Could Not Get The Correct Boot Up Fix
Oct 22, 2010
The Ultimate Boot CD and booted it up on my RAM and saw that my original half of the harddrive was still in perfect form. So I installed Linux, hoping to fix the booting problem. I successfully got Linux on the partition which originally failed, but now I get this boot screen option,Is there some way to correct my computers boot to either have the original boot where I can select either partition to boot from with EasyBCD or just deactivate Linux as long as the computer boots directly to my Windows 7 and I don't get the original error.
View 3 Replies
ADVERTISEMENT
Oct 20, 2012
I am just checking before I do it if the steps are correct.
Q: Why am I doing this?
A: I have both retail versions of Windows 7 x32 and x64 and need to install both on one HDD, I have two unique keys also. This is used for my work machine for software testing.
I have a single SATA 250GB HDD which is a new HDD, completely un-used.
The steps I think are correct are as follows;
* Insert Windows 7 x32 into drive and proceed with setup.
* Click advanced drive options and click New, create the first partition 50% of my full HDD space.
* Click New and create the 2nd partition with the same size as previous.
* Install Windows onto Partition 1 as normal.
* Insert Windows 7 x64 into drive and proceed with setup.
* Install Windows 7 onto Partition 2 as normal.
Use the unique license key for each install, cannot use the same key for both.
Both operating systems are now installed and can be chosen on boot, each has the same available size.
One question I am wondering is does this process create 2 System Partitions for recovery files like it does when doing a single install? If so do I need to incorporate the 200MB size allocated when I am choosing each partition size?
I know this can also be done via disk management after one is installed then shrinking the volume by a max of 50% but I want to know the clean install route as mentioned above.
View 2 Replies
View Related
Mar 3, 2012
Have a netbook with Windows 7 Starter. It dualboots with Linux. My plan is to remove the Linux partition to make space on the hard disk. Obviously then the boot information, which is a GRUB, should be corrected. How can you edit this ahead of time, to allow a boot with a single entry? A netbook has no disk drive, so there is no repair disk available.
View 6 Replies
View Related
Jan 19, 2012
Windows 7 on Novell Network. On boot up the Novell Logon screen comes up first and Username is correct and then Password is entered. The next screen is the Windows 7 Logon. The username is incorrect and no password is used. The correct username must be typed in.How do I get the correct username in the Windows 7 Logon on boot up of machine? On my XP machines the NWGINA.dll handles this procedure. What handles the boot up in Windows 7 and how do you put in the defaults?
View 2 Replies
View Related
Jan 27, 2012
When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
View 2 Replies
View Related
Sep 10, 2009
can some one tell me why in everest ultimate edition and in Bios aslo (ram is showing only 1066 Mhz but i have Corsair 6GB 1333Mhz)....
but here intel says 1066 Mhz is default value....... ( Processors - Frequently asked questions )
so i want to know that how to increase Ram's Mhz to 1333Mhz..!!!
please post any screenshot or any link with screenshots if possible...
View 9 Replies
View Related
Aug 10, 2011
I am trying to install my Kodak all-in-0ne printer but I can't seem to get the correct instructions.
View 2 Replies
View Related
Feb 3, 2011
I have just got a new HP laptop with Windows 7 and have got it set up the way I want it, apart from the above problem - I either have icons with arrows and the big blue letter e or the blue and green globe icons. If, for instance, I add a shortcut to Facebook, I would expect to see the Facebook icon(white f on blue backgeound), but I don't, I get one of the above. I have tried right clicking and going to properties and then change icon but the icons I need are not there.
View 2 Replies
View Related
Jan 3, 2012
the one that displays on the lower task bar, right hand side, and see if it (now) displays the correct GMT (same as UTC) ? Since the start of the New Year, mine displays the wrong GMT, even though I'm pretty sure it is all set up correctly. Can't seem to get it to display correctly.
It used to.
View 1 Replies
View Related
Nov 12, 2012
I have 3 hitachi drives that came out of a IBM storage array, they are being re-purposed for another project. Only problem is when I hook them up to my windows 7 machine via sata connectors they are only displaying 372gb of usable space, these drives are 750gb. In disk management the drives only display the 372gb volume. How can I reset the partition size on these drives?
View 5 Replies
View Related
Jan 1, 2011
I've a Core i3 processor on Intel DH55TC Mother board with HD graphics. The system is new and I've installed Windows 7 with drivers provided with Intel Motherboard. But once I installed the graphics driver my monitor shows lot of dots on screen. I've LG 16" Screen LCD Monitor. If I uninstall the graphic driver, the dots will go but the correct resolution for my monitor is not available.
