my computer was getting too hot i went into the BIOS and changed a few things like turning off the auto-controlled fan sensors, FSB i put down to 200 and the CPU voltage I changed to 1.0Volts. I started up windows again. This time though, the option for "hibernate" had disappeared. So i looked up how to put it back on. and changed the power settings to "never" allow "hybrid sleep". So now i have the option to hibernate again. But the strange part was this. When I put my computer to sleep now. It apparently shuts down fully. (no more blinking light) then i turn it on and it re awakes from sleep. It's actually nice to have it this way. I tested it to see if i could disconnect the power fully and then still restore it back from sleep. Sure enough it lets me disconnect the power for up to 5 seconds then i plug it back in and it will still restore back from sleep. I guess my question is. Is the computer using even less power now to keep the information on the RAM. I read somewhere that on average your computer uses about 6 watts while in sleep mode.
I have been incredibly stupid and changed the settings in my BIOS setup. What is even more stupid is I did this by making it "Load Optimal Defaults" so I dont actually know what has been changed.As a result of this windows 7 now cannot start, it brings you to the error fixing part where it searches for errors, cant find any and offers you some more options including system restore. Ive done a system restore but that has also not fixed it. I have little idea how to fix this, windows 7 was working perfectly until I changed the BIOS, but not knowing what was changed means I cant change it back.The BIOS version is: 4core1600twins-p35 p1.40.
system:GA-Z68X-UD4-B3G Skill ripjaws 1600 8gbi5 2500KGTS 250Lite-On ihas324Cavia Green 1.5 TBAntec 620c neo ecoAntec 300 caseok, where do I begin.... So my computer went into sleep mode.... its really hit or miss with this computer so when I finally get it back up and running, I will completely disable sleep mode.Sometimes i can click the mouse and it wakes up with no problem, but sometimes it would reboot on its own and just keep trying to boot and restart.... continuous boot loop.... so when i want to remedy this, I just clear the cmos by unplugging the power supply and disconnecting the cmos battery.... it always worked I tried to pull the battery and left it out for 60 minutes.. popped it back in and it won't let me get into bios. None of my keyboards will light up for me to hit delete to get into bios.... not even my PS2 keyboard.... it will just continue to turn on, and show the logo screen telling me to hit various keys for various functions and then it will reboot on its own and it will just continue to do this and will not let me hit a key to get into the BIOS screens
I got a Dell Optiplex GX520. When I try to boot, after the windows logo comes on screen, the pc goes into sleep mode. This also happens in safe mode. I found out that it had a faulty HDD. So I replaced it. However when I try to start from Windows install disk it goes into sleep mode right after it shows de Loading Windows logo. I tried to go in to the bios to load the optimized settings but when I press F2 to load the system setup the computer goes into sleep mode.
So basically I cant do anything to boot or to re-install Windows.
some other things I tried:
- check PSU with PSU tester: PSU ok
- boot without DVD station: still going into sleep mode
- boot in safe mode: sleep mode again
- last known good configuration: sleep mode
- swapped RAM: still same issue... sleep mode FTL
I cant test GFX cause its on board and theres no AGP or PCI-e slot on the mobo.
I am new to windows 7 and I left my computer on cause I was downloading something came back like 3hrs later and noticed my computers hard drive led light and power light was blinking like every 3 seconds. I then clicked the power button and it went through bios again and said windows is resuming I think and everything was how it was when I left it but my download had stopped. So how do I make it so my computer doesn't go into sleep?
I used to have Vista basic installed on my Medion Intel Core 2 Duo machine but then gave Ubuntu 10.04 (Lucid Lynx) a try.After buying Win 7 Ultimate I want to install it and erase Ubuntu (mainly because of poor support for Tascam audio/midi interfaces). I do not want to install them side by side and then erase Ubuntu as I want to avoid the Fix MBR issue.After inserting the installer DVD I get the usual message "Click any key to boot from CD" but pressing keys on my USB keyboard or mouse does not appear to do anything. I have tried various keyboards including serial port devices but the result is always the same.Has Ubuntu changed anything in the BIOS or else how can I solve this problem of not being able to use the keyboard when trying to boot?
i ran the program speedbit video accelerator and ever since then my computer notifies me that my browser settings have been changed. It does it more frequently at times and not so frequent at other times. Iv had another program on my computer for a few months that has run great everyday of the week up until today. Iv always run this program from the desktop shortcut, it has a system check and it always goes good except now when i try and open it from the desktop shortcut the system check looks like what i attached its supposed to have all green check marks. i can run the program now but i have to open it thru my internet explorer. and the desktop icon changed for the programs shortcut.
Yesterday I was attempting to wipe my hard drive as I was putting my laptop for sale. Whilst it was wiping my laptop crashed and would not re boot properly but I was able to access the BIOS . I stupidly changed some settings following some advice on a forum I now cannot find and when I tried to re boot it stays on the philips page for around 10 minutes. None of the keys work, like F12, F2 ect. After ten minutes it give me a screen thats says 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fThis is how I understand it as my system is in Polish and Polish is not my first language and with technical language I am not fluent and I beleive thats how I made the mistake in the first place in the BIOS.
