Windows 7 Installation Won't Recognize HDD When Installing Intel Rapid Storage
Jun 21, 2012
We'll I've found others with similar issues, but none exactly like this. Have the HDD and SDD setup on RAID0 due to using IRST. 64Gb of the SDD is allocated as RAID0. When W7 prompts me to select the drive for W7 installation the only disk that appears is the 64Gb unallocated SDD sector.I've loaded the IRST 64bit drivers from the ASUS Mobo disk too. It recognizes the file I direct it to, but once loaded it still only recognizes the 64Gb unallocated SDD.
View 2 Replies
ADVERTISEMENT
Dec 19, 2012
My Windows 7 is running slow however it is different from simply lagging. The mouse works fine however clicking on applications does not bring them up. The only difference I can see is an error message coming up saying "Intel Rapid Storage Technology not working". Any ideas on what I should do or extra information you require?
View 1 Replies
View Related
Feb 25, 2012
I had it installed previously on my computer, but it was in Program Files x86, so I uninstalled it and tried to reinstall, but am greeted by a blank install box that I cannot read. The only visible option is the OK button which cancels the install. [code] I am running Win 7 64 bit on a P6TD Deluxe board with my main drive a CORSAIR CMFSSD-128GBG2D.
View 1 Replies
View Related
Jan 17, 2012
I can't find my ssd in intel rapid storage technology, ahci and raid. Because I want to use it for caching. It's detected in the bios and windows explorer. My ssd is corsair sata3 60gb running the latest firmware 1.3.3
View 1 Replies
View Related
Nov 19, 2010
I put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
View 1 Replies
View Related
Oct 23, 2011
I received this message today on my screen. I went to Intel but could not understand what they were telling me to do something about BIOS nnd Sata and now I'm lost. My computer has just slowed down to a crawl these last 4 or 5 days, could this be the problem. I'm a novice and quite lost. My browsers and mail programs are working at a crawl.
View 1 Replies
View Related
Nov 16, 2012
Skill Level: Beginner
Dell Inspiron i14z Ultrabook 500gb Hybrid SSD
Ok, I reinstalled Windows 7, it detected two hard drives, one 32gb and other 466gb, I installed the Windows 7 on the 466GB and installed all the drivers. On the Intel Rapid Storage Technology, Storage View, the SSD has 30GB Cache Volume but does not have any Data Volume like it is supposed to: Picture Below: View image: SDC11483 How do I create Data Volume?Notice it has Data Volume AND Cache Volume split in the SSD?
View 2 Replies
View Related
Oct 23, 2009
I am using an Asus x58 P6TDeluxe and running Windows 7 x64 OEM. I have tried installing the chipset driver and intel matrix storage manager driver (to get SAS working) but both say "Does not support this operating system WNT_6.0P_64_MCE" and "This computer does not meet the minimum requirements for installing this software. Setup will exit".
Tried using 32,64, vista, 7, everything.
Can somebody shine some light on my situation?
View 7 Replies
View Related
Dec 7, 2012
New IRST v11.7.0.1013: 11.7.0.1013 Production Version Release Notes Official Intel v11.7.0.1013 Driver, I do not know if you're like me that has the IRST v11.2.0.1006 version driver on their machine for a while (iaStor.sys), but couldn't successfully install the v11.6.0.1030 I think the bug for me looks like a little that: Quote: 4160542 Placing OS on 2-drive RAID0 volume at end of matrix array causes RST to construe incorrect HDD as the system Windows 7-64 Any feedback will be appreciated as i still can't install properly those new versions since v11.2.0.1006.
View 2 Replies
View Related
Oct 14, 2011
Keyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be:C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.
View 2 Replies
View Related
Nov 23, 2011
I have Acer Aspire 5738ZG Laptop with windows7 and suddenly my all four ports can't recognize any removable storage such as usb Flash Memory stick or Itisaluna (USB Internet stick) except for my external mouse could be working fine and I don't know how I can fix this problem without formatting
View 1 Replies
View Related
Oct 13, 2011
I have a Toshiba Satellite lap top. It does not recognize my card reader when I connect it. What can I do?
