I have NVIDIA GTX 560,before I had ATI RADEON 3600 HD Series.
Problems started with ATI when I quited from game resolution changed so I needed to change it.
I found good resolution,but this happened few times and there is no good resolution. Everything looks to small or to big,to wide or to short (using different resolution does not help I try them all out with all possible modes (16:9,14:9) also changing cable does not helps)
After few weeks I got HDMI cabel.Resolution was good everything was OK as it should but now is another problem. Everything looks like it is in set on low quality and its blurry to.
I dont know what to do because I try all possible modes on HDMI to overscan off/on 16:9,14:9 changing settings in nvidia control panel... No way to get it work.
Also I have 21,6 inch LCD tv with default resolution 1360x768 I dont know does this helps but my TV is recognized as Generic non-PvP monitor.
nyway, yesterday the date in the system tray randomly stopped appearing. It still shows the time, just not the date. I didn't change any settings or anything like that, I just remember looking down and noticing it was gone. I've looked in the date's settings and it still knows the correct date, it just will not put it on the task bar.I've looked on google to find people having similar problems, but nobody with a solution. I've tried restarting the computer as well, to no avail.
The Ultimate Boot CD and booted it up on my RAM and saw that my original half of the harddrive was still in perfect form. So I installed Linux, hoping to fix the booting problem. I successfully got Linux on the partition which originally failed, but now I get this boot screen option,Is there some way to correct my computers boot to either have the original boot where I can select either partition to boot from with EasyBCD or just deactivate Linux as long as the computer boots directly to my Windows 7 and I don't get the original error.
Certain websites such as eBay, Facebook & Hotmail are not loading correctly. Once I hit log in the page just shows as text to the left hand side of the screen. I have cleared all history, cookies & cache, I have restarted my computer, I have tried accessing them under a different windows PC user name, upgraded Mozilla, tried internet explorer, upgraded Java and made sure it was enabled.
I'm using Windows 7 Ultimate, the whole kit and caboodle.I setup my personal computer the exact same as my fathers, but for some reason, despite installing all the same updates and blah blah, I can't get the Japanese Kanji to display ON the computer Chrome displays them just fine, but my music is all boxes, rather than Kanji..Yes, I installed the Japanese Display Language, but when I go to swap to it, even IT shows as boxes, rather than Kanji..The same problem extends to Korean, Chinese (both), Russian and a few other packs.
There is a closed thread that describes my exact issue and what was discussed at [url]...
I was wondering if anyone knew of a resolution for this. It is for another computer and so i don't have immediate access to the specs but i can post them at a later time if it is deemed necessary. I just wanted to get the ball rolling at least for now
My display has suddenly decided to reduce it's size and doesn't any longer stretch to fill the monitor screen. There is a black border of about 1.5cm all round the desktop display. Using Windows 7 on a Dell All-inOne.
For some odd reason, about a month ago all gadgets in my win 7 ultimate stopped working correctly and now look like this when extended:Not even samples for the clock are displayed correctly anymore, instead I just get this red X-es.I've tried many things already, such as repairing windows for the dvd and so on but none have worked.
I know this computer can do it. I've done in Windows 7 and on Ubuntu before.
When I open screen resolution, the highest one displayed is 1600x1200. When I got to my adapter settings and click "List Modes" the highest one shown is 1920x1440, though when that one's clicked, my monitor says "mode not supported"..
I've tried using powerstrip. But when i get to the part where you install the driver, it won't let me install it. i click it over and over and over again, but nothing happens.. no error message or anything, it just won't go...
I've been trying to get this to work for hours. I have some embedded graphics intel chip thing.. i couldn't find an exact name anywhere..
