Excel Does Not Show Gridlines On Both Monitors In A Dual Monitor Setup
Jan 15, 2013
I have a AMD Radeon HD 6300 series adapter, running windows 7 x64.I have a dual monitor setup,the same monitor on each port an Acer S230hl. One port is an HDMI the other is a VGA. the issue i have is that when i have a worksheet open i can see the gridlines to the cells on the HDMI connected monitor, if i move the sheet over to the vga monitor the gridlines are so light i cannot make out the different cells. it looks like one clean sheet of white paper.i tried different contrast and brightness settings and no luck.
View 3 Replies
ADVERTISEMENT
May 31, 2012
As of right now I am running Windows XP Pro 64bit cause Windows 7 will not display dual monitors, I tried a combination of things and nothing... But xp shows them both with no problems and I didn't even have to install my driver for it! Windows 7 uli when I stall the driver cause i have the same disk that came with the video card what's the deal-le-o here
Running: on board video is Nvidia GeForce 6100 512mb
PCI card with dual vga ports and 1 S-Video port Nvidia GeForce FX 5200
Not sure if ram has anything to do with this but I have 3.25gb ram but both windows 7 and xp only show 2gb I'm thinking that might have to do with that 1.25gb are not of the same as the 2 1gb sticks.
View 5 Replies
View Related
Sep 7, 2009
I am having a issue setting up 2 monitors. I think maybe I cant run one through my graphic card and my VGA port on my motherboard at the same time.... Right now I am running my monitor through a nvidia 8400 gs but I thought I could run another on my VGA port on the motherboard also.
View 9 Replies
View Related
Jan 2, 2010
I have two monitors connected to the ATI Radeon HD 2600 XT graphics card (it has two DVI connections). With both monitors on everything works fine. Windows remembers which apps I have open on which monitor and so on.
However, sometimes I turn on only one (the primary) monitor. In this case Windows somehow still thinks that both monitors are there, so the apps which would open on the second monitor still do so, i.e. I can't see them when I start them, and the mouse goes easily beyond the active monitor.
Now, the second monitor is completely off - it has a real power switch. But it's possible that it still has some voltage through the connector so that Windows - or the graphic card - detects its presence. I have not tried to unplug it but maybe I should do that as well.
So finally my question - is it possible to make Windows aware that the second monitor is not in use and only extend the desktop when the second monitor is on and do that without restart/log off?
View 5 Replies
View Related
Jan 7, 2010
I don't know if I'm doing something wrong, but I have a wallpaper that is 3200x1200 resolution, and my two monitors are 1600x1200 each. The wallpaper will only mirror on both screens instead of half being on one screen and half being on the other... How can I get this to work properly?
View 1 Replies
View Related
Oct 6, 2010
certain programs always open on the 2nd monitor which i dont always have switched on. For example I double click the program to run and it always opens on the 2nd monitor even if I drag it to my main monitor it always defaults back to monitor 2. Also why when I run programs in full screen (games mainly) when I exit out the folders that were open are a difeerent size to what I set them at before running the game sometimes even the folder will move to the 2nd monitor upon exit.
View 2 Replies
View Related
Nov 30, 2012
I am trying to setup dual monitors will the graphics card support that function:
Intel(R) G33/G31 Express Chipset Family
View 4 Replies
View Related
Aug 14, 2012
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
View 2 Replies
View Related
Apr 16, 2012
My old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies
View Related
Sep 28, 2011
I have a Dell laptop on a docking station running Windows 7. Everyday I place it on the docking station and use my 20 inch monitor. Is it possible to activate the dual monitor feature and use the 20 inch as the primary and use the open laptop as the secondary monitor?
View 3 Replies
View Related
Dec 1, 2009
i have:
Windows XP pro (32 bit)
nVida GeForce FX 5200 has VGA;DVI;SVideo
ok heres what i did b4
i had 2 monitors one vga one and one dvi one and i hooked it up and i had i good dual monitor setup but when ever i loaded some programs the would give me a bsod screen and restart for example fsx dark basic and others that change resolution.
now....
i re installed nvida drivers and there updated (i think)
i have the DVI monitor hooked up right now with 1 display only
i have the desktop manager software enabled and running and the Nvida control pannel running.
and what i want to now is that i want to have a horizontal span setup (reason):
ok well i have seen that FSX can run on 2 monitors and that you can have a really cool display with both displaying images can i do this on a dual monitor setup or not or do i need to get a better card (preferably not)?