View 2 Replies
View Related
Jun 17, 2011
After completing the Windows 7 64 bit install, the screen goes black with a white blinking cursor. After rebooting the screen freezes at the �Starting Windows� screen which should proceed with the configuration of the Windows 7 install (select computer & user name, etc.) Before the �Starting Windows� screen there is the following message: �Boot from AHCI CD-ROM� or something similar. This was not present when XP was running successfully. Throughout this process I ran into a BSOD which mentioned iaStorV.sys which apparently relates to the Intel Matrix Storage Manager as explained here.
Action Taken:
-I tried repairing the windows installation using the Windows 7 DVD, but it could not find anything.
-I tried booting into safe mode, but it said Windows needs to install first.
Version Numbers & BIOS Setetings:
ThinkStation S10 6423 CTO
Flash EEPROM Revision Level: 2WKT32AUS
[code]....
View 7 Replies
View Related
Dec 15, 2011
I'm trying to download the latest Intel Matrix Storage Manager. I'm using Windows 7 HP 64 Bit. I went to Intel and downloaded the one I thought was for my operating system but when I tried to install it I was told that my OS was not the right one for that download.
View 1 Replies
View Related
Mar 23, 2011
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
View 1 Replies
View Related
Mar 12, 2012
I get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard
Intel Core i5-2500 Processor
4x 1GB DDR3
Radeon 4870 Graphics Card
530 watt Power Supply
Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. )
Maxtor 500GB 7200 RPM SATA HDD
No Disc Drive Atm Installing from Flash Drive
View 3 Replies
View Related
Sep 8, 2010
I have recently built my own desktop pc and installed windows 7 ultimate 32 bit with no problems at all. I now am trying to upgrade to 64 bit but windows will not recognize any of my drives to install windows files to.
View 1 Replies
View Related
Jan 15, 2013
I'm trying to do a clean install of windows 7 (by booting the computer into the CD) but no drives show up. This usually happens to me so no big deal. The problem is.. recently I got a "new" computer, made out of old parts of other computers. SO i have no drivers CD.. So i have no SATA drivers...I tried to download about 30 so far with no luck. Simply because I have no idea what I should download.I simply don't know if sata drivers come from the HDD i have, from the motherboard, from the chip of the motherboard.. i have no clue.Here's my computer info you may need:I've seen posts saying to in the bios change from whatever I have to IDE or to something else, but I have no clue what that does so i would rather avoid it if possible. If there's no other solution, what does it actually do if i change from SATA to something else? (if its even SATA what I have).
View 9 Replies
View Related
Jan 4, 2012
Windows 7 doesn't recognize my WD HDD during installation?trouble shooting:This is what i did..... I took a laptop hdd and placed it into my desktop. I booted my desktop with the laptop hdd. I then placed the WD HDD ( the one that i've been having trouble with) as a second hard drive. I noticed that windows recognized the WD HDD and could write to it. I also reformatted the WD HDD. I then tried to run the windows installation from my laptop hdd so i could install it on my WD HDD and once again it didn't recognize it. I thought maybe i could clone my laptop HDD to my WD HDD with Acronis "clone software" and it couldn't recognize the WD HDD as well. This is frustrating...... Why can i write to the WD HDD but cant install the OS.
View 2 Replies
View Related
Oct 30, 2012
I've had windows 7 64bit installed on my PC and I converted one drive to bitlocker drive, it was working fine
and today after windows went crashing I've freshly installed windows7 64 bit enterprise but I cannot find my bitlocker drive it appears on the disk management as unallocated!
View 9 Replies
View Related
Oct 1, 2010
My mother asked me to fix her computer, his window XP is badly corrupted, so I tried to install Window 7 on her computer. However, the hard drive didn't show on the screen. I found it quite odd because BIOS detected it as IDE driver, and it's a SATA driver. I tried to install with old Window XP installation CD. Same thing, doesn't show on the window XP installation screen either.