I have a user that says her desktop randomly pops up while she is typing. She also says that sometimes when she walks away from her desk and comes back the desktop is displayed. She shakes the mouse to bring the last active window back each time. I changed out her keyboard thinking that there is something going on with the Windows+D Keys but the problem still occurs.
i have ASUS K42JP, with AMD Radeon HD 6570M (2GB).this is Performance info, in system rating window which says directX version is 10 and here is dxdiag which says its version is 11
my question is which one do i believe? here's the display page of dxdiag, which shows memory of 1702MB, in 64-bit, while once i put 32-bit in it and it became about 3500MB, how do i increase it? i mean it should display the shared system memory which is 3765MB.i have installed the graphics display .
I have seen a couple dual monitor problems on this forum, but no solutions for my issue. I have Windows 7 32 with dual 4850 cards and CCC installed with Crossfire configured. I am using 2 20" LCD monitors, my primary works fine. Windows detects my second 20" monitor and I have set the resolution and that it should extend my desktop but there is no display.
When windows is loading both monitors display the Windows 7 splash page so I know the signal is getting there. Also I have tried resetting the drivers, uninstalling them, etc. At no point have I been able to get windows to display on both monitors. Any ideas?
My computers motherboard fried a few weeks ago, so I fished out an old laptop and restored the OS to factory settings with a restore disk I created. My goal was to just use this laptop until I repaired my new one. (had to clean install windows seven because a prior failure which led me to getting a new one in the first place) After sucessfull reinstalation of windows on my old one, I popped out my hard drive on my new laptop, placed it in a portable usb case and plugged it into my ,now working one. My old laptop "recognised" the drive but will not display it in the computer browser window. it displays it in device manager with no errors, but i just cannot access the drive. I noticed in the disk management window, it is also displayed but does not recognize any file system for the drive (what should be a NTFS file system). I need to access some files on this HD and do not want to mess with the partition or file system on this drive because I want to keep this drive "in tact" for when I get a new motherboard for my new computer. How do i go about accessing this drive from my USB without risk of loosing the "structially fine" data already on it?
I have Dell laptop which having Xp sp3 already in C drive. I tried to install windows 7 on D partition which is again a primary partition.
Installation goes fine. and i have scene windwos 7 bootloader in the mid of installation of windows 7 . after successfull installation it restart my system and then windows 7 boot loader option is not displayed althorugh it displays the Xp bootloader instead of windows 7 bootloader. So now i m not able to load windows 7 although it is installed successfully.
Some application icons and files that are use them to open aren't displaying their proper icon and are displaying a default windows icon.
This is happening in the taskbar, the desktop and the start menu. I've tried deleting the iconcache.db file which didn't work.I've attached some photos illustrating the problem.
I have just got a new HP laptop with Windows 7 and have got it set up the way I want it, apart from the above problem - I either have icons with arrows and the big blue letter e or the blue and green globe icons. If, for instance, I add a shortcut to Facebook, I would expect to see the Facebook icon(white f on blue backgeound), but I don't, I get one of the above. I have tried right clicking and going to properties and then change icon but the icons I need are not there.
the one that displays on the lower task bar, right hand side, and see if it (now) displays the correct GMT (same as UTC) ? Since the start of the New Year, mine displays the wrong GMT, even though I'm pretty sure it is all set up correctly. Can't seem to get it to display correctly. It used to.
I have 3 hitachi drives that came out of a IBM storage array, they are being re-purposed for another project. Only problem is when I hook them up to my windows 7 machine via sata connectors they are only displaying 372gb of usable space, these drives are 750gb. In disk management the drives only display the 372gb volume. How can I reset the partition size on these drives?
I've a Core i3 processor on Intel DH55TC Mother board with HD graphics. The system is new and I've installed Windows 7 with drivers provided with Intel Motherboard. But once I installed the graphics driver my monitor shows lot of dots on screen. I've LG 16" Screen LCD Monitor. If I uninstall the graphic driver, the dots will go but the correct resolution for my monitor is not available.
Looking at Device Manager, I have the following two items with that yellow "!" mark. Might any tell me how significant these are, and what they exactly pertain to ? How do I correct ? Should I bother ?