Changed Graphics Card Settings - Desktop View Lost On Main Monitor
Nov 24, 2011
I just accidentally changed my settings on my grapics card so that I can no longer see my desktop on the monitor connected to my HTPC. My HTPC has a monitor attached to it and it also has an HDMI out from the graphics card going to an LED TV in another room. I accidentally switched it so that the desktop can only be seen on the other TV in the other room.
All I can see on the monitor is the blank Windows 7 logo (no desktop icons) and I cannot navigate back to my AMD control page to undo this. I tried rebooting but this does not work. This is an issue as I don't have a bluetooth keyboard/mouse that I can use in the other room to control the desktop. How do I reset this? I am using a AMD HD 6750 graphics card.
I recently installed an old game. I'm running Win 7 Pro x64 and the game was for XP. I messed with the compatibility settings and I think something went wrong. The folder icons have changed everywhere but on the desktop. The desktop shows the regular aero styled icons. Everywhere else the folder icons are some dumbed-down picture that looks low tech even for XP. Its bright yellow and has no 3D effects. To make it even more frustrating, it only does this when the view is set to details, list, or small icons, which are the only views I ever use. What button did I push and how can I fix this?
I had Intel HD 3000 graphics but when I reformatted my computer I now have, Intel Sandybridge Mobile Graphics Chip set and my adapter type is: Standard VGA Graphics Adapter also my resolution now is 1024x768. It used to be 1280x1024. What happened? When I try updating the driver it says its already up to date.
I have a dedicated media center that has a old dell monitor (to check settings) and a 42" panasonic HD 1080 television hooked via hdmi. I'm using a combination WMC and Boxee. Problem is everytime I shut down (or just sleep) the external monitor settings >appearnace and personalization>Display>Screen Resolution> mulitple displays goes back to "show desktop only on 2" where I want it to be "duplicate these displays". so I change back and click "keep settings" and it never keeps.
For example I have a folder in my desktop with pictures, videos, documents, music, etc. I organized it by grouping by type, somewhere between large & extra large thumbnails, and a few other things. I want these settings applied to all other folders. I went to folder options and applied it to other folders. Nothing changed. My other folders, including my picture folder is still the same way it was. How do I apply to ALL folders? I know you can zoom in on thumbnails by hitting ctrl + mouse scroll wheel, but is there a way you can do it with a keyboard and not the mouse?
All of my view settings seem to stick fine, except when I choose File - Open Desktop in some application. Then it's Tiles view instead of my Details view, as saved for every other folder. in 7 x64I already tried resetting Folder view otions as per Folder View - Set a Default for All Folders
After I reformatted windows 7 I notice that it looked funny and that my graphics card was set to standard and my monitor was set to generic pnp monitor. Ive downloaded the graphic card drivers from amd but they still dont show up.
Windows 7 Home Premium (x64) Service Pack 1 (build 7601) Dell Inc. Studio XPS 1645 A13 System Service Tag: 2T6BCN1 (support for this PC) Chassis Serial Number: 2T6BCN1 Enclosure Type: Portable
To wits end I am stumped after installing a new SSD HD today and clean install of Windows 7 Home Premium 32 bit OS.The problem I am having is that in device manager under Display Adapters it list Standard VGA Graphics Adapter. Also for Monitors it Lists Generic PnP Monitor.I have downloaded and updated the latest drivers for each hardware and a I am still getting the same result.This is frustrating since I could not image my old version of Windows 7 from a larger,slower HD to the new/faster SSD HD. Windows 7 imaging suggests that the new HD must be larger than the old HD in order to do an image restore.I have read this is not the case however found that in no way have I been able to successfully image restore my old OS from the larger HD to the new smaller SSD HD.
ok I have no idea on this one and the good news is i can't fix it LOL.
i have an hp m9340f purchased a couple new nvidea graphics cards when I started getting the noisy fan issue .
