Not Finding Graphics Card And Monitor After Update?
Dec 28, 2011
After I reformatted windows 7 I notice that it looked funny and that my graphics card was set to standard and my monitor was set to generic pnp monitor. Ive downloaded the graphic card drivers from amd but they still dont show up.
Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
Dell Inc. Studio XPS 1645 A13
System Service Tag: 2T6BCN1 (support for this PC)
Chassis Serial Number: 2T6BCN1
Enclosure Type: Portable
To wits end I am stumped after installing a new SSD HD today and clean install of Windows 7 Home Premium 32 bit OS.The problem I am having is that in device manager under Display Adapters it list Standard VGA Graphics Adapter. Also for Monitors it Lists Generic PnP Monitor.I have downloaded and updated the latest drivers for each hardware and a I am still getting the same result.This is frustrating since I could not image my old version of Windows 7 from a larger,slower HD to the new/faster SSD HD. Windows 7 imaging suggests that the new HD must be larger than the old HD in order to do an image restore.I have read this is not the case however found that in no way have I been able to successfully image restore my old OS from the larger HD to the new smaller SSD HD.
ok I have no idea on this one and the good news is i can't fix it LOL.
i have an hp m9340f purchased a couple new nvidea graphics cards when I started getting the noisy fan issue .
Installed windows 7 everything worked great but was having problems with windows media center after I went to a 56k connection so i decided to format start over,
Everytime it installs the drivers for my nvidea graphics card my monitor goes black and has no signal. i tried both dif cards. same problem. I am guessing it is the recommended settings but since I only have one monitor I can't change the settings cause.. can't see to do it, and I have no other monitor to hook to to try.
I can start up in safe mode so any idea's how to fix this issue or change it all to 800 x 600 so i can see when it starts up with new drivers .....
i have this big problem is that my graphics card as a problem that in almost 2 years it never did thisi never had problems with this computerbut what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yeai did manage on getting a screen cap from the windows and it looks like thishe weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same resultim using Windows Ultimate 32 bit i have my graphics card connected to my TV(LCD) with a HDMI cable i thought it could be that so i tried another cable it didnt work so at this point i ran out of ideas
I have a dell inspiron 6000 and I got mobile intel 915GM/GMS,910GML express chipset family for my graphics card driver. I want to play the Dimension U game, so I have to update my graphics card driver. But I can't
about a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
I want to upgrade my GF daughters PC, she has a Dell Optiplex GX260 and I know the Graphis card will not support Aeros so I want to buy a new graphic card for it and it has to work with windows7, can some one tell me a good card to put in to it.
I purchased motherboard with the manufacturer number of MB.G0409.005 (MB.G0409.005 GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM2) on 2/3/12. I had put it into my system and then proceeded to install upgrades from the Gateway website. I saw there was a BIOS update (file: 924G1P11.ROM) available so I tried to update my BIOS. Well, after updating my BIOS with the .ROM file that I had gotten from their website [URL], but after that, the on board ATI graphics adapter is no longer working. I tried to contact Gateway with no luck and them telling me that they don't recommend updating the BIOS. I also tried to contact the place where I purchased the motherboard from and they said that they didn't have the original .ROM. The motherboard is also not listed on the Foxconn website either. I am running Windows 7 x64 Build 7601 and I have also tried using a Ubuntu 12.04 LTS live USB and that did not work as well. As far as I can tell, the BIOS will not even recognize it. I am now currently using a NVIDIA GeForce GT 220 graphics card that is plugged into the 16x PCI-E slot. I have found modified .ROM files that someone had done for this motherboard, but I don't want to risk it. And every forum and post I've come across has dead links to ones that someone has made a copy of the .ROM file and uploaded from their motherboard.
My system is a Gateway DX4300-15e with 6 gb's of DDR2 RAM (originally 8 gb's of RAM, but a 2 gb stick blew out from a power surge, hence why I had to get a new motherboard) with a AMD Phenom II x4 970 Black Edition Deneb 3.5GHz Socket AM3 processor.
I just accidentally changed my settings on my grapics card so that I can no longer see my desktop on the monitor connected to my HTPC. My HTPC has a monitor attached to it and it also has an HDMI out from the graphics card going to an LED TV in another room. I accidentally switched it so that the desktop can only be seen on the other TV in the other room.
