BIOS Disk Error - Resetting Boot Priority To Correct Drive?
Jan 27, 2012
When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
I'm currently running Windows 7 Home Premium 64 Bit. I have two hard drives in this PC. One is an Intel SSD (on which my Windows 7 is installed and is the active partition), and a 1TB hard drive. This computer has been up and running for 1 1/2 years now without any issue.
Yesterday I updated Norton and ran its Registry Cleaner and might have started this problem.
So the problem is when I boot my computer, every thing is normal until before the Windows 7 logo screen. Prior to today, it just goes there without any issue. But today, I received an error: "CD ROM Boot Priority Error - No medium". I have an Asus motherboard, and it has the F8 option to select boot device. So I reboot my computer, hit F8 and select my SSD, and Windows 7 is able to boot correctly and without any issue. Then I check my BIOS to make sure the boot order is correct and it's set to
1-SSD 2-HD 3-CD Rom
But everytime it would display me that error. Yes, I have a workaround by pressing F8 during POST and I'm able to boot to Windows 7. But I'd like to get rid of this error. I ran the Intel diagnostic software on my SSD and the drive is okay and healthy according to it.
After problem with my pc, I had reset my Bios.Now my pc starts very slow and I've lost my Bios-configuration, does somebody how I can get my old configuration back?
I managed to crash my mothers Acer Aspire one recently,while trying to rid it of a previous windows 7 crack it had,I ran WATFIX and now I need to manualy reset the bios the guide on yuo tube is a bit vague
I updated the bios on my Toshiba laptop from ver. 3.4 to ver 3.5. The registry does not reflect the change and still shows 3.4. Can the registry be altered to show the correct version?
I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
Originally I had a small solid-state hard drive on this set up. I added a non-solid-state hard drive later. Recently, my solid-state drive, the C Dr., became too full to upgrade certain software programs such as Dragon NaturallySpeaking. I purchased a second solid-state hard drive.I "mirrored" that second solid-state hard drive. To make sure that Windows was operating appropriately, I rebooted and hit F10. I then showed the new solid-state hard drive. Everything booted perfectly and the new solid-state hard drive was noted as the C Dr.When I rebooted into bios to change the hard drive boot order so that the new second solid-state hard drive would be the first in the priority, when I highlighted it and exited from it,it still showed the original solid-state hard drive as the first hard drive.I have never had this problem before. I now have to go into F10 every time I boot into my computer and highlight the new solid-state hard drive.
I recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.
I have a wireless adapter in my desktop that connects by default on start up. I moved my PC somewhere I can run a cable from the router directly. Now my question is how do I make the Ethernet connection the default /start up connection, besides just taking the wireless adapter out of the pc.
This morning I powered up my PC and got this error, 1234F:
Tried pressing 1 and nothing happened. Restarted and tried to get into the BIOS by pressing DEL, but the BIOS wouldn't load. Opened up the computer and unplugged all my hard drives and unneeded USB devices. Got into the BIOS fine after that. Powered down and reconnected the boot drive and everything booted up fine. Ran a quick test on the hard rive using the Seagate Seatools utility and it passed. Reconnected the other drives and again, everything checked out fine. I hope to run longer tests on my drives later this morning just to make sure.
I did have a Ubuntu live usb stick plugged in, but I have this plugged in often and have never had a problem. Tried recreating the problem by reconnecting everything and restarting but everything booted up fine.
The only things I have done to the PC is swap out two internal hard drives two days ago. I also have been having problems with my USB ports which I haven't figured out yet, this will probably be the subject of another thread!
So everything seems to be running fine now but I am a little worried about what might have caused my problem and if it is an indication of another problem? Is there anything I need to check?
Windows 7 SP1 Intel Core i7 930 12gb Ram Asus p6t deluxe v2 motherboard Nvidia GTX-260 XFX 650w PSU
After flashing the bios, my computer could not find the OS. The options displayed recommended that I try to repair the OS, so I made that selection with no joy. I went into the bios setup and found that it was no longer setup for my raid 1 drives, so reconfigured. When I did this, I missed setting the SATA 4/5 to IDE and went through the process again of trying to repair the OS. Once again, that did not work.
