This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 RepliesI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
To wits end I am stumped after installing a new SSD HD today and clean install of Windows 7 Home Premium 32 bit OS.The problem I am having is that in device manager under Display Adapters it list Standard VGA Graphics Adapter. Also for Monitors it Lists Generic PnP Monitor.I have downloaded and updated the latest drivers for each hardware and a I am still getting the same result.This is frustrating since I could not image my old version of Windows 7 from a larger,slower HD to the new/faster SSD HD. Windows 7 imaging suggests that the new HD must be larger than the old HD in order to do an image restore.I have read this is not the case however found that in no way have I been able to successfully image restore my old OS from the larger HD to the new smaller SSD HD.
View 3 Replies View RelatedI recently aquired a Sansui SLED2453w monitor, and it ran fine for a little while, but now it's set to a resolution of 1280x1024, and is labeled as a "Generic Non-PnP Monitor". This resolution is OKAY, but it's the highest that Windows is allowing me to choose,without saying it's unsupported. I had it running on a above 1700 resolution when it worked. I've tried updating it's driver, "detecting" it, and a couple other methods.
View 6 Replies View RelatedAsus VE228T that I use as the main display on my left (and my laptop screen works as the secondary screen on the right). The resolution is 1920 x 1080, wasn't displaying anything and I went to the Screen Resolution properties and tried doing what I've always done if the screen hasn't been on, choosing "extend these displays", didn't work right as the laptop screen remained as the main one (usually the Asus has switched as the main display by itself) and the Asus did turn on BUT with my laptop's resolution.
View 1 Replies View Relatedive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES' anyway this doesnt seem to have made a difference. still no input through the hdmi.I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....just some general info that might be of use:
windows 7 x64
dual monitor setup
the graphics is integrated on the intel i5 chip my display adapters in device manager says Intel(R) HD Graphics Family.it has a dvi out, hdmi out, and vga out.
I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
okay so I am at work and whenever I want to maximize a window to fill the left side of the monitor, it for some reason maximizes and centers in between both the monitors. Does anyone know how to fix this? I know that probably didn't make much sense, but I attached a picture to show what I am talking about. I was trying to maximize this window by dragging clicking it at the top and dragging it all the way to the top to maximize, but it centers in the middle?
View 1 Replies View RelatedDual monitor is not working for me on my Windows 7 laptop. I assume this is related to some video drivers
View 1 Replies View RelatedWin7 dual monitor resolution resetting
View 1 Replies View RelatedI have been using dual monitors in windows 7 for at least a year or more. For a long time I had it set up with monitor two over monitor one, but now I have altered the physical layout to side by side and want the monitors to reflect this. I have changed it to being side by side in the appropriate windows settings location and in the NVIDIA control panel both, yet when I open a new program (whether it is a game, browser, or media player) it changes back to the old over/under set up. Is there some way I could lock it to the side by side?
View 9 Replies View RelatedI've got two nice little 1680 x 1050 20.1" Dell S-IPS monitors, which are de-facto 16:10 units, mounted on an Ergotron stand, with the intention of using one for television and the other for computing purp's.My Graphics card is a capable Palit HD4850 Sonic with dual DVI outputs. It's also got an S-Video output which isn't in use.What I would like to do is run WMC maximised on one monitor, with TV there as and when I wish to view anything, and naturally I wish to use this screen maximised (the only issue in WMC is that there is a limitation of either choosing 4:3 or 16:9 ratio output, and not 16:10).However when I connect both monitors vai DVI output Windows7 locks my cursor in the maximised TV screen and I then cannot control the primary PC monitor whatsoever - which is somewhat of a complete farce, and is an extremely dissappointing result!Accordingly I have to drag the WMC display to get the 16:9 output to 'almost' fill the 16:10 monitor, and then face the annoyance of the cursor drifting to that screen from my PC monitor from time to time (I can happily live with a band to allow for the 16:9 ~ 16:10 hardware differential... but not this ridiculous loss of cursor control!)Question is this... why does my cursor focus get restricted to one screen if the Windows Media Centre is maximised? The whole point of having dual-monitors is being able to use both of them at once of course.I've tried with the ATi driver alone, and with the Catalyst suite loaded, with no differences to the issue.My monitors also have an S-Video input, but I've not got an S-Video cable to hand right now - however... if I were to use S-Video for one monitor would I avoid the 'locked in cursor' problem?
View 9 Replies View Relatedi need a little help with Windows 7 duel monitoring,
im running Windows 7 on my laptop, and want to hook up a 2nd stand alone monitor to the left hand side of my laptop.
i hooked the monitor in correctly but my laptop doesnt notice that the 2nd screen is plugged in.
any idea's what could be the problem ?
it's possible to maintain a dual monitor, extended desktop configuration when moving a relatively large network from XP Professional to 7 Enterprise. As it stands now, after the Win 7 image finishes installing the secondary monitor does not automatically attach leaving the user to have to do so when they log on for the first time. We have seen cases where the second monitor does attach, but the primary monitor has switched.how to set the secondary monitor to attach at first logon essentially maintaining the former XP extended desktop configuration?
View 3 Replies View Relatedhow can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies View RelatedFriend has a dual monitor and wants to play a game across both of them, the problem is the option doesn't appear I think it might be the new driver he installed. I tried installing Hydravision which has an option to span across displays but it doesn't work can anyone help?
View 6 Replies View RelatedI have Dual monitor setup running on a NVIDIA Quadro FX 4500 driver: 191.00 (latest). Second monitor will not display.
Via Nvidia tool as well as control panel I get an error that the "configuration cannot be saved" when trying to extend my desktop.
