Correct Bios Settings Of Windows 7?
Sep 7, 2010send the correct bios settings of windows 7.
View 4 Repliessend the correct bios settings of windows 7.
View 4 RepliesI updated the bios on my Toshiba laptop from ver. 3.4 to ver 3.5. The registry does not reflect the change and still shows 3.4. Can the registry be altered to show the correct version?
View 4 Replies View RelatedWhen there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
View 2 Replies View RelatedAt my company I setup and deploy many windows 7 machines. I use a start-up batch file to do most of the work and a few other files in the start-up folder, this is all imaged to the hard drive with a hard drive duplicator. The batch file runs once and deletes it self. Anyways, that is the general idea of what is going on. the only thing left that I have to do manually is change the BIOS settings, USB enabled/disabled, behavior on power up, BIOS password, ect... Is there any way I could automate this process, preferably a command line?
View 4 Replies View RelatedI have been incredibly stupid and changed the settings in my BIOS setup. What is even more stupid is I did this by making it "Load Optimal Defaults" so I dont actually know what has been changed.As a result of this windows 7 now cannot start, it brings you to the error fixing part where it searches for errors, cant find any and offers you some more options including system restore. Ive done a system restore but that has also not fixed it. I have little idea how to fix this, windows 7 was working perfectly until I changed the BIOS, but not knowing what was changed means I cant change it back.The BIOS version is: 4core1600twins-p35 p1.40.
View 4 Replies View Relatedi can't access BIOS sttings of my Lenovo G580 i have windows 7 operation system loaded on my laptop
View 1 Replies View RelatedCan you tell me short key how to open BIOS settings.
View 1 Replies View RelatedMine is gigabyte g31 mother board it is taking too long time to install windows 7 or 8 into it , it will asks press any key to boot from CD\DVD and i pressed after that ,it will start loading windows files and logo will appear and it takes more than 3 minutes to show install windows and also after that it takes 3 minutes to show setup is starting up.
View 3 Replies View RelatedI have a Compaq 6530b laptop and am running Windows 7 Home Premium 32bit. I want to enable bluetooth on the laptop, but the Device Manager says it is disabled in the BIOS and to activate it with F10 on boot.. the problem is it asks for a BIOS password and I keep guessing and cant figure out what it is! Is there a simple way to reset the BIOS password or crack it? I took out the CMOS battery and waited 10 minutes, but that didnt do anything.
View 3 Replies View Relatedwhy is the bios on the Gateway nv5378u laptop very limited settings
View 4 Replies View RelatedI am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
my computer was getting too hot i went into the BIOS and changed a few things like turning off the auto-controlled fan sensors, FSB i put down to 200 and the CPU voltage I changed to 1.0Volts. I started up windows again. This time though, the option for "hibernate" had disappeared. So i looked up how to put it back on. and changed the power settings to "never" allow "hybrid sleep". So now i have the option to hibernate again. But the strange part was this. When I put my computer to sleep now. It apparently shuts down fully. (no more blinking light) then i turn it on and it re awakes from sleep. It's actually nice to have it this way. I tested it to see if i could disconnect the power fully and then still restore it back from sleep. Sure enough it lets me disconnect the power for up to 5 seconds then i plug it back in and it will still restore back from sleep. I guess my question is. Is the computer using even less power now to keep the information on the RAM. I read somewhere that on average your computer uses about 6 watts while in sleep mode.
View 2 Replies View RelatedI am trying to update the BIOS of my 'ASrock Z68 Extreme4 Gen3' from v1.00 to v1.20. I am running Windows 7 64bit Ultimate. I got the BIOS file from: [URL]. It did not register the BIOS file I had put on my USB drive when going to my BIOS settings. There is an "Instant Flash" function in there. I have tried to make a bootable USB-drive to do it directly from DOS, but my drive can't be formatted as an MS-DOS boot drive. I have tried using HP DriveKey which seemed to work as intended, but it didn't work, the drive was still not recognized in bios. Do you think it's my drive? I don't have another drive with me right now to try it out. I know this is a not really a Windows 7 issue, but I couldn't find a proper category.
View 6 Replies View Relatedhow to open hidden inside bios advanced settings for hp 635 notebook
View 2 Replies View RelatedI need some information regarding the convertion of SATA to AHCI.I have built a new PC with i5 2500K,Asus P8Z77 M Pro Motherboard and 8GB Transcend RAM.I tried to install Windows 7 ultimate after formatting my old hard disk(Segate Bracuda 500 GB).I got an error as "Enable Host Controller in BIOS settings"Then i surfed and found that this is the issue with SATA to AHCI Conversion.I also found a Microsoft KB Error message when you start a Windows 7 or Windows Vista-based computer after you change the SATA mode of the boot drive: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE". The KB has a Auto fix setup file that can be installed on a pre installed hard disk. But i have formatted my disk and i couldn't install a new copy of windows 7.There is an auto run files for the same Auto Fix but when i tried to boot the auto fix from a USB stick,i got an error "Please insert Floppy Disk for copying files".I dont have a floppy drive attached to my new computer.let me connect it to my old computer(intel dual core with mercury motherboard) and install window7 in it with the Auto fix installed on it and if i connect it to my new computer and boot it will it be working?Is SATA will be converted to AHCI after doing this?
