Not Responding Gets Correct After The Screen Gets Pale
Oct 27, 2009
My Windows 7 64 bit gives me "not responding" every few minutes. It is not a hardware problem because this VelociRaptor had on XP Pro for years and the Vertex is still running XP.seriously suspect it is a memory problem because early in the morning it will go for about 30 minutes before the first crash and then it gets progressively worse until every 20 or 30 seconds it gives "not responding" which always corrects itself (after the screen goes pale) and then you hear a lot of hard drive activity.There are no processes using excessive CPU or memory when this happens. This is a downloaded version and I built the ISO and upgraded XP. I have tried another upgrade DVD but that crashes during install.
View 9 Replies
ADVERTISEMENT
Aug 9, 2012
My screen is sideways. How do I correct it?
View 4 Replies
View Related
Feb 5, 2013
I have Windows 7 64bit and use pale moon 15.2.1 as my main browser.When I compose an email in hotmail and paste a link,it doesn't show as a link, just the link text, so my recipient cannot click on it to go to the link.If I use IE9 it works, in older versions of pale moon it worked?
View 2 Replies
View Related
Jun 2, 2012
I am using an ASUS monitor model ML228, ATI Radeon HD 3300 Graphics, and Windows 7 32-bit. I have used this monitor before at the correct resolution of 1920x1080, but now it is not available to select from the screen resolution manager.
I read through a couple of other threads that said to uninstall and reinstall the driver from device manager for both my graphics card and the monitor and it says both are up to date and nothing changed.
Here is a screen shot of the screen resolution manager: [URL]
View 18 Replies
View Related
Apr 30, 2012
A photo editing programme that was fine in XP has overlapping instruction bars and small pale text in some areas to the point of being illegible. I've just down loaded another one and it is similar. Could this be some sort of formatting problem? XL customer files were really bad but I finally got on top of that by formatting.
View 15 Replies
View Related
Aug 29, 2012
My computer loads normally to the login screen. I enter my password and press enter.It displays the welcome message with the spinning circle thing, and seems to load correctly. When finished, it is at this point my screen goes black showing only the cursor which I can move. When I hover over where the taskbar should be, the screen dims a bit. When I move away from the 'invisible' taskbar, the screen brightens to it's original state. This leads me to believe that the desktop may be loaded, but for some reason is not displaying. After about a minute, everything displays and the computer works perfectly. Occasionally, there is not an issue, and the desktop loads perfectly, seconds after logging in.
View 5 Replies
View Related
Jan 24, 2012
Recently I built a computer but shortly after I began using it the screen would go black and stop responding to anything, I couldn't even power it down from the on/off button, I had to shut it down from the switch on the battery and sometimes that fail before working.
View 5 Replies
View Related
Oct 2, 2012
when i playing games , suddenly the screen appear random color square and the nvidia it's not responding , i try to play the game again after the nvidia it's recovered from the not responding and the games it's play normal again, the question i want ask, it's that mean my VGA already broken / damaged?
View 1 Replies
View Related
Mar 16, 2012
I was using a program called NoLimits and Google Chrome on my Windows 7 computer. After about 30 minutes or so, all the programs was not responding.
After about 5 minutes or so, the screen shook and lines were on it. After that, I got the Blue Screen Of Death.
I restarted the computer. After the dell logo and below your computer type (Inspiron, Inspiron One etc), (before you see the Windows Error Recovery screen) I got an error message that said "A disk read error occurred. Press Ctrl+Alt+Del to reRECOVERY."
When I press Ctrl, Alt and Delete, The computer restarts and I get the same error message. Then, I have to shut down the computer and leave it off for at least an hour.
After an hour, I turned on the computer and I did not get the error message. After I logged in, I scanned for viruses, spyware and malware with the latest versions of all my antivirus programs and no was found. I tried everything I could do and none of them worked. I am posting this thread on my iMac computer with Mac OS X Snow Leopard 10.6.7.
View 3 Replies
View Related
Mar 4, 2012
All of a sudden my screen was black. my background , wallpaper are gone.I can change it to a different but I can't get my old background back. When I try to reset them , it goes black. I didn't do anything to it that I can think of.
View 4 Replies
View Related
Oct 15, 2012
I'm facing unexpected shutdown( blue screen error) so many times and my system going not responding so many time. Gaming is smooth (hd 7750) but sometime game stuck for 2-5 minute. I've to format my system windows drive every week.. backup doesn't work and now when I try to shutdown it's not going shutdown. It just shows that it is shut downing but even after the 1 hour it doesn't..
My system spec (3 year old):
Windows 7 32bit,
Intel c2d e7500 2.93ghz,
2gb ram ddr2,
Intel dg41rq mb,
Odyssey 450w psu 14a on 12v rail,
ATI hd7750 graphics.
WD Wavier blue 320 GB hdd 8mb cache
View 3 Replies
View Related
Oct 22, 2010
The Ultimate Boot CD and booted it up on my RAM and saw that my original half of the harddrive was still in perfect form. So I installed Linux, hoping to fix the booting problem. I successfully got Linux on the partition which originally failed, but now I get this boot screen option,Is there some way to correct my computers boot to either have the original boot where I can select either partition to boot from with EasyBCD or just deactivate Linux as long as the computer boots directly to my Windows 7 and I don't get the original error.