Installed windows 7 everything worked great but was having problems with windows media center after I went to a 56k connection so i decided to format start over,
Everytime it installs the drivers for my nvidea graphics card my monitor goes black and has no signal. i tried both dif cards. same problem. I am guessing it is the recommended settings but since I only have one monitor I can't change the settings cause.. can't see to do it, and I have no other monitor to hook to to try.
I can start up in safe mode so any idea's how to fix this issue or change it all to 800 x 600 so i can see when it starts up with new drivers .....
i have this big problem is that my graphics card as a problem that in almost 2 years it never did thisi never had problems with this computerbut what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yeai did manage on getting a screen cap from the windows and it looks like thishe weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same resultim using Windows Ultimate 32 bit i have my graphics card connected to my TV(LCD) with a HDMI cable i thought it could be that so i tried another cable it didnt work so at this point i ran out of ideas
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
about a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
i was having a problem with a usb driver i downloaded for my motorola phone. I found that out because every time i disconnected it from my laptop a blue screen would pop up and would restart my computer. This happened to me 3 times. A while ago i was playing my games perfectly with my main graphics card the Nvidia GT 555m. I was charging my phone then i disconnected the usb then the blue screen popped again and restarted my laptop. I then tried fixing the driver problem and i did. The only problem was when i tried playing my games it was running slow and i noticed that it was running on the integrated graphics card Intel R graphics HD card. I went to check under display adapters and noticed that the Dedicated graphics card Nvidia Gt 555m was not there anymore.
I have two monitors on my system (win 7) and from time to time the main monitor gets turned down in brightness. The other monitor is just find but something ( a virus, malware or program) is turning the brightness down for no reason. I have run malware and virus protection and found nothing.. Sometime is will be in the middle of a session and other times it will be on boot. It's not the monitor I'm sure (turning it on and off does not work) and it's always the same monitor that is effected.
System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit Processor: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz, x64 Family 6 Model 23 Stepping 10 Processor Count: 4 RAM: 3583 Mb Graphics Card: NVIDIA GeForce 9800 GT , 512 Mb Hard Drives: C: Total - 953867 MB, Free - 492460 MB; D: Total - 476937 MB, Free - 252870 MB; E: Total - 305242 MB, Free - 36973 MB; Motherboard: ASUSTeK Computer INC., P5KPL-CM, x.xx, MS1C94BACF02445 Antivirus: Avanquest SystemSuite, Updated and Enabled
i ran the program speedbit video accelerator and ever since then my computer notifies me that my browser settings have been changed. It does it more frequently at times and not so frequent at other times. Iv had another program on my computer for a few months that has run great everyday of the week up until today. Iv always run this program from the desktop shortcut, it has a system check and it always goes good except now when i try and open it from the desktop shortcut the system check looks like what i attached its supposed to have all green check marks. i can run the program now but i have to open it thru my internet explorer. and the desktop icon changed for the programs shortcut.
you will have to bare with me as my technical knowledge of computers is very limted!Whilst trying to join the local homegroup network, I found out the issue was that my WORK laptop was connected to a domain & unable to share files because of being connected to this EX company domain/network.Naively, without first checking consquences, disconnected from the WORK domain & made the computer use for home & renamed it. Upon doing so, was asked to re-boot.On re-booting, the adminstator login password had resorted back to the one when setup originally?? As my normal password was not being accepted. I must add - I NO LONGER WORK FOR SAID COMPANY AND HAVE NO WAY OF ACCQUIRING PASSWORD/NETWORK/DOMAIN ACCESS DETAILS ANYMORE!I then used the windows password unlocker tool (20 paid) to gain access back to my laptop. Obviously now realising a lot of very important information, emails, all desktop icons & file locations were no longer where they were supposed to be I spent an hour searching everywhere... The hard drive is still saying it has 150gigabyte of use & certain files display more data in 'properties' than is actually displayed in the folder itself. After doing a little research it looks like all my files, emails etc are in this imaginery 'domain' that I am now unable to access at all & no longer have the details to re-join again! A few files are still dotted around where they are supposed to be but a lot no longer accessable.With no access details to re-join this domain, is there any way AT ALL of re-claiming these files? Any 3rd party software, hard drive recovery software? Easiest way,
