I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
Do I need any special to set up three monitors for gaming in Win7?
View 2 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
i use a triple-head configuration with my center monitor specified as primary display. i have made some 3x Wide screen wallpapers, and i set them as the desktop backgrounds. it works fine with one caveat:
the images left most border starts on the center display --the image is triple wide, but the right-most third wraps around the the left display.
any ideas on how to properly center the image? i need the center display to be the primary as certain applications throw a fit when they are run on a non-primary channel.
I have been having a problem with trying to get Multi-Monitor resolutions set up. On XP my monitor setup is capable of 3360 x 1050; with 7 it automatically separates them and sets each resolution to 1680 x 1050, I would like to enable Span-extended desktop and have had no luck, CCC on XP allows this and on 7 the option simply isn't there. I was just wondering if I was overlooking something.
View 4 Replies View RelatedAnyone found a working all in one system monitor gadget?
View 5 Replies View RelatedAny suggestions to deal with multiple monitors in Windows 7? I was using UltraMon in Vista and really liked what it did. With all the changes to the taskbar in 7, UltraMon has lots of issues.
Is there anything new in 7 dealing with the taskbar (across multiple monitors)?
I have a setup with three monitors using the one in the middle as the primary one. It seems that I can't place icons in the lowest row of the primary monitor, as they will snap and jump to the row above it. If there is another icon above it, this icons kinda gets in the way and prevents the problem from occuring. It works fine on my other monitors as there is no taskbar there. For some reason, this behavior only occurs when there is a monitor to the left of the primary one, and I've noticed the same thing in Windows XP. The system seems to adjust the bottom of the icon space to work with the leftmost monitor. Is there any way I can fix this? Adjusting icon spacing won't help. Also, is there any tool to backup and restore my icon layout that works in Windows 7 and not just XP? It gets messed up when i switch from extended desktop to AMD Eyefinity mode and vice versa.
View 1 Replies View RelatedI read recently that upon release, windows 7 will have multi-monitor taskbar support, which I'm very excited about. Is anyone able to confirm this, as it seems that they were already shipping Windows 7 when this news emerged.
If I can pin programs to one monitor or the other, and have 2 "show desktop" buttons, then I'll be a very happy man.
I have two monitors on my system (win 7) and from time to time the main monitor gets turned down in brightness. The other monitor is just find but something ( a virus, malware or program) is turning the brightness down for no reason. I have run malware and virus protection and found nothing.. Sometime is will be in the middle of a session and other times it will be on boot. It's not the monitor I'm sure (turning it on and off does not work) and it's always the same monitor that is effected.
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 4
RAM: 3583 Mb
Graphics Card: NVIDIA GeForce 9800 GT , 512 Mb
Hard Drives: C: Total - 953867 MB, Free - 492460 MB; D: Total - 476937 MB, Free - 252870 MB; E: Total - 305242 MB, Free - 36973 MB;
Motherboard: ASUSTeK Computer INC., P5KPL-CM, x.xx, MS1C94BACF02445
Antivirus: Avanquest SystemSuite, Updated and Enabled
I have a project I'm doing where I have up to 5 monitors. I have a video that I want to play, but I want it to be FULL SCREEN and stretched to every screen.Is there a software that can do this? I know I could just pull the edges of the window to fit, but that will look tacky and is unacceptable.I know there are hardware solutions, but I would prefer software.
I am trying to restore an hp 2000-363NR notebook but I also have only 1/4 of my monitor viewable due to damage. The restore needs to be done on the main monitor because in that mode my external monitor doesn't display anything (unless Windows is booted).
View 1 Replies View RelatedI just accidentally changed my settings on my grapics card so that I can no longer see my desktop on the monitor connected to my HTPC. My HTPC has a monitor attached to it and it also has an HDMI out from the graphics card going to an LED TV in another room. I accidentally switched it so that the desktop can only be seen on the other TV in the other room.
All I can see on the monitor is the blank Windows 7 logo (no desktop icons) and I cannot navigate back to my AMD control page to undo this. I tried rebooting but this does not work. This is an issue as I don't have a bluetooth keyboard/mouse that I can use in the other room to control the desktop. How do I reset this? I am using a AMD HD 6750 graphics card.
I have an ASUS P6T SE motherboard with an NVIDIA GeForce GT 240 graphics card (512MB) already installed. I would like to connect 3 monitors to my PC but apparently the card only supports two concurrent ones.I use my PC mainly for web design and development, plus recreation such as watching movies, however I don't use it for gaming.Monitor sizes and inputs they support
17 inch: VGA
24 inch monitor: HDMI/VGA
23 inch: DVI/VGA
What is the best option for me to add the 3rd monitor? My main consideration is price, I don't want to spend too much money just for adding another monitor to my setup. My PC runs pretty quietly now and I want it to remain like that, so noisy cards are a big no for me. I've read about USB to DVI adapters but it seems they are not so powerful as proper graphics cards. The other option would be to add another card to my existing one, something basic that can run my third monitor. I'm not sure if this is at all possible, and what cards you suggest.And the 3rd option would be to take out my card and replace it with an ATI card that supports 3 outputs out of the box.