What to i do now?
ok so do i go to set up multipul monitors and do it that way or is there another way to do it better theres one last question, well i herd from a friend that in the display options like when you right click in the desktop then goto properties then settings. the friend said that there was an option to enable dual monitor support. before i had my setup i did not see that option and neither do i now im guessing that i don't have 2 monitors hooked up now.
I am obsessed about getting this to work so if i am making any of you people here mad i'm sorry and Thank-You for the help that you have given me recently, btw i got my processor to work and i got it hyperthreaded..
View 2 Replies
View Related
Aug 12, 2009
I have two monitors, and would like to setup a different wallpaper for each monitor while retaining the expanded screen option. How to go about that? I am using a Radeon 4770 HD if that helps.
View 9 Replies
View Related
Oct 27, 2009
I'm setting up Dual Monitors on my HIS Radeon 4870 1GB GPU. This GPU has 1 x VGA and 1 x DVI output. I have two identical ASUS VW222u monitors. I have installed the latest ATI Catalyst Suite and drivers for this GPU and have Windows 7 up and running with BOTH monitors.
My issue, however, is my primary monitor (DVI output) is running at my ideal resolution of 1680 x 1050, but my second monitor (VGA output) can not run at this resolution. It is only allowing me to choose from a small specific number of resolutions, and 1680 x 1050 is not included (closest is 1600 x 1200, IIRC).
The ATI Catalyst Control Centre is telling me the primary monitor is my ASUS VW222u (Digital), which is correct, but my 2nd monitor is only described as a "Generic Non-PnP CRT Monitor", despite installing the correct monitor drivers etc.
Is this because I am running this second monitor of the VGA output? Will that cause my monitor to not be able to produce my desired 1680 x 1050 resolution? And will running it off the VGA output mean It thinks its a CRT?
View 1 Replies
View Related
Apr 3, 2009
On my Windows 7 partition I am unable to use my laptop screen and my 27" LCD Samsung TV as a monitor simultaneously. This was not an issue on my XP partition. I have updated drivers on my video card to no avail.
My TV is connected via a VGA cable. If this cable is connected when I turn my computer on, it will display on the monitor only (but at a much lower resolution than my XP partition allowed) and I am unable to switch back to my laptop monitor without restarting. My display settings wont even recognize that both are connected. Any help would be greatly appreciated.
View 2 Replies
View Related
Dec 1, 2009
Quite often I find with games on a dual monitor setup is that Id find the cursor is on the other monitor and if I accidentally click there I lose focus of the game and some games wont tab back in.
Is there any way to prevent the cursor going outside the game in fullscreen?
View 2 Replies
View Related
Feb 1, 2010
I know some people have been asking questions concerning 3 monitors on Windows 7, but they don't answer the question for me (i think).
My system is an ASUS P7P55D-E Pro, Core i7-860 2.8Ghz and dual GeForce GTX 275 1.7 GB.
I've spent a good couple of hours to get this to work or reading up on it, but I just have a 3rd monitor sitting here.
View 2 Replies
View Related
Dec 24, 2012
I tried out Windows 8 for a while. Unfortunately, many of the video games I play crashed a lot, and well, to make a short story short, I have reinstalled Windows 7. One of the features I really liked in Windows 8 is that with a dual monitor set up, my desktop backgrounds not only rotated, but were not synchronized like in Windows 7. For instance, I could have a Battlefield 3 background on one, and a Company of Heroes background on the other... while on Windows 7, if I have Battlefield 3 on one, it will be the same thing on the other display. I can't seem to work out an option to have different "unsynchronized" desktops rotating..
View 1 Replies
View Related
Feb 27, 2012
how can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies
View Related
Jul 16, 2010
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
View Related
Apr 19, 2012
I would like to setup 2 monitors on my computer. I know my computer is older but it is very fast and I don't plan on using the monitors on resource hogging stuff
My specs are:
Intel pentium 4 3ghz HT ENABLED
4gb ram
1tb hdd
Nvidia gt 520 1gb
windows 7
My monitors are 2 different inputs / outputs
If I just plugged them both in to the plugin on my gpu would it work and have to adjust stuff? I have never used dual monitors so I don't know. One monitor has a 1600x900 (I plan on this being main monitor)
Other is 1024x768. One of them is dvi and other is vga.