View 9 Replies View Relatedwindows 7 desktop settings changed my customized settings after logging on..
View 5 Replies View RelatedI have 3 hdd. All of them are sata and i can see the corect order showed in BIOS
View 5 Replies View RelatedA while ago, I had a triple boot system, but now, I'm using one of the hard drives for something else, so now it is only dual-boot. However, for some reason, I cannot get Windows 7 to see the new boot file.I constructed the original boot system with EasyBCD. Absolutely no problems whatsoever. When I started up the software to make the dual-boot system, it said it couldn't find my boot files. So, I constructed the dual-boot system, and I wrote it on the drive. However, when I start up the computer, I still see the old triple boot menu. I tried clearing it with the Windows 7 restore disk, but it doesn't see Windows 7 on the hard drive.
View 9 Replies View RelatedIs there something I can adjust to correct this? I have a brand new acer net book that I purchased yesterday and had this problem the minute I used it. I would like to make all aware that I am a kitchen and bath replacement specialist and an excellent tile setter since 1978 in the Phila. area
View 9 Replies View RelatedI am just checking before I do it if the steps are correct.
Q: Why am I doing this?
A: I have both retail versions of Windows 7 x32 and x64 and need to install both on one HDD, I have two unique keys also. This is used for my work machine for software testing.
I have a single SATA 250GB HDD which is a new HDD, completely un-used.
The steps I think are correct are as follows;
* Insert Windows 7 x32 into drive and proceed with setup.
* Click advanced drive options and click New, create the first partition 50% of my full HDD space.
* Click New and create the 2nd partition with the same size as previous.
* Install Windows onto Partition 1 as normal.
* Insert Windows 7 x64 into drive and proceed with setup.
* Install Windows 7 onto Partition 2 as normal.
Use the unique license key for each install, cannot use the same key for both.
Both operating systems are now installed and can be chosen on boot, each has the same available size.
One question I am wondering is does this process create 2 System Partitions for recovery files like it does when doing a single install? If so do I need to incorporate the 200MB size allocated when I am choosing each partition size?
I know this can also be done via disk management after one is installed then shrinking the volume by a max of 50% but I want to know the clean install route as mentioned above.
All my icons, except the one of the thrash bin and those that represent a Word file, are white, no picture. Both on screen and in the task bar. Is there a way to get that rioght again ? (Windows 7 Home Premium)
View 7 Replies View RelatedI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
Windows 7 on Novell Network. On boot up the Novell Logon screen comes up first and Username is correct and then Password is entered. The next screen is the Windows 7 Logon. The username is incorrect and no password is used. The correct username must be typed in.How do I get the correct username in the Windows 7 Logon on boot up of machine? On my XP machines the NWGINA.dll handles this procedure. What handles the boot up in Windows 7 and how do you put in the defaults?
View 2 Replies View Relatedi am having an issue with my windows 7 icons not showing the proper picture on the taskbar. i recently reinstalled windows 7 ultimate. all of the programs open properly when you click them but they just do not show the proper icon. it just looks like a broken image and they are all the same.
View 5 Replies View RelatedI have a Sabrent TV-USB20 and running Windows 7 Ultimate x64bit on my PCinstalled the driver for my platform on Sabrent USAall 3 options, tried one after another, I installed them on my computer, but still after this, the computer does not recognize the device.I go to install manually through Add Hardware or device manager and Windows says that the driver is not compatible with windows 7 64bit (even when I'm installing driver for Windows 7).
View 9 Replies View Relatedwhen you click the Microsoft Windows flag/symbol/orb.
I search for a word: episodic. The results are only 1 word document which has a question: What is episodic.
The Windows 7 search does not find my 2nd word document which has the answer: Episodic is... nor does Windows 7 search find other powerpoint lectures and presentations including the definition of the word episodic?
I would like to download the 64-bit version of Windows 7 Service Pack 1 to patch my system.
1) Is this the correct Service Pack 1 installation file for Windows 7 Professional 64-bit?
Windows6.1-KB976932-X64.exe
2) Do I need to download and install any of the other .Symbols files from the website?
3) I am installing a new PC with Windows 7 Professional RTM from the DVD. Can I install SP1 immediately after installing Windows 7, or do I need to do a Windows Update first?
What is the correct sound driver for Dell Inspiron 1420 loaded with Windows 7 OS.
View 1 Replies View Relateddr sir my inspiron 6000 audio not working
View 2 Replies View Relatedso i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedI have just built my first pc, and I am stuck at installing windows 7 . Here's what happens, I am trying to install off a USB stick as I don't have a dvd drive for this build. It will load into the setup and it'll stop on a screen requiring me to load drivers.
Here is what it displays:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now".
So I found drivers for my mobo Asus M5A97, I select them and then after I click next this message appears: "No new devices could be found. Make sure the driver files are correct and located on the driver installation media".
I don't know what to do! I've tried all I can think of!! Nothing seems to work! I am trying to install windows 7 Ultimate 64 bit, I've tried installing windows vista 32 bit, and its been saying the same thing as well! I found the drivers here: [URL].