I have been incredibly stupid and changed the settings in my BIOS setup. What is even more stupid is I did this by making it "Load Optimal Defaults" so I dont actually know what has been changed.As a result of this windows 7 now cannot start, it brings you to the error fixing part where it searches for errors, cant find any and offers you some more options including system restore. Ive done a system restore but that has also not fixed it. I have little idea how to fix this, windows 7 was working perfectly until I changed the BIOS, but not knowing what was changed means I cant change it back.The BIOS version is: 4core1600twins-p35 p1.40.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
my computer was getting too hot i went into the BIOS and changed a few things like turning off the auto-controlled fan sensors, FSB i put down to 200 and the CPU voltage I changed to 1.0Volts. I started up windows again. This time though, the option for "hibernate" had disappeared. So i looked up how to put it back on. and changed the power settings to "never" allow "hybrid sleep". So now i have the option to hibernate again. But the strange part was this. When I put my computer to sleep now. It apparently shuts down fully. (no more blinking light) then i turn it on and it re awakes from sleep. It's actually nice to have it this way. I tested it to see if i could disconnect the power fully and then still restore it back from sleep. Sure enough it lets me disconnect the power for up to 5 seconds then i plug it back in and it will still restore back from sleep. I guess my question is. Is the computer using even less power now to keep the information on the RAM. I read somewhere that on average your computer uses about 6 watts while in sleep mode.
I have a few portable programs on my computer. How do I update them without losing any settings etc. that I have changed? Do I move ".ini files" and/or ".cfg files" and/or "whatever" out of the old version of the program and into the new?
so I was on my desktop main account and then let my dad log on to a guest account I recently created for him since his laptop isn't working, then when I came back I logged onto my profile I couldn't open any browser, in the case of firefox this came up (firefox can't load host something, missing profile) and chrome (your preferences cannot be read)
then I couln't open some shorcuts (windows cannot find the target. and my utorrent setting reset as well, like if I had never used it, BUT the guest account works perfectly.
I'm able to open firefox with open as administrator but all addons, bookmarks are gone, I can't open the document, picture, and music links on the start menu either
Is there any way to make a reg file that I can tweak ALL the windows explorer views to show just the following: Name | Size | Date modifiedWindows drives me crazy with it's "defaults" for various views.
For all of my folders, I use the detailed view in Explorer, but for one specific folder I sometimes want to use tiled view. I mean I mostly want to use detailed view, but on some specific occasions I need to use tiled view for that folder.possible is to create a shortcut (e.g. from my Desktop) to that folder, in such a way that the shortcut properties specify which view should be used when the folder is opened using that particular shortcut.Alternatively, is there a way that a folder can be launched with certain view settings, using e.g. a script or command-line method?
I have an MS windows 7 64 bit system. I used CCleaner to clean the registry but did not backup the changes. I have lost my media and video thumbnail view for my movie files with an avi extension. I use both winamp and a VLC media player to play my movies and tv programs.Could the registry cleaning have changed something and is there a way to get the thumbnails back?
Vista allowed the contents of a window to be sorted by name, date modified, etc in any view -- but it appears Windows 7 drops that menu bar for all views other than "details" view. I can right-click within the box to sort, but it's very inefficient. retain that detail bar in all views?
I reckon that I must have changed some setting somewhere - when viewing websites (in Firefox or explorer), all websites seem to have lost their formatting - they are white with few graphics, and plain boxes around text. What needs to be changed to get this back to normal web viewing? Also, even if I try to change the theme through the control panel, there is no change to anything other than the desktop image. The appearance of the windows stays the same ugly chrome colour! I'm running Windows 7 on an HP Envy laptop...
I installed a program the other day that messed with my Windows Explorer. Now no folder will remember it's View options (Large Icons, List, Details), they all reset to their default.
As you can see it's nothing to do with Libraries. Neither the 'Shell Fix' nor editing the registry at