I tried to hook hard drive on other computer, and was testing with Window 7 XD and see if it was working, and it did. It shown on the disk screen. My guess that it's probably the BIOS that occurred, or perhaps other things. I have one hard drive, nothing more.
View 9 Replies
View Related
Nov 28, 2012
I have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H
Intel core i5 2500k
WD Caviar Black 1TB SATA 3 7200 rpm
Btw the HDD appears in the Bios.
View 10 Replies
View Related
Dec 27, 2012
i recently tried to upgrade my computer by installing a new OCZ Agility III SSD. I didn't really want to reinstall windows as it is an OEM install and I dont have the disk. I therefore took the supposedly easy way out and bought a OCZ SSD Upgrade kit which contained Acronis True Image HD software to "Easily Clone and Transfer Data" as per the front of the box.The existing drives were 2 Seagate 500GB drive in a RAID0 Configuration All seemed to go well with cloning the drive, booting off the SSD until I noticed that no mass storage devices I have were being recognised anymore, all of which worked perfectly with the old RAID0 drives.
I have tried everything that I can find on this forum to no avail, however, I am not a computer expert, but a reasonably competent home user. On my motherboard (Foxconn H67MP), I have 2 yellow and 4 blue SATA ports. At the moment, I have the SSD in a blue port and have left the old disks in a RAID array on the yellow ones as I think they are the only ports that support RAID. During the installation, I repartitioned the RAID drives to create a backup partition which may or may not be relevant?I have 3 External HD, 2 WD and an Iomega all of which worked before installing the SSD. The WDs are USB powered and the Iomega (shows in device manager as Samsung HD503HI) is externally powered but none of them show in disk management. I can see the drives in device manager with a yellow warning triangle, however not in disk management. I have tried uninstalling the drives, the USB controllers, disabling power management?
View 6 Replies
View Related
Oct 8, 2012
I have Compaq Presario CQ61-405SF and i try to doing clean installation of windows 7 but setup can not find my hard disk and i need to find Mass storage device driver. find mass storage of my laptop
View 9 Replies
View Related
Nov 4, 2009
does it recognize it as general how much ram, or does it go specific. sorry if its a confusing question..but i have a gig ram on this laptop and i have some used for video ram..so total is a little under 1 gig, how will windows 7 recognize this, as "your pc has 1 gig ram" or "your pc has 9** ram".
View 8 Replies
View Related
Jan 21, 2013
I'm trying to install Wireless Lan API but it comes up with the message "Not enough storage is available to process this command"
View 2 Replies
View Related
Jul 14, 2010
I've tried installing a couple times now and I keep on getting an error saying that I'm missing a driver for the DVD drive.
Thing is, I'm installing Win 7 using the DVD drive.
So I've looked for a driver for my drive (Lite-On LH-20A1S) and all I get from the Lite-On site is Firmware. I've also tried the USB/DVD Download Tool to make a bootable USB stick but that program says my .iso isn't valid.
View 3 Replies
View Related
Mar 14, 2012
I recently installed a WD 500GB Scorpio Black (Sata II).
I am using a Advent 9117, running Windows 7 32-bit. The drives works fine but was just wondering if i need to install the Intel Rapid Storage Manager/ Intel Matrix Storage Manager program and driver. Will i gain any benefits from doing so? Or is the Windows 7 driver currently installed for the hard-drive fine?
I dont use RAID array, but want to use and enable all the features on the harddrive like AHCI etc. Is this already enabled and used with the current Windows 7 driver?
View 5 Replies
View Related
Mar 4, 2010
i have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.
View 8 Replies
View Related
Mar 17, 2012
I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.
But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.
I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.
View 9 Replies
View Related
May 22, 2012
i've just installed Windows 7 ultimate x86 on my new SERVER PC and i have BSOD when it expand windows files, so i choose install it's hard drive on an another pc, then i pull back the hard drive to my server and it's work and logging to my dekstop but it's just for a while when my server pc be BSOD again?
View 1 Replies
View Related