View 9 Replies
View Related
Dec 31, 2011
Main monitor is 19" connected with DVI Cable
Second monitor is 40" lcd connected with HDMI Cable
I want to see my main desktop on 19" monitor and play games movies etc., on 40" lcd and I cant find how to make them independent. I can duplicate or extend them or I can attach up to 6 monitors with the eyefinity technology but 2 independent monitors like in the old times I can't?
View 1 Replies
View Related
Jul 8, 2012
So right now I recently got a duo monitor setup. Before I had my 2nd monitor be my TV for movie purposes. Now I have 2 actual monitors 2 19" 1440X900. So far I downloaded a program called DUo Monitor to basically adds a taskbar to my second monitor. Now I want a program to calibrate the brightness and color to be the same on both screens. I tried doing this manually but it's taking quite a bit and I am nowhere near. One is a Gateway other is a Dell.
View 6 Replies
View Related
Jul 26, 2012
I am using the system spec as shown in the signature. Both monitors are connected to a single ATI 6870HD. The Dell U2311H is connected to the card via minidisplay-display port while the LG M227WD is connected via the DVI cable. The problematic monitor is the monitor over the display port (Dell). The monitor goes black randomly, sometimes during I play games. Sometimes it goes black more than few seconds, and I get a message on the screen saying power down as there is no reception from the display port.
I have updated the latest drivers, but still this problem persists. A
View 2 Replies
View Related
Oct 26, 2009
I have dual monitors, one on my laptop and another bigger monitor for when I am docked and at the office.
Under XP I had it set so that when I closed the lid on my laptop, the lapto screen was shut off and all files that were subsequently opend were opened to the main big screen.
It appears now that when I close the lid the screen stays on and if there was a window showing on the laptop when the lid is closed it does not automatically switch to the big monitor. It used to under XP. Is there a way to duplicate this behavior in Windows 7?
There are times when I want to use just one monitor and shut the monitor built-in to the lap top - off. Is there an easy way to do so?
View 4 Replies
View Related
Feb 15, 2013
Win7 One PC Two Monitors One User Per Monitor but why?
View 1 Replies
View Related
Aug 16, 2010
1. Having two monitors in different rooms, means that the desktop/taskbar is on one screen or another.
2. People using the keyboard/mouse in one room will affect the user in the other room.
Is there any way to setup win7 to allow different profiles for each monitor? Essentially allowing two different users on the same computer at the same time?
View 9 Replies
View Related
Jun 4, 2009
I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
View 9 Replies
View Related
Jan 17, 2012
i am trying to run dual monitors on windows 7, i have only got pci slots on my asus mother board?
View 10 Replies
View Related
Apr 9, 2011
I just installed a 2nd video card. It's running perfectly fine, except now on my dual monitor setup, there is a virtual space between my monitors. (This space shows on the Windows "screen resolution" tab. Practically, it means that I have to move my mouse a lot more to get it onto the 2nd screen, rather than it just being right there. I can move the screen (on the screen resoltion tab) to be right next to the other screen. I'll press save/apply and then it just pops back to the same place it was with the gap still there. I've tried doing it in the nVidia control panel as well, with the same problem (pops back). By the way, even though I installed the 2nd card, both monitors are plugged into the SAME, OLD (previously working) video card.
View 10 Replies
View Related
Dec 21, 2009
i recently got a second 20" monitor. (both are samsung, 2 ms. very similar in specs).
and i noticed i can not use both of them in games. IE, the resolution in game wont go past 1680x 1050, which, by my understanding, is how u get it to span onto the second monitor. Any ideas? iv got an nVidia GTX260 running latest drivers. core i7 oced to 3.6.
View 5 Replies
View Related
Aug 29, 2011
im trying to set up dual monitors. Right now i have my main monitor as my LCD tv, and i have a vga splitter from my only vga port sending out two vga cables, one to my tv and the other to the monitor my computer came with. im trying to use the monitor it came with as my second monitor where i can do things on both, but its only cloned from my main one. when i go into control panel> appearance and personalization> display > display settings > detect , it will not find my second monitor. So do u need 2 vga ports for this to work? or is there anything i can download that would allow me to use the second monitor as its own and not a clone? this probably sounds really confusing so if i have to reword it i will, just trying to find out if im wasting my time by trying to do this
View 4 Replies
View Related