All I can see on the monitor is the blank Windows 7 logo (no desktop icons) and I cannot navigate back to my AMD control page to undo this. I tried rebooting but this does not work. This is an issue as I don't have a bluetooth keyboard/mouse that I can use in the other room to control the desktop. How do I reset this? I am using a AMD HD 6750 graphics card.
I had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? [code]
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I'm having trouble getting Bass out of my subwoofer and need some help figuring out this problem. I have played with the WOW effects and equalizer in Windows Media Player and the subwoofer does work there, but it's very weak and doesn't kick in at all with other programs or online.
I don't know too much about audio, but I do know I'm having troubles since updating to Windows 7. I recently upgraded from Vista Home Premium to 7 Home Premium. My Audio setup is a set of Altec Lansing speakers and a Subwoofer. The system as a whole is connected to my machine at the Green audio jack. All wires are plugged in firmly and tightly.
This leads me to believe that I need to look into a Driver Update. Unfortunately, I don't know where do begin finding my Audio card type or driver. If anyone knows how to find this or figure out which Driver update might be useful for me I'd greatly appreciate it.
I'm looking for Windows 7 x64 drivers for an Xwave-192 soundcard that has a Yamaha YMF724 chipset. I need these drivers because I want to use the MIDI ports from it. I followed the moderator's steps with both WDM and non-WDM drivers offered by Yamaha for WinXP, but neither of them worked. Yamaha YMF724/740/744/754 Win7 drivers
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
So I went on a three day trip. When I got home, I turned on my computer. The cooling unit made an unusual noise, and all of a sudden the monitor turned off, as well as the computer. Now, whenever I turn on the computer, it works perfectly fine (The cooling unit noise is gone also) but the monitor just goes to the ASUS boot logo and tells me VGA no signal. Even that only happens sometimes, it will mostly just remain in sleep mode. Things I have done:
- Tried with a different monitor - Tried with DVI cable
I wish I could tell you my graphics card but I just don't remember.
update for VGA Graphics for EI-Machine Sorrento,(NOTE Windows 7 Update downloads the wrong update for driver,) have searched for an update 21/06/2006 version 6.1.7600.1635, requires and update in order to give hardware acceleration. It seems no update available unless someone knows different.
After four or five trial and error attempts of system restores to find why my computer was having such an insanely long boot time I finally discovered that it was an optional windows update titled "Intel Corporation- Display - Intel(R) HD Graphics." I avoided the update and my computer worked amazingly. However, my girlfriend recently used my computer and decided to perform some updates...the Intel HD Graphics update being one of them. So of course now my computer is experiencing the same slow boot time and general sluggishness.
I was stupid and accidentally uninstalled my AMD Catalyst Program in an attempt to update the drivers. Now I cant switch to the card from the integrated Intel card. I can't restore the computer or re-install the program. When I try to re-install it, its doesn't work but there are no errors.
the xfx 1gb 4850 i had been eying is finally off the shelves the only place i find it is at frys and it costs 150+ s&h. do you guys have any other graphics cards you would recommend within the 100-150 usd category with at least 512 mb of memory.
Currently I have a graphics card Geforce 8400 (Nvidia). I want to buy another card HD Radeon 4890. I have a Dell Optiplex 760 desktop. Do both cards work in my pc from different hardware manufacturers?
I have a sony vaio z227 laptop . it has a amd radeon hd 6650m graphics. but I can't update my driver from the amd site because the site doesn't have drivers for switchable graphics ! and the sony site doesn't update its drivers ! what should I do?
I am running 64bit Windows 7 on a DX58SO motherboard with the latest bios and board drivers downloaded from intel.- Windows 7 has all of the updates installed. After I installed SP1 I noticed that I had a yellow exclamation mark by the network adapters icon in the device manager applet with the error displayed as:
WAN Miniport (Netwprk Monitor) #2 This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The drivers as identified in the properties sheet (ndistapi.sys and ndiswan.sys) are in fact located in their proper location in Windows/System32/Drivers/
I tried to uninstall the Wan Miniport to see if a restart would load the drivers but Windows would not allow it to be uninstalled. My network is working OK so what exactly does the Network Monitor do?