View 9 Replies
View Related
Jun 13, 2011
I have 3 hdd. All of them are sata and i can see the corect order showed in BIOS
View 5 Replies
View Related
Jun 13, 2012
Looking at Device Manager, I have the following two items with that yellow "!" mark. Might any tell me how significant these are, and what they exactly pertain to ? How do I correct ? Should I bother ?
View 1 Replies
View Related
Apr 17, 2011
when i right click to correct the spellings the firct letter always be capital
View 1 Replies
View Related
May 21, 2011
As we all know today's all advance games require dx 10 or more, as recent games are not likely to run on xp any more, i just wanted to know that will it slow down my PC or it will be same as before on xp relative to games of 2010 to 2011. Also will win 7 be same as trouble making as vista.
View 4 Replies
View Related
Mar 12, 2012
i am having this problem with my keyboard. when I press Shift/2 (" ) is typed, it should be (@) and vice versa. how to rectify this error?
View 2 Replies
View Related
Apr 17, 2012
keyboard keys are not correct. When i press L (3) is typed, it should be LWhen i press shift/0 ( / ) is typed it should be )
View 3 Replies
View Related
Aug 9, 2012
My screen is sideways. How do I correct it?
View 4 Replies
View Related
Aug 23, 2012
how to correct the error 0x 80070002
View 8 Replies
View Related
Dec 23, 2011
A while ago, I had a triple boot system, but now, I'm using one of the hard drives for something else, so now it is only dual-boot. However, for some reason, I cannot get Windows 7 to see the new boot file.I constructed the original boot system with EasyBCD. Absolutely no problems whatsoever. When I started up the software to make the dual-boot system, it said it couldn't find my boot files. So, I constructed the dual-boot system, and I wrote it on the drive. However, when I start up the computer, I still see the old triple boot menu. I tried clearing it with the Windows 7 restore disk, but it doesn't see Windows 7 on the hard drive.
View 9 Replies
View Related
Jul 18, 2012
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies
View Related
Oct 27, 2009
My Windows 7 64 bit gives me "not responding" every few minutes. It is not a hardware problem because this VelociRaptor had on XP Pro for years and the Vertex is still running XP.seriously suspect it is a memory problem because early in the morning it will go for about 30 minutes before the first crash and then it gets progressively worse until every 20 or 30 seconds it gives "not responding" which always corrects itself (after the screen goes pale) and then you hear a lot of hard drive activity.There are no processes using excessive CPU or memory when this happens. This is a downloaded version and I built the ISO and upgraded XP. I have tried another upgrade DVD but that crashes during install.
View 9 Replies
View Related
Aug 19, 2009
In vista i used to go into safe mode , add remove nvidia drivers and reboot into normal mode it would install the standard vga drivers. However with windows 7 when you reboot into normal mode it installs these wddm(?) drivers and reboots.
Have the old nvidia drivers been uninstalled? and can i just install any previous beta's or new betas over the top?
EDIT : Just installed over the top of the default windows 7 nvidia drivers on uninstalled reboot, seems to work fine so i'll see how it goes!.
View 1 Replies
View Related
Aug 15, 2012
Wasn't sure how to classify what's happening but I recently installed Win 7 Ultimate 64 bit. It ran alright for a few days but over the last 2 days, I've been getting a flickering type problem. Now whatever is causing this is also affecting my ability to click or tab items or right click an item. Ex: If I have task manager open and want to close it; I right click it in the task bar to click close but the minute I move to click close the menu disappears.
View 1 Replies
View Related
May 15, 2011
I install FolderMage Pro and lock a drive of my hard disk. now I give it the correct password but foldermage pro didn't accept the password nor uninstall. uninstalling require password. how I crack foldermage pro security or uninstall it to open my drive..
View 3 Replies
View Related
Nov 3, 2011
correct my sound properties/configuration? I have a Realtek HD Audio Manager and i need to put the music and my voice at the same time.
View 1 Replies
View Related
Sep 7, 2010
send the correct bios settings of windows 7.
View 4 Replies
View Related
Apr 8, 2011
Is there something I can adjust to correct this? I have a brand new acer net book that I purchased yesterday and had this problem the minute I used it. I would like to make all aware that I am a kitchen and bath replacement specialist and an excellent tile setter since 1978 in the Phila. area
View 9 Replies
View Related
Nov 12, 2009
I am using an HP photosmart 1215 printer w/ HP 7200C driver. Printer is not printing. It was when I first installed it but not from internet. So, I started to fool with it and it quit. Might be the incorrect port because I changed port to USB port the changed it back to LPT! printer port. Now it won't print at all.
View 7 Replies
View Related
Sep 18, 2011
Dv 6736 correct driver no sound
View 1 Replies
View Related
Apr 12, 2012
hey there, hav this prob wit my drive cnt open it but can see it on screen dont wanna loose my data.
View 2 Replies
View Related