Second monitor shows up as a choice, but will not display even when selected.
Monitor displays "data" during boot screens.
Any solutions on how to get windows/graphics card to see both monitors?
I have just built a new machine the last three weeks and finally last night I was ready to complete my final transfer from old to new computer. That meant adding my 2nd monitor to my new machine.
My graphics card is a GeForce 9400gt. I have the latest drivers from Nvidia's web site. New machine with Windows 7 has been working for 2 weeks with a single monitor.
Both monitors are fairly new. The graphics card has one DVI and one VGA input so I must set up my dual monitors that way,
My problem is when I hook up my 2nd Monitor I get the BSOD. I will spend 1 more night trying to fix it but that is it.
So my questions are as follows:
1. Does anymore have any ideas why The BSOD comes up when my 2nd monitor is plugged in?
2. Does anyone using Windows 7 have a working graphics card with a dual monitor set up that is working? If so, what card is it? I may be buying one tomorrow.
i have:
Windows XP pro (32 bit)
nVida GeForce FX 5200 has VGA;DVI;SVideo
ok heres what i did b4
i had 2 monitors one vga one and one dvi one and i hooked it up and i had i good dual monitor setup but when ever i loaded some programs the would give me a bsod screen and restart for example fsx dark basic and others that change resolution.
now....
i re installed nvida drivers and there updated (i think)
i have the DVI monitor hooked up right now with 1 display only
i have the desktop manager software enabled and running and the Nvida control pannel running.
and what i want to now is that i want to have a horizontal span setup (reason):
ok well i have seen that FSX can run on 2 monitors and that you can have a really cool display with both displaying images can i do this on a dual monitor setup or not or do i need to get a better card (preferably not)?
What to i do now?
ok so do i go to set up multipul monitors and do it that way or is there another way to do it better theres one last question, well i herd from a friend that in the display options like when you right click in the desktop then goto properties then settings. the friend said that there was an option to enable dual monitor support. before i had my setup i did not see that option and neither do i now im guessing that i don't have 2 monitors hooked up now.
I am obsessed about getting this to work so if i am making any of you people here mad i'm sorry and Thank-You for the help that you have given me recently, btw i got my processor to work and i got it hyperthreaded..
im new to connecting dual monitor
can some one help me to connect dual monitor
if i connect dual monitor will i able to give input seperately
can someone guide me!!!
Anyway i have 2 22" LCD Monitors and when i plug them in. Windows 7 does this weird thing were when you select the option to extend the desktop spanning from left to right. Instead of simply scrolling from the left screen to the right screen with your hand as you usually would with any OS, Windows 7 BETA somewhat reverses it were you have to scroll to the left from your 1st monitor to get the 2nd monitor. (sorry if this is really confusing im having a differculty writing this also haha)
And if you select your monitor on your left to be your primary monitor, it will wont do that it will move the it to your right monitor instead so i decided to physically switch the monitors around on my desk to get it normal. but i don't like the idea of my computer telling me what to do hahaha.
I know its a beta OS but its still based somewhat on vista. ive got the latest drivers for my graphics card and my graphics card is a NVIDIA 260GTX so its pretty meaty and it can do dual monitor fine on other os's.
I've searched the internet far and wide as well as these forums and have not been able to find the answer. Unfortunately, my sister-in-law's dog killed my 2nd monitor so I haven't been able to test on my own since installing the RC version last week. (new monitor will arrive next week)
My question:
If you RDP in Windows 7 from a computer with dual monitors to an XP computer with dual monitors is the multimon support available?
I want the session to feel as though I'm at work with dual monitors.... not just spanning the 2 monitors. My work computer runs windows xp.
Currently the only way to get this functionality in xp is to use the span command and to use add-in 3rd part software that does not work that great.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI'm running Windows 7 on a Compaq Presario CQ56.I've been having trouble with the multiple display settings changing on their own on my laptop. I've never had an external monitor hooked into my laptop, but for the past week or so my laptop will give me a notification that an external monitor has been plugged in, then it will disable though nothing has been change. I havan't downloaded anything recently besides windows updates.
View 1 Replies View Relatedi have just realized a problem, or a glitch in windows 7. i have a dual monitor and when i shift my icons into the other monitor and restart the icons just come back and don't stay in display 2, but come back to the primary monitor, any buddy have the same problem. its as though windows dint even save that change of mine, or does it have an option to put all icons on monitor 2.
View 4 Replies View RelatedI have two monitors, and would like to setup a different wallpaper for each monitor while retaining the expanded screen option. How to go about that? I am using a Radeon 4770 HD if that helps.
View 9 Replies View RelatedI'm having a small problem in Windows 7, and that is the two screens I am using have different resolutions & aspect ratios (1680x1050 and 1920x1080).
The problem is my second screen wallpaper stays the same size as my main monitor (1680x1050) instead of filling the entire area. I've tried all the different wallpaper options, Fill, Stretch, Centre, Tile etc, none seem to do anything. I have seen DisplayFusion (DisplayFusion: Multi-Monitor Taskbar and Desktop Wallpaper*|*Binary Fortress Software), but if possible i'd like to fix this little problem without third party software.
After I installed Windows 7, I had by tv connection still showing as a second monitor. Just the other day the display no longer shows anything but the sound is still coming from the tv. In properties the display only shows 1. I also tried detecting and nothing happened. I have a Radeon 9000 video card.
In device manager, other devices is showing video controller with a yellow !.
Monitor is showing - Generic Pnp Monitor
Display is showing Radeon 9250 9200 series