View 3 Replies
View Related
Sep 10, 2009
can some one tell me why in everest ultimate edition and in Bios aslo (ram is showing only 1066 Mhz but i have Corsair 6GB 1333Mhz)....
but here intel says 1066 Mhz is default value....... ( Processors - Frequently asked questions )
so i want to know that how to increase Ram's Mhz to 1333Mhz..!!!
please post any screenshot or any link with screenshots if possible...
View 9 Replies
View Related
Aug 10, 2011
I am trying to install my Kodak all-in-0ne printer but I can't seem to get the correct instructions.
View 2 Replies
View Related
Feb 3, 2011
I have just got a new HP laptop with Windows 7 and have got it set up the way I want it, apart from the above problem - I either have icons with arrows and the big blue letter e or the blue and green globe icons. If, for instance, I add a shortcut to Facebook, I would expect to see the Facebook icon(white f on blue backgeound), but I don't, I get one of the above. I have tried right clicking and going to properties and then change icon but the icons I need are not there.
View 2 Replies
View Related
Jan 3, 2012
the one that displays on the lower task bar, right hand side, and see if it (now) displays the correct GMT (same as UTC) ? Since the start of the New Year, mine displays the wrong GMT, even though I'm pretty sure it is all set up correctly. Can't seem to get it to display correctly.
It used to.
View 1 Replies
View Related
Nov 12, 2012
I have 3 hitachi drives that came out of a IBM storage array, they are being re-purposed for another project. Only problem is when I hook them up to my windows 7 machine via sata connectors they are only displaying 372gb of usable space, these drives are 750gb. In disk management the drives only display the 372gb volume. How can I reset the partition size on these drives?
View 5 Replies
View Related
Jan 1, 2011
I've a Core i3 processor on Intel DH55TC Mother board with HD graphics. The system is new and I've installed Windows 7 with drivers provided with Intel Motherboard. But once I installed the graphics driver my monitor shows lot of dots on screen. I've LG 16" Screen LCD Monitor. If I uninstall the graphic driver, the dots will go but the correct resolution for my monitor is not available.
View 9 Replies
View Related
Jun 13, 2011
I have 3 hdd. All of them are sata and i can see the corect order showed in BIOS
View 5 Replies
View Related
Jun 13, 2012
Looking at Device Manager, I have the following two items with that yellow "!" mark. Might any tell me how significant these are, and what they exactly pertain to ? How do I correct ? Should I bother ?
View 1 Replies
View Related
Apr 17, 2011
when i right click to correct the spellings the firct letter always be capital
View 1 Replies
View Related
May 21, 2011
As we all know today's all advance games require dx 10 or more, as recent games are not likely to run on xp any more, i just wanted to know that will it slow down my PC or it will be same as before on xp relative to games of 2010 to 2011. Also will win 7 be same as trouble making as vista.
View 4 Replies
View Related
Mar 12, 2012
i am having this problem with my keyboard. when I press Shift/2 (" ) is typed, it should be (@) and vice versa. how to rectify this error?
View 2 Replies
View Related
Apr 17, 2012
keyboard keys are not correct. When i press L (3) is typed, it should be LWhen i press shift/0 ( / ) is typed it should be )
View 3 Replies
View Related
Aug 23, 2012
how to correct the error 0x 80070002
View 8 Replies
View Related
Dec 23, 2011
A while ago, I had a triple boot system, but now, I'm using one of the hard drives for something else, so now it is only dual-boot. However, for some reason, I cannot get Windows 7 to see the new boot file.I constructed the original boot system with EasyBCD. Absolutely no problems whatsoever. When I started up the software to make the dual-boot system, it said it couldn't find my boot files. So, I constructed the dual-boot system, and I wrote it on the drive. However, when I start up the computer, I still see the old triple boot menu. I tried clearing it with the Windows 7 restore disk, but it doesn't see Windows 7 on the hard drive.
View 9 Replies
View Related
Jul 18, 2012
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies
View Related
Aug 19, 2009
In vista i used to go into safe mode , add remove nvidia drivers and reboot into normal mode it would install the standard vga drivers. However with windows 7 when you reboot into normal mode it installs these wddm(?) drivers and reboots.
Have the old nvidia drivers been uninstalled? and can i just install any previous beta's or new betas over the top?
EDIT : Just installed over the top of the default windows 7 nvidia drivers on uninstalled reboot, seems to work fine so i'll see how it goes!.
View 1 Replies
View Related
Aug 15, 2012
Wasn't sure how to classify what's happening but I recently installed Win 7 Ultimate 64 bit. It ran alright for a few days but over the last 2 days, I've been getting a flickering type problem. Now whatever is causing this is also affecting my ability to click or tab items or right click an item. Ex: If I have task manager open and want to close it; I right click it in the task bar to click close but the minute I move to click close the menu disappears.
View 1 Replies
View Related
May 15, 2011
I install FolderMage Pro and lock a drive of my hard disk. now I give it the correct password but foldermage pro didn't accept the password nor uninstall. uninstalling require password. how I crack foldermage pro security or uninstall it to open my drive..
View 3 Replies
View Related
Nov 3, 2011
correct my sound properties/configuration? I have a Realtek HD Audio Manager and i need to put the music and my voice at the same time.
View 1 Replies
View Related
