/server. I recently got a Windows Phone 7 handset that can only synchronise content via Zune (ridiculous, I know), but Zune refuses to istall on Server 2008 R2, saying it can only be installed on XP and Windows 7.I have installed most of the Win 7 components missing from Server 2008 R2 so I'm not worried about compatibility, I just want to know, how can I force install an application to an OS that it is not 'allowed' to be installed on.If I can't get Zune onto the Server, I'm effectively barred from transfering music and video to my phone.
A year ago i was needed to install software eset 32 bit (if i'm not wrong) on win 7 64bit i did it by change one paramter in the registry and it's work just fine now i need to do it againe to force installation of some program that build for 32 bit on 64 bit i can't remember where it was and i try to find it again with no luck maybe someone know
how I can force install AMD 11.6 Mobility drivers for an unsupported card? AMD's normal installers haven't been updated for my card (6750M) and as a result the installer just skips the driver install part. Can I just use the Windows driver installer and manually locate the driver files? Or is there some stuff that I have to fiddle with in the installer files?
I am looking to eliminate Virtual Memory. I have 8 gigs of ram and I want to force as much as possible to run from my ram as opposed to virtual memory.
I have an OCZ mouse driver that I would prefer to use over the standard windows HID driver as it supports extra button configuration. Unfortunately it isn't signed. Does anyone know a good way of overriding the signature enforcement in Win7 x64? The solutions I have seen either require using the boot-loader menu every time you start windows or using rather dubious third-party software - neither of which seem to be good solutions...
Is there a driver for the force feedback 2 joystick that works on windows 7? If not, what is a good controler for Flight Simulator 2000 and the combat flight simulators?
I recently got a copy of Warhammer Dawn of War II. The game seems to be consulting" dxdiag.exe when I adjust the graphics detail of the game.Here is the problem, dxdiag when launched insists on displaying my secondary Intel GPU. My laptop has switchable graphics, but even if I force the usage of the primary Nvidia GPU (GT540M) through the Nvidia control panel it still detects the Intel one.
I am new to Windows 7 and I have a question that I need an answer to if at all possible.I was told there is a way to force a program to use all of my processors and Ram memory. I need to figure out if this possible and what I have to do to accomplish this.I am wanting to force a video game to use all four processors and all/ more Ram memory than the game was designed to use. According the Game manufacturs/ producer I was informed to use Msconfig to set up this procedure and for it to work properly. Is this correct or is there a different way I can force this game to work better?
I'm installing some adobe software, which, for some reason, requires chrome to close.When I close chrome.exe, I get this error:This only happens to the main chrome.exe process, not the browser, extensions, etc.
This is starting to drive me nuts sometimes. I remote into my desktop at home from work sometimes and depending on applications, when I go for a reboot or shut the PC down, it hangs and I can't remote back in. A few days ago I waited 5 hours and had to go home to click "Force shutdown" on the prompt that Windows 7 had waiting for me.
how to force any *.sdf file to open with My program ?for example: every *.sdf file will open with this program: d:MyProg.exei need any registry value for this