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
I recently installed an old game. I'm running Win 7 Pro x64 and the game was for XP. I messed with the compatibility settings and I think something went wrong. The folder icons have changed everywhere but on the desktop. The desktop shows the regular aero styled icons. Everywhere else the folder icons are some dumbed-down picture that looks low tech even for XP. Its bright yellow and has no 3D effects. To make it even more frustrating, it only does this when the view is set to details, list, or small icons, which are the only views I ever use. What button did I push and how can I fix this?
I have a few portable programs on my computer. How do I update them without losing any settings etc. that I have changed? Do I move ".ini files" and/or ".cfg files" and/or "whatever" out of the old version of the program and into the new?
Ever since I changed my power supply from an Orion 480W to my current Cooler Master power supply, my pc will not sleep. It initiates sleep but then immediately turns back on and boots to the login screen. I have tried everything! From powercfg in cmd to changing the seetings on the motherboard in bios, and disabling all hardware from waking my system up to changing the power supply settings in windows. I am considering doing a reinstall of windows
My Acer Aspire one D257 will not restore. Error code is 0x8007191. All desktop icons when clicked go to "notepad" and "notepad" showing for everything to the left except for internet explorer. I have tried restore 6 times but it just comes back with. Bottom right hand icons still normal...files can be accessed through start docs. pics, etc. I have backed up to a remote drive all files for safety but just cannot get system or files to restore.System restore did not complete successfully. Your computors files and settings were not changed.Details System restore failed while restoring the registry from the restore point. An unspecified error occurred during System Restore (0x80071a91) The error code has just changed to the above.
I just accidentally changed my settings on my grapics card so that I can no longer see my desktop on the monitor connected to my HTPC. My HTPC has a monitor attached to it and it also has an HDMI out from the graphics card going to an LED TV in another room. I accidentally switched it so that the desktop can only be seen on the other TV in the other room.
All I can see on the monitor is the blank Windows 7 logo (no desktop icons) and I cannot navigate back to my AMD control page to undo this. I tried rebooting but this does not work. This is an issue as I don't have a bluetooth keyboard/mouse that I can use in the other room to control the desktop. How do I reset this? I am using a AMD HD 6750 graphics card.
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
At my company I setup and deploy many windows 7 machines. I use a start-up batch file to do most of the work and a few other files in the start-up folder, this is all imaged to the hard drive with a hard drive duplicator. The batch file runs once and deletes it self. Anyways, that is the general idea of what is going on. the only thing left that I have to do manually is change the BIOS settings, USB enabled/disabled, behavior on power up, BIOS password, ect... Is there any way I could automate this process, preferably a command line?
Mine is gigabyte g31 mother board it is taking too long time to install windows 7 or 8 into it , it will asks press any key to boot from CD\DVD and i pressed after that ,it will start loading windows files and logo will appear and it takes more than 3 minutes to show install windows and also after that it takes 3 minutes to show setup is starting up.
I have a Compaq 6530b laptop and am running Windows 7 Home Premium 32bit. I want to enable bluetooth on the laptop, but the Device Manager says it is disabled in the BIOS and to activate it with F10 on boot.. the problem is it asks for a BIOS password and I keep guessing and cant figure out what it is! Is there a simple way to reset the BIOS password or crack it? I took out the CMOS battery and waited 10 minutes, but that didnt do anything.
I have a case where the task is to alter 250+ HP laptops with OEM factory image before firstboot. The purpose of this is to be able to use the preinstalled image of Win 7 Pro x64 on the laptops instead of using a generic VLA installation image (don't ask why).
Is there any way to modify the SetupComplete.Cmd or any other pertinent scripts/reg keys that the Windows OEM Preinstallation Kit or sysprep is using or any custom HP firstboot scripts so the bloatware and custom HP settings (except drivers) are not being installed or applied?
I've got got a new tower with windows 7, its been fine for the last 3 weeks, yet today it keeps going to sleep and taking me to the switch user screen, I've checked all the settings and they are ok, and I am the only user account on it?
My monitor goes to sleep after about 10 minutes when I am watching a movie or something. Its really annoying because I have changed the screensaver and monitor power settings (in display settings) to never, I have changed the power settings (in Control Panel -> Power Settings -> Edit Settings -> Advanced) and put everything at never. Still the problem persists.
I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
I am trying to update the BIOS of my 'ASrock Z68 Extreme4 Gen3' from v1.00 to v1.20. I am running Windows 7 64bit Ultimate. I got the BIOS file from: [URL]. It did not register the BIOS file I had put on my USB drive when going to my BIOS settings. There is an "Instant Flash" function in there. I have tried to make a bootable USB-drive to do it directly from DOS, but my drive can't be formatted as an MS-DOS boot drive. I have tried using HP DriveKey which seemed to work as intended, but it didn't work, the drive was still not recognized in bios. Do you think it's my drive? I don't have another drive with me right now to try it out. I know this is a not really a Windows 7 issue, but I couldn't find a proper category.