I went back into the bios and discovered my oversight, fixed it, but the computer still does not recognize my raid drives. The raid bios setup utility still shows a valid array. At this point, my assumption is that it doesn't recognize the array drive because the driver isn't loading, so I've tried to reload the drivers. The motherboard manual only describes how to do this when installing a new operating system and I do not want to lose my programs. Do you have any suggestions?
HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly).Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?
HPE-400f Pavilion has been crashing to black screen with cursor with problems booting windows 7. Was getting BIOHD4 error code, then BIOHD3 -- Warning: No Active Partition. Installed 2 spare hard drives to alleviate crowding but problem continues. In troubleshooting have noticed the boot-up priority order keeps changing, so that the HDD group is not first, and also so the main - OS C: - hard drive is not on top of the list. Correcting these problems allows windows to boot up just fine, but then random crashes or bootup failures continue (constantly). Have taken everything out and reconnected, done a clean install from HP disks (reformatting and wiping the HD), system repair, virus scans, etc., yet problem continues. How can I fix the boot-up routines so the computer keeps them as they should be and doesn't keep rearranging them on its own thereby causing Windows to hang up?
Right before a fresh install of Windows 7, I go into the BIOS and set the boot priority to boot from the CD first. So at what point during, or after, the installation do I go back into the BIOS and set the boot priority to boot from the Hard Drive?
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
i mounted my windows 7 iso with daemon, opened my cmd/disk part window and cleaned, partitioned, formated, and assigned the drive letter and then xcopied my mount to the flash drive, but it wont show up during boot up. i've done this a million times and its worked with this computer. im using the poopy mobo out of the a6430f hp computer. its an asus mobo.
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
I've messed up the security settings on one of my drives such that I can't encrypt any file or folder on that drive.
I get a message saying "you will need to provide administrator permission". This is even though I am the administrator and I have ownership and control of the drive and the folders and files on it. Weird, right?
Is there any way to reset the permission on a drive short of formatting it?
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
For some time i was having an issue with my pc when I'd restart or Reboot it would do the Compaq screen the go to a black screen with a flashing | and I'd have to use CTRL+ALT+DEL then hit ESC on the Compaq screen to enter boot menu and manually select my Hard Drive. One day I was uninstalling unused programs on my pc to free up memory and one of them was Windows Essentials after I was done uninstalling all I wanted gone I rebooted and the problem did not persist.Now I do not claim that Windows Essentials was the cause but I just barely reinstalled it to get Windows Movie Maker back and I had to reboot after installation and now I get Disk I/O error Please reinsert the disk and try again, or something like that, and have to do the boot menu trick again.
The Ultimate Boot CD and booted it up on my RAM and saw that my original half of the harddrive was still in perfect form. So I installed Linux, hoping to fix the booting problem. I successfully got Linux on the partition which originally failed, but now I get this boot screen option,Is there some way to correct my computers boot to either have the original boot where I can select either partition to boot from with EasyBCD or just deactivate Linux as long as the computer boots directly to my Windows 7 and I don't get the original error.
I've reached the last straw with my attempts to install windows 7 64 bit onto my PC the story goes as this;
I needed to upgrade from windows XP 32bit to Windows 7 64bit however when I installed my first Windows 7 package I didnt realise but it was infact 32bit so to my annoyance I reformatted back to XP 32bit, (I need 64bit to run several things on my computer such as high end games) in the mean time my family told me they wanted windows 7 on their PC, so using their PC I created a USB boot disk and used it on my bare-bones PC (The one I'd recently reset to XP), this brought up my first Disk Read Error.
Annoyed I tried a few different ways of making a USB boot only to always be brought to the same error, deciding to do the family PC first I used the same boot which had brought up an error on MY PC in my families PC and it worked like a charm. Not a single issue and Windows 7 64bit was installed within the hour. USing this new platform I created a -new- USB boot disk thinking that if I made a 64bit boot off a 64bit system it would have more luck ... No it didnt.
I've tried all sorts of BIOS options but every time it just brings up the same error, I attempt to change the 64bit bootsect.exe to a 32bit one and it didnt bring up the error but then told me files were corrupt. I have unfortunatly only got one ... long ... answer left.
I install windows 32bit again, then use that platform to clean install 64bit windows7 but I doubt that'll work.
For the record I KNOW I cannot upgrade from 32 to 64, I WANT to do a CLEAN INSTALL!