i have:
Windows XP pro (32 bit)
nVida GeForce FX 5200 has VGA;DVI;SVideo
ok heres what i did b4
i had 2 monitors one vga one and one dvi one and i hooked it up and i had i good dual monitor setup but when ever i loaded some programs the would give me a bsod screen and restart for example fsx dark basic and others that change resolution.
now....
i re installed nvida drivers and there updated (i think)
i have the DVI monitor hooked up right now with 1 display only
i have the desktop manager software enabled and running and the Nvida control pannel running.
and what i want to now is that i want to have a horizontal span setup (reason):
ok well i have seen that FSX can run on 2 monitors and that you can have a really cool display with both displaying images can i do this on a dual monitor setup or not or do i need to get a better card (preferably not)?
What to i do now?
ok so do i go to set up multipul monitors and do it that way or is there another way to do it better theres one last question, well i herd from a friend that in the display options like when you right click in the desktop then goto properties then settings. the friend said that there was an option to enable dual monitor support. before i had my setup i did not see that option and neither do i now im guessing that i don't have 2 monitors hooked up now.
I am obsessed about getting this to work so if i am making any of you people here mad i'm sorry and Thank-You for the help that you have given me recently, btw i got my processor to work and i got it hyperthreaded..
I have two monitors, and would like to setup a different wallpaper for each monitor while retaining the expanded screen option. How to go about that? I am using a Radeon 4770 HD if that helps.
View 9 Replies View RelatedI'm setting up Dual Monitors on my HIS Radeon 4870 1GB GPU. This GPU has 1 x VGA and 1 x DVI output. I have two identical ASUS VW222u monitors. I have installed the latest ATI Catalyst Suite and drivers for this GPU and have Windows 7 up and running with BOTH monitors.
My issue, however, is my primary monitor (DVI output) is running at my ideal resolution of 1680 x 1050, but my second monitor (VGA output) can not run at this resolution. It is only allowing me to choose from a small specific number of resolutions, and 1680 x 1050 is not included (closest is 1600 x 1200, IIRC).
The ATI Catalyst Control Centre is telling me the primary monitor is my ASUS VW222u (Digital), which is correct, but my 2nd monitor is only described as a "Generic Non-PnP CRT Monitor", despite installing the correct monitor drivers etc.
Is this because I am running this second monitor of the VGA output? Will that cause my monitor to not be able to produce my desired 1680 x 1050 resolution? And will running it off the VGA output mean It thinks its a CRT?
On my Windows 7 partition I am unable to use my laptop screen and my 27" LCD Samsung TV as a monitor simultaneously. This was not an issue on my XP partition. I have updated drivers on my video card to no avail.
My TV is connected via a VGA cable. If this cable is connected when I turn my computer on, it will display on the monitor only (but at a much lower resolution than my XP partition allowed) and I am unable to switch back to my laptop monitor without restarting. My display settings wont even recognize that both are connected. Any help would be greatly appreciated.
am trying to install windows on a laptop with broken screen it will not display on crt monitor when running setup.how would i change this. trying to either install vista or 7 hp dv9000 entertainment series
View 5 Replies View RelatedQuite often I find with games on a dual monitor setup is that Id find the cursor is on the other monitor and if I accidentally click there I lose focus of the game and some games wont tab back in.
Is there any way to prevent the cursor going outside the game in fullscreen?
I know some people have been asking questions concerning 3 monitors on Windows 7, but they don't answer the question for me (i think).
My system is an ASUS P7P55D-E Pro, Core i7-860 2.8Ghz and dual GeForce GTX 275 1.7 GB.
I've spent a good couple of hours to get this to work or reading up on it, but I just have a 3rd monitor sitting here.
I tried out Windows 8 for a while. Unfortunately, many of the video games I play crashed a lot, and well, to make a short story short, I have reinstalled Windows 7. One of the features I really liked in Windows 8 is that with a dual monitor set up, my desktop backgrounds not only rotated, but were not synchronized like in Windows 7. For instance, I could have a Battlefield 3 background on one, and a Company of Heroes background on the other... while on Windows 7, if I have Battlefield 3 on one, it will be the same thing on the other display. I can't seem to work out an option to have different "unsynchronized" desktops rotating..
View 1 Replies View RelatedIt may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
I have a AMD Radeon HD 6300 series adapter, running windows 7 x64.I have a dual monitor setup,the same monitor on each port an Acer S230hl. One port is an HDMI the other is a VGA. the issue i have is that when i have a worksheet open i can see the gridlines to the cells on the HDMI connected monitor, if i move the sheet over to the vga monitor the gridlines are so light i cannot make out the different cells. it looks like one clean sheet of white paper.i tried different contrast and brightness settings and no luck.
View 3 Replies View Relatedhow can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies View RelatedI have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